CV Client Representative QA Inspector, Clients ExxonMobil Oceaneering Jacobs Engineering Subsea Systems

Resume built for oil and gas job opportunities by a jobseeker with experience in Client Representative QA Inspector, Clients ExxonMobil Oceaneering Jacobs Engineering Subsea Systems - would you like to offer this candidate a job/contract employment?

CV/Resume ID no.: 101073
Last Updated: Thursday, October 8, 2009

Ladies and Gentlemen:

This letter is to express my interest in discussing a position with your company.

The opportunity to work as a member of an organization such as yours is very appealing, and I believe that my experience and education will make me a competitive candidate for this position.

I confident that my previous experience and my willingness to accept the challenges of this position would indeed make me an excellent match.

I possess several key strengths and qualities that are detailed on my resume that I feel would be a valuable asset in your organization.

I look forward to speaking with you more and discussing the needs of your organization and my ability to meet them.

D&C Inspections 2009 – present

Clients – ExxonMobil, Oceaneering, Jacobs Engineering and Subsea Systems
Client Representative/Quality Assurance Inspector
Subsea Systems is fabricating 4”, 8” & 24” Piggable Wyes for the Exxon Mobil Mobile, Alabama Consolidation Project at the Subsea Systems Houston, TX location
• Served as consultant with responsibility for directing, controlling, and conducting the technical inspection and surveillance operations in support of fabrication of machined Wye components to flanges and pipe.
• Followed operation through Final NDE, PWHT, Hydro-testing and Coating


(D&C Inspections cont.)

Clients - Black & Veatch and Populus Terminal Transmission Partners
Client Representative/Resident Quality Assurance Inspector
Valmont Long Beach, CA and Brenham, TX locations. Total construction cost of components $129MM.
Valmont Industries are fabricating and galvanizing electrical transmission towers for Populus Terminal Transmission Partners for the Populus Terminal power plant in Utah.
• Served as consultant with responsibility for directing, controlling, and conducting the technical inspection and surveillance operations in support of fabrication and galvanizing of tubular steel electric transmission tower components.
• Utilized purchase order and industry codes and standards to establish additional requirements previously not covered in ITP and verified compliance with standards, specs and ITP. Welding performed to AWS D.1.1.
• Coordinated inspection activities with Quality Manager and held daily progress meetings with Plant Manager and/or Quality Manager. Reported to client PT.
• Interfaced with the Contractor’s Quality personnel to ensure that Contractor stewards resolution of issues in alignment with Project requirements.


CCI Inspection 2009 - present
Clients – Chevron, J. Ray McDermott and Cameron Valves
Client Representative/Resident Quality Assurance Inspector
Cameron Valves is building valve assemblies for the Chevron Platong II Project.
• Conducted final inspection of protective coatings on valves in the Houston, TX area at Gartner Coatings, Lockwood Valves and Trident Crating


Fircroft Recruitment 2007 - 2009
Client - Exxon Mobil Development Corporation/Golden Pass Pipeline
A 73 mile/$70MM pipeline project from Golden Pass LNG Terminal.
Quality Assurance Inspector
Onsite Quality Advisor for Protective Coatings and Welding Inspection
• Provided technical service by coordination of efforts in application of protective coating system on 42” pipeline originating at LNG terminal and on interconnect sites
• Advised contractor who had little experience and knowledge of Exxon/Mobil specifications or with Industry Standards or Codes.
- Put together the code and specification manuals for the 9 crews
- Monitored and conducted whatever training was necessary.
- Assisted the contractor in writing their coating procedure as they did not have one.
- Tested and qualified all personnel.
• Responsible for examination of finished work and coordinated efforts of up to 9 coating and/or utility inspectors and up to 70 members of various coating crews.
• Coordinated final visual inspection of double-joint welds in field to ensure conformance with contract documents and API 1104 as final VT could not be performed at the double joint rack. Also performed final VT of field welds after surface preparation and prior to coating


