CV Service Engineer, MacGREGOR (ARE) Gulf LLC Mussafah Abu Dhabi UAE National Drilling Company Offshore

Resume built for oil and gas job opportunities by a jobseeker with experience in Service Engineer, MacGREGOR (ARE) Gulf LLC Mussafah Abu Dhabi UAE National Drilling Company Offshore - would you like to offer this candidate a job/contract employment?

CV/Resume ID no.: 104635

My Field of Engineering services and experience, is promted me to join an offshore industry. It is my desire to work this field, base on my experience I love to work this, if given a priorities. My knowledge and experience are the key and path to be apart of this company. I have been work in Ship and Offshore service as a Service Engineer in MacGregor. Knowledge in Facilities Operation and Maintenance, trainings and additional experience, please refer to my qualification stated below.

Service Engineer
Macgregor Service Academy November 17, 2008 – October31,2009
MacGREGOR (ARE) Gulf LLC
Mussafah, Abu Dhabi, UAE

JOB DESCRIPTION:

o Junior Service Engineer (Hydraulic equipments)
o Responsible for servicing and overhauling of Deck cranes, Towing winch, Hatch cover system, Mobile cranes, Graders, Mixers, Forklift and other hydraulic equipments.
o Repair, Overhauling, Disassembly and Assembly of Pumps (Parker, Sunstrands, Danfoss Sauer, Rexroth) Motors (Parker, Kawasaki, Eaton, Rexroth) and Hydraulic Cylinders.
o Repair and Overhauling of relief valves, counter balance, directional valves gear box, acquitors and other hydraulics devices.
o Performed flushing and pressure testing for hydraulic pipes and hoses especially in Ship and Offshore Industry.
o Performed Hydro-testing and water jetting.
o Performed testing of hydraulic equipments using Test Bench to test the functionality and efficiency , especially pumps, motors and cylinders etc.
o Performed Commissioning and Testing of newly installed Cranes, Hatch Covers and other Hydraulics accessories.
o Prepared Service report after fixing hydraulics equipment to the customer as authorized by Manager.
o Onboard Care of Ship and Offshore Industry as required by the company.
o Performed and revised Hydraulics equipment drawing and schematics diagram of any revision has been made during troubleshooting.
o Leads the operation of Generators, Hagglunds(Hydraulic Motors), Test Bench Motors before and after operation.
o Performed other related work as assigned.


Ship And Offshore Services

August 18 – Sept. 10, 2009
National Drilling Company (Offshore- ADYARD)
Mussafah Abu Dhabbi
Service Done: Conducted Flushing of pipe, Checked all Hydraulic lines and equipment and commissioning of newly installed Hydraulics pump and motor.


August 28 – 30, 2009
M/V Zakher Maritime
Service Done: Replaced new Brake Clutch of 20T Crane. Testing and Commisioning after service done.


Sept. 10 – 12, 2009
M/V OMN Anteia
Service Done: Replaced 2 Kawasaki Staffa Motor
Testing and Commisioing after service done.


Sept 23 – 28, 2009
NIWA (Etisalat SHIP)
Service Done: Disassembly & Assembly of 2 Cranes capacity 20T.
Replaced Hydraulics part of cranes, flushing of pipe
& testing & commissioning after work done.


October 8 – 12, 2009
ZaKHER DELMON
Service Done: Pulled-out 4 Hydraulic cylinder and repair & replaced damage parts. Assemble and Performed testing & commissioning after service done
Disassembly & Assembly of 2 Kawasaki Staffa Motors.
Testing & Commissioning after work done.


October 12- 14, 2009
A – 56 Navy Coast Guard Ship UAE
Service Done: Flushing of Hydraulics pipe, checking of leakages, Testing and Commissioning after service done.


October 21 – 25, 2009
LEEN Accommodation Ship
Service Done: Disassembly & Assembly of Gear Box.
Fix Disc Brake problem of Winch, Crane Capacity 10T
Testing & Commissioning after service done.


October 26 – 28, 2009
M/V Zakher Maridive MOS
Sevice Done: Replaced Pump & Motor of Crane Capacity 5T
Installed and assemble newly Motor & Pump.
Testing & Commissioning after service done.


