Home  Register  Jobs  CVs  Job Search  Worldwide  Process  Help  Search  Scams  JA  B  C
Oil Offshore Marine Careers in Onshore and Offshore Drilling Energy Industry Oil Offshore Marine: Oil & Gas Jobs & CVs Online recruitment services (job vacancies, resume/cv database search) for Oil Industry, Energy, Offshore, Petroleum, Engineering, Construction, Drilling, Subsea, Marine, Shipbuilding, Shipping, Petrochemical. Have your own FREE account! free cv upload registration on Oil-Offshore-Marine.com recruiter benefits: free job postings and cv search on Oil-Offshore-Marine.com
  Need to find something?
 
 Username:  
 Password:  
Oil Offshore Marine Register
 
  Remember my password?  
 Recruiters - Employers & Agencies
  Advertise / Contact Us
free cv upload for all job seekers, free access to oil and gas jobs
subscribe to oil careers alerts, oil jobs postings, drilling rig jobs, engineering jobs

 

CV Electrical Technician working in PETRODAR OPERATING COMPANY in SUDAN

 
Electrical Technician working in PETRODAR OPERATING COMPANY in SUDAN

Resume built for oil and gas job opportunities by a jobseeker with experience in Electrical Technician working in PETRODAR OPERATING COMPANY in SUDAN - would you like to offer this candidate a job/contract employment?

Please contact us OR search for another relevant oil CV/Resume in our impressive oil industry database

CV/Resume ID no.: 100078

Location (Residence): nagercoil, India
Citizenship: India
 
Languages:
  Native: Gujarati
  Other: Kannada
 
Education & Experience: Work Authorization & Relocation:
Education:
  Vocational in Electrical&Electronics Engg

Years of Experience: 16 years
Authorized to work in:
   Kuwait, Qatar, Sudan
Present Location:
   sudan, jabalayn
Relocation:
   Anywhere (International)
 
Expertise
Category Subcategory Ability Experience
Technician Level Electrical Basic 23 years
Plant (Refinery, Gas...) Gas Plant Basic 3 years
 
CV/Resume Details
 
1. Summary (Cover Letter) - CV/Resume Part 1 [Mandatory]

Working as a Electrical Technician in PETRODAR OPERATING COMPANY in SUDAN.

2. Work Experience - CV/Resume Part 2 [Mandatory]

 Performed Preventive Maintenance with Lockout/Tag-out (LOTO) procedures on motor control panels. Including MCC's, Switchgears, Motor Starter Breakers, UPS batteries & its chargers. Subsystems lightings and other control panel boards
 Assist Engineering Utility personnel during trouble shooting and preventive maintenance of medium and high voltages e.g. 33 KV especially during turn around or shutdown activities
 Performed functional testing in coordination with Instrument Technicians
 Performed calibration using a current injector on overload relays and contact resistances testing. Also using Surge Comparison Tester, Megger or Insulation Resistance Meter and Multi-tester.
 Construction, Operation, Maintenance in L.V, M.V and H.V switch gears 11KV, 33KV with ABB.
 Testing and Maintenance of Transformers up to 66/33KV, 90MVA to112.5MVA. (Insulation resistance test, Ratio test and transformer protection test, Bucholz relay, Pressure relief valve, Oil temperature and Winding temperature)
 A.C Hipot-test for Bus bar, Breaker
 D.C Hipot-test for Cables
 H.V Cables up to 33kv Glanding and termination.
 HVAC testing commissioning (schematic drawing under standing and motor solo run)
 Motor testing (Insulation resistance test, Winding resistance test).
 Earth fault relay test.
 Bus Duct Installation and maintenance
 Industrial wiring and lighting installation and maintenance.
 Checking of panel parts helping with Approved Drawings Physically
 Testing of panel internal and external wiring
 Performs routine, preventive and breakdown maintenance on all above equipment. Prepares and records all details of equipment maintenance, such as work carried out time involved etc
 Morning I use to take parting a routine meeting where we discuss our maintenance related issues.
 As per our schedule, we select that particular days P.M and get necessary work Permit required
 Next we collect all the tools required for that particular P.M
 Along with the work permit and required tools we proceed to that particular equipments location and after showing & getting the approval of that particular are as operator we isolate the equipment for starting P.M
 As per the standard norms and work practices we conduct and complete the P.M and take necessary readings also.
 After marking sure that all the dismantled parts are assembled back, we used to close the permit and put the equipment into service mode
 Handling MCC
 Handling EICS thro workstation
 Routine check up for all running electrical equipments
 Attend Shutdown and start up of the plant