JRJ Energy Services 2007
Plains All American Pipeline
Sr. Welding Inspector
• Welding and Coating Inspector on Construction of crude oil storage tanks, associated piping and pipelines, and application of protective coatings at St. James, LA Terminal.
• Responsible for observation of work in progress to ensure that procedures and materials conform to contract and applicable codes including API 1104 and API 650


Tulsa Inspection Resources 2006-2007
Buckeye Pipeline and Valero
Sr. Welding Inspector
• Welding Inspector on 12” refined products pipeline.
• Responsible for observation of work in progress to ensure that procedures and materials conform to contract documents and applicable codes including API 1104 and NACE Standards


KTA-Tator 2005 - 2006
Client - Maryland State Highway Administration 2006
Welding and Coating Inspector
• Responsible for surveillance of inspection of fabricated components including beams, pipe, plate and railing for the Woodrow Wilson Bridge


Client - Carter Burgess 2006
Project Professional
• Responsible for conducting survey and testing of abrasive blast cleaning methods and materials, and coating materials for future use on the Dallas North Tollway and the President George Bush Turnpike for the North Texas Tollway Authority


Parsons-Brinkerhoff Construction Services & Dichem Corp. 2005 - 2006
Construction Inspector
• Performed hurricane damage assessment and construction inspection of Halliburton and MI Swaco drilling fluid plants in Louisiana after hurricanes Rita and Katrina
• Letter of commendation and award from KTA


GE Energy 2005
Client - Pipeline Integrity International
Pipeline Inspection Technician
• Responsible for operation of intelligent pipeline inspection tool (Smart PIG) and for gathering and downloading data generated during inspection run


Offshore Consultants, Inc 2004
Exxon Deepwater Development
Quality Assurance Inspector
• Provided technical services during Quad Joint Construction and Pipe in Pipe insertion at the Bredero Price Mobile, Alabama for the Kizomba project


Union Tank Car Company 2004
Welding and Coating Inspector
• Performed quality control activities including weld inspection, surface preparation inspection and interior lining inspection on newly constructed railroad tank cars


Swain and Associates 2003 - 2004
Quality Assurance Inspector
• Performed various construction inspection activities during construction of municipal water tanks and oil and gas equipment


Glenn Tech International 2003
Client - Williams Energy
Quality Control Inspector
• Inspection of protective coatings / FBE and multi-layer specialty coatings for line pipe at Technip Offshore Contractors Spoolbase for the pipeline portion of Devil’s Tower


Moody International 2002 - 2004
Quality Assurance Inspector / Technical Specialist
• Performed QA activities during application of protective coatings for structural steel, pipe and other equipment for on and offshore pipeline projects


Llano Technical Services 2002
Client - Shell Deepwater Development
Quality Assurance Inspector

• Provided technical services during Quad Joint Construction and Pipe in Pipe insertion at the Bredero Price Mobile, Alabama for the Nakika project


Commercial Coating Services, Inc/ Offshore Joint Services 1992 - 2003
Technician
• Gained technical skills and knowledge in pipeline construction and services for various clients.

NACE Certified Coating Inspector-Level 3
- AWS Certified Welding Inspector
- ASNT ACCP Level II Visual Testing
- ASNT SNT-TC-1A Qualified-MT, PT and Film Interpretation (Level II)
- SafeGulf Certification – ISN
- Houston Area Safety Council-Basic Plus Course
- McMillan Offshore – Water Survival/Helicopter Underwater Survival Training
Management Development:
- Dale Carnegie Effective Communications and Human Relations
- Zig Ziglar Courses (self improvement and people skills)

Proficient in Windows based software and programs.

: Quality Assurance and Inspection professional with cross-functional expertise in a wide range of construction and energy related disciplines. Experience gained over more than 20 years in the field combines skills and business acumen to provide highly regarded Client Representative approach to achieving project objectives. Interested in continuing to develop management career.