FACILITIES TECHNICIAN
SUN POWER MANUFACTURING LIMITED
100 East, Main Avenue Laguna Techno Park, Binan Laguna
June 20, 2005 to November 12, 2008

o Leads the Operation and Maintenance of Power System (Meralco, Gensets, UPS), Chiller System, Process and House Vacuum, HVAC, Water Supply System (Industrial, Domestec), Process Cooling and Heating System, General Exhaust and Facility Maintenance System.
o Implement preventive and corrective maintenance of machineries / facilities equipment, proper start-up and shutdown and monitoring of facilities equipment particularly

 220v and 480v Uninterruptible Power Supply units , Make-up Air Units.
Air Handling Units , 500 Toner Chillers, 3-2MW 6.6KV Diesel Generators,
2-7.5MVA (34.5KV/6.6KV), 2-3MVA (6.6KV/480V) Power Transformers,
4-2MVA(6.6KV/220V) Power transformers, 34.5kV Switchgears, 6.6kV Main distribution boards and 480v-110v panel boards, Fan Filter Units, Process & house vacuums, Process Cooling water,
Heat exchangers, Compressed Dry Air, Regenerative & refrigerated dryers, Fire Alarm System , Fire Pump System , Acid Scrubber System , Exhaust and Supply Fan.

o Prepares power consumption reports including UPS loading status and explain to department team.
o Performs and assist contractors for maintenance of equipment related to production and facilities equipment.
o Prepares Standard Operating Procedure of Facilities equipment.
o Determines and prepares the requisition of all necessary spare parts.
o Supervises projects installation and performs commissioning of newly installed equipment such as fire pumps, Exhaust Fan, Booster Fan, Chiller, Generator and compressor among others.
o reports to top management when there’s a shutdown on facilities equipment.
o Signs all working permits of all contractors as authorized by Department Manager.
o Facility equipment problem solving and analysis.
o Prepares materials and Active member of Emergency Response Team (ERT).
o Identify and implement enercon programs in support to deparmental goals and objectives.
o Performs other duties as required.


MAINTENANCE TECHNICIAN
KAWASAKI MOTORS CORPORATION
Km. 25 East Service Road, Muntinlupa City
February 2004 to July 2004
May 2005 to June 15 2005

o Knowledgeable in Operation, Basic Maintenance and Trouble-shooting of CNC Machines HN50B Niigata Fanuc 16-M Control, PN40 Niigata Fanuc 15-M and 16-M Control, Fanuc RoboDrill ά-T10C Fanuc Series 16-M Control, Fanuc Drill Mate T-Model 10 Fanuc Series 18-M Control and Fanuc Tape Drill Mate-Model T Fanuc Series 0-M Control

o Set-up Machining Standard and Inspection Standard for products to be machined. Set-up Standard Operating Procedure for equipment and work process.
o Set-up Machineries and create program for the recommended set-up. Lead Trial Machining and Pilot Production for New Models. Issue concerned Departments Daily Production Output, Machining Standard and Inspection Standard for proper monitoring.
o Support Daily Production Operation. Check and evaluate work piece for each Line if it conforms to Standard Specifications as in Product Drawing. Conduct Time and Motion Study to determine Daily Production Output. Update Machining Standard, Inspection Standard and Standard Job Sheet. Improve CNC Programs as well as jigs and fixtures to increase Productivity.
o Develop equipment specifications, layouts, flow sheets, PFD’s (Process Flow Diagrams).
o Operates Compressor supporting Production line and performed trouble shooting.


QUALITY CONTROL STAFF
HONDA PHILIPPINES, INC.
Km. 17, East Service Road, Paranaque City
October 2002 to March 2003

o Responsible for local parts inspection.
o Participated in creating product quality improvement team.
o Responsible in product qualification in conformance with the required specifications and standard of product design.
o Performed product inspection though inspection jigs, and other measuring and test equipment.
o Reviewed product quality performance, prepares improvement plans and conduct process audit to meet the target acceptance rate per product.
o Generated and maintains reports/ documentation related to qualify management system activities.


MECHANICAL MAINTENANCE
PHILIPPINE PHOSPATE FERTILIZER COMPANY
Lide Isabel Leyte
June 2001 to March 2002


o Performs repairs of plant equipments such as pumps, motors, boilers, heat exchangers, leaking steam lines, etc.,
o Performs welding works on piping lines and other utilities.
o Responsible for proper installation of pipes, valves, firings, etc.,
o Conducts periodic maintenance of boilers plant furnaces
o Responsible for monitoring of metrics gauges and its condition.
o Conduct periodic lubrication on equipment’s parts and accessories.
o Operates conveyors, rotary feeders, and other mobile equipments.


WELDER / MACHINIST
PHESCHEM INDUSTRIAL CORPORATION
Cantandoy Palompon Leyte
November 2000 to May 2001

o Performs welding of pipes, leaking steam lines and other plant equipment.
o Assists in all machinery works such as lathe machine, grinder, compressor, etc.