 Performed Preventive Maintenance with Lockout/Tag-out (LOTO) procedures on motor control panels. Including MCC's, Switchgears, Motor Starter Breakers, UPS batteries & its chargers. Subsystems lightings and other control panel boards
 Assist Engineering Utility personnel during trouble shooting and preventive maintenance of medium and high voltages e.g. 33 KV especially during turn around or shutdown activities
 Performed functional testing in coordination with Instrument Technicians
 Performed calibration using a current injector on overload relays and contact resistances testing. Also using Surge Comparison Tester, Megger or Insulation Resistance Meter and Multi-tester.
 Construction, Operation, Maintenance in L.V, M.V and H.V switch gears 11KV, 33KV with ABB.
 Testing and Maintenance of Transformers up to 66/33KV, 90MVA to112.5MVA. (Insulation resistance test, Ratio test and transformer protection test, Bucholz relay, Pressure relief valve, Oil temperature and Winding temperature)
 A.C Hipot-test for Bus bar, Breaker
 D.C Hipot-test for Cables
 H.V Cables up to 33kv Glanding and termination.
 HVAC testing commissioning (schematic drawing under standing and motor solo run)
 Motor testing (Insulation resistance test, Winding resistance test).
 Earth fault relay test.
 Bus Duct Installation and maintenance
 Industrial wiring and lighting installation and maintenance.
 Checking of panel parts helping with Approved Drawings Physically
 Testing of panel internal and external wiring
 Performs routine, preventive and breakdown maintenance on all above equipment. Prepares and records all details of equipment maintenance, such as work carried out time involved etc
 Morning I use to take parting a routine meeting where we discuss our maintenance related issues.
 As per our schedule, we select that particular days P.M and get necessary work Permit required
 Next we collect all the tools required for that particular P.M
 Along with the work permit and required tools we proceed to that particular equipments location and after showing & getting the approval of that particular are as operator we isolate the equipment for starting P.M
 As per the standard norms and work practices we conduct and complete the P.M and take necessary readings also.
 After marking sure that all the dismantled parts are assembled back, we used to close the permit and put the equipment into service mode
 Handling MCC
 Handling EICS thro workstation
 Routine check up for all running electrical equipments
 Attend Shutdown and start up of the plant

 Performed Preventive Maintenance with Lockout/Tag-out (LOTO) procedures on motor control panels. Including MCC's, Switchgears, Motor Starter Breakers, UPS batteries & its chargers. Subsystems lightings and other control panel boards
 Assist Engineering Utility personnel during trouble shooting and preventive maintenance of medium and high voltages e.g. 33 KV especially during turn around or shutdown activities
 Performed functional testing in coordination with Instrument Technicians
 Performed calibration using a current injector on overload relays and contact resistances testing. Also using Surge Comparison Tester, Megger or Insulation Resistance Meter and Multi-tester.
 Construction, Operation, Maintenance in L.V, M.V and H.V switch gears 11KV, 33KV with ABB.
 Testing and Maintenance of Transformers up to 66/33KV, 90MVA to112.5MVA. (Insulation resistance test, Ratio test and transformer protection test, Bucholz relay, Pressure relief valve, Oil temperature and Winding temperature)
 A.C Hipot-test for Bus bar, Breaker
 D.C Hipot-test for Cables
 H.V Cables up to 33kv Glanding and termination.
 HVAC testing commissioning (schematic drawing under standing and motor solo run)
 Motor testing (Insulation resistance test, Winding resistance test).
 Earth fault relay test.
 Bus Duct Installation and maintenance
 Industrial wiring and lighting installation and maintenance.


3. Education & Training - CV/Resume Part 3 [Mandatory]

 Have done Diploma in Electrical and Electronics Engg. During 1989-1993 in first class at Govt.Polytechnic, through Board of Technical Education and Training TAMIL NADU


4. Computer Skills - CV/Resume Part 4 [Mandatory]
word
5. Other Skills - CV/Resume Part 5 [Optional]
-
6. Additional Information - CV/Resume Part 6 [Optional]
-


 

Questions about this candidate? Contact us for an immediate answer. To find similar people [or more experienced] - active jobseekers, please login OR create, FREE of charge, your own company account.

In order to view this candidate's contact information, you must a) be registered with Oil Offshore Marine - Worldwide Oil & Gas Jobs, and b) have already purchased a subscription.

Login Register Pricing Information
Electrical Technician working in PETRODAR OPERATING COMPANY in SUDAN
CV/Resume ID no.: 100078

Relevant CVs; view more oil and gas CVs
1. HVAC/R Journeyman with excellent technical experiance
2. Piping Superintendent/supervisor/engineer
3. Radio/Navigation/Instruments system including Radar
4. Electrical Technician Oil & Gas
5. SENIOR DOCUMENT CONTROLLER
6. Fertilizer, Petrochemical and LNG plants
7. Electrical Supervisor/Technician
8. Specialist Maintenance of Refinery and Petrochemical Plants
9. electrician and mechanic oil and gas experience
10. Oil & Gas, Petrochemical, Steel Plants
11. Electrical Engineer
12. Sr Electrical Supervisor
13. Electrical Engineer
14. Electrical Staff
15. Experienced Electrician (11 years +)
16. Document Controller, E&I Technician
17. Electrical and instrumentation, Project Engineering, maintenance
18. Instrument engineer, Oil and Gas industry
19. INSTRUMENT TECHNICIAN
20. Oil & Gas Operations and Maintenance Staff in Gail India, in Indrprastha Gas
 
 
Other CVs; view more oil and gas CVs
1. DCS Control Room Operator/Field Operator/Supervisor Process(Commissioning) Petronas Malaysia
2. Instrument, Control technician
3. Entry level postion, willing to work hard, up for new challenges.
4. QA Engineer & piping engineer
5. Explosives fields - Widely experienced (21 years +)
6. Chief engineer with experince on ships and shipyard, ship building
7. Radio Officer
8. Chef, Sous Chef
9. Quality Control & Follow-up Engineer for Local Fabrication at Doha Qatar
10. Electrical and instrument engineer / Electronic Engineer / Sales Engineer
11. Lab technician, cook, caterer, roustabout, tool pusher, Pumper
12. Chartered Accountant / Audit Performer
13. Experienced welder of 30 years+ in various industries, heavy industry, shipbuilding, petrochemical
14. Airport firefighter experienced in fighting oil/gas fires
15. E/I Turnover Engineer, QA /QC Engineer, Instrument Engineer, Instrument Supervisor, Foster Wheeler
16. Experienced person having good communication and language skills
17. Instrument and Control Commissioning Engineer Repsol YPF Teak Blow Down Project
18. Planning Construction / Operations Coordinator, PBS&J, Inc Houston Texas
19. Office Administrator reporting to Organizing Secretary and Conference Manager
20. Instrumentation and Controls Technician on petrochemical plants, water treatment, shipyards and FPSO
21. Ansys designer, experience in steel structural fabrication field
22. SAP FI/CO Consultant Egypt, SAP R/3 Financial Business Consultant Business Advisory Center Company
23. Chemical engineer working as marketing analyst Atlas Accelerator Seattle United States
24. Tanker C/O onboard Oil, Chemical and Gas tankers Malaysia Singapore Bangladesh Panama ships
25. Field / Control Room Operator Engro Polymer and Chemicals Karachi Pakistan, Bechtel Corporation USA
26. Plater, pipefitter and metal fabricator building steel and aluminum boats, structural steel erection
27. QC Piping/Welding Inspector LNG Construction, Consolidated Contractors International Company Qatar
28. TRAINEE GRADUATE WITH OIL FIELD ENGINEERING DIPLOMA, ASNT LEVEL 2
29. Sr Civil Draughtsman COWI & Larsen JV Oman, Shanfari Trading & Contracting UAE Sharjah and India
30. Time served pipefitter with 20 years commercial/industrial site experience, shipping or rigs jobs
 
 

Press Ctrl+D to Bookmark - Tell a Friend - Job Archives - Jobs - Oil and Gas CVs Resumes - Subscribe to Job Alerts - Site Map - Events - Legal - Privacy - Contact

oil offshore marine's website design

Official Blog - International Maritime Signal Flags - Glossary of Oil & Gas Jobs Definitions - Abbreviations & Acronyms from the Oil, Offshore, Marine, and Shipping Industries - Engineering Oil Jobs - Top 100 Energy Sites - Marine Jobs - Offshore Jobs - Oil Careers - Maritime Jobs - PDS/PDMS Oil & Gas Jobs - Oil Industry Jobs - Oil Field Jobs - Oil and Gas Careers - Petroleum Jobs - Oil Rig Jobs - Offshore Oil Rig Jobs - Drilling Jobs - Oil Industry - Official Sitemap - Jobs Feed - Login to your Oil-Offshore-Marine.com account

www.Oil-Offshore-Marine.com - Your Oil & Gas, Offshore, Construction, Shipping, Petrochemical, and Marine Engineering Recruitment Center.

© Oil Offshore Marine - Oil & Gas Jobs - All Rights Reserved.
This website is designed for international users, and its use is governed by Oil Offshore Marine - Oil & Gas Jobs Legal provisions. By browsing on any page of this website, you are deemed to have accepted all Oil Offshore Marine - Worldwide Center of Oil & Gas Jobs legal terms. If you do not agree with Oil Offshore Marine's legal provisions, you must stop using this website and its services.


find oil and gas jobs

  Looking for something?