Bachelor of Science in Mechanical Engineering

Apprenticeship
Pheschem Industrial Corporation
October 12, 1999 to November 12, 1999

On the Job Training :
Philippine Phosphate Fertilizer Company, as Mechanical maintenance.
April 2000 to May 200

SEMINAR ON PNEUMATICS
conducted by Festo, Inc.,Technological Center, University of San Carlos
February 17, 2000

SEMINAR ON BASIC PROGRAMMABLE LOGIC CONTROLLER (PLC)
conducted by Festo, Inc.
Festo Training Center, Mandaue Cebu
March 15, 2000


PRESENTATION ON WATER TUBE BOILER PRESSURE PARTS FABRICATION conducted by Babcock-Hitachi (Philippines) Inc.
City Hotel, Lahug, Cebu City
August 3 to 6 1999 at Waterfront Cebu


FUNDAMENTAL OF PRACTICAL,INDUSTRIAL ELECTRONICS &
TROUBLESHOOTING
Conducted by: MERALCO FOUNDATION TRAINING (MFI) Calamba City
January 3 to February 22, 2008

FAMILIARIZATION & TRAINING ON OPERATION & MAINTENANCE
OF CVHF CHILLERS WITH CH530 CONTROL
Conducted by: TRANE at Sunpower Fab2 Batangas
September 5, 2007

Basic PLC Programming using CJ1M and ZEN Programmable Relay
Conducted by: OMRON ASIA PACIFIC PTE. LTD
March 11, 2008

SEMINAR ON ENERGY SAVINGS IN PNEUMATIC SYSTEM
Conducted by: Shoketsu SMC Corporation
June 07, 2008


SUNPOWER In-house Trainings and Seminars

o Cooling Towers
o Schneider Breakers
o AC Motor Controls
o 1300KVA UB-R Piller, Uninterruptible Power Supply (UPS)
o Toxic Gas Monitoring System (TGMS) – Vertex & Sieger Gas analyzer
o Facilities Management System (FMS)
o 8 Discipline, Root Cause and Corrective Action and Poka yoke
o Various Emergency Response Team (ERT) Seminars/trainings
o Variable Frequency Drive (VFD)
o Statistical Process Control. – Training On-going (SPC Level 1 – Done/ Level 3 /SPC level On-going)
o Seminar on relay coordination and short circuit study.
o Operation & Control Mitsubishi Generators.
o Tool Lockdown, 7QC tool
o CVHF/CH530 Chiller Training
o Failure Mode Effect Analysis
o PLC Scada
o Personal Effectiveness Training
o Presentation skills
o Microsoft & Power point
o Mitsubishi Training in Genset Operation.
o Graphical Unit Interface Training
o Auto Correlation
o Techical Training( Why, Why Analysis, POKA YOKE, 5’S, Preventive Maintenance Organization, Bolt & Nuts, Optimizing Equipment Effeciency, Physics of Semi-conductor, Thermoscanning).
o Mechanical Transmission, Magnets.
o Discipline Workmanship


MacGREGOR Trainings

MacGREGOR Service Academy
o Theoretical and practical training for Service Engineer
o Deck cranes, Hatch Covers and RoRo equipment

Marine Electro-Technology
o Technological University of the Philippines
o Manila, Philippines

Basic Safety
o Magsaysay Training Center
o Manila, Philippines
o Personal Survival Techniques
o Fire Prevention and Fire Fighting
o Elementary first aid
o Personal Safety and Social Responsibility

Shipboard Welding Course
o Welding Industries of the Philippines, INC
o Quezon city, Philippines

Maritime English
o Magsaysay Training Center
o Manila, Philippines

Principles of Effective People (cultural differences)
o Magsaysay Training Center
o Manila, Philippines

Managing Human Error
o Magsaysay Training Center
o Manila, Philippines

Computer literate and can use Microsoft Office (Word, Excel and PowerPoint)

o Knowledge in Hydraulics equipment and can interpret Hydraulics drawing and Schematics
o Knowledgeable in the operation and maintenance of Facility equipments (MAU, HVAC, PVA, CDA, GenSet, Fire Pump, Chiller, Cooling Tower, FCU.
o Knowledgeable in Class 100, 10K clean room standards
o Knowledgeable in Safety procedures
o Knowledgeable in Facility Maintenance System (FMS or BMS)
o Can interpret Engineering Drawings and Schematics
o QC Tools - ( Trouble Shooting)
o Driving – with professional license
o Forklift and Golf Car operation