CV Project Engineer Hindalco Industries Aditya Birla Group Company Synthesis EPC Projects Ltd. India

Resume built for oil and gas job opportunities by a jobseeker with experience in Project Engineer Hindalco Industries Aditya Birla Group Company Synthesis EPC Projects Ltd. India - would you like to offer this candidate a job/contract employment?

CV/Resume ID no.: 105221
Last Updated: Thursday, March 4, 2010

Dear Sir,

Im a project Engineering and Management professional working since 2003

My experience and exposure areas are:
• Co-ordination between design, planning, quality, procurement & production department for all aspects related to Mechanical, Electrical & Instrumentation equipment and materials.
• Progress monitoring & expediting.
• Coordination with quality assurance department to finalize QAP and further stage inspections, tests and trials.
• Fabrication drawings preparation for Static equipments
• Coordination with purchase department to provide enquiry specifications.
• Coordination with quality assurance department to finalize QAP.
• Defining scope of supply for selected vendors.
• Setting up with project quality systems.
• Establishment of QAP and procedures.
• Conducting QC inspection at vendor works. Review of QC reports.
• Supervision, coordination and follow-up with vendors for the fabrication of process equipments.
• Supervision and co ordination of fabrication ,erection and alignment of equipments and flow
lines.
• Coordination of pre-commissioning testing, commissioning, load trials.

From Feb 2008 : Hindalco Industries Ltd.,
(Aditya Birla Group Company)
BHARUCH, GUJRAT
Designation : Engineer- Projects
Current CTC : 5.8 Lacs.pa.
Projects :
• Fabrication and erection of ESP handling 23000 M3 /hr gas flow with a dust load of 80 g / M3 and dust collection efficiency of 99 %. Design supplied by M/s. Lurgi India Ltd. in a period of 28 days.
• Fabrication and erection of ESP handling 15000 M3 /hr gas flow with a dust load of 100 g / M3 and dust collection efficiency of 99 %. Design supplied by M/s. Alstom India Ltd. in a period of 18 days.
• Overhauling, erection and alignment of Used CCR (Continuous Cast Rod) Plant at Birla Copper of M/ s. Hinalco Industries Limited.
(Major equipment include Melting furnace (7 MT/ hr), Holding Furnace, Casting Wheel, Rolling Mill, Coiling Unit and Pumps, Tanks, cooling towers etc. )


Jan 2007-Jan 2008 : Synthesis EPC Projects Ltd.,
BARODA, GUJRAT
Designation : Engineer- Projects
Current CTC : 2.7 Lacs.pa.
Projects :
• Up gradation of 20TPD Milk Powder Plant at M/s. Banas Dairy ,Palanpur, Banaskatta.
• Sulphur-di-oxide scrubbing system at M/s. Gujarat Flurochemicals Ltd.,
Ranjitnagar,Panchmahal.
(Major equipment include Spray Dryer (20 MT/day), Fluidizing beds, Calandria (heat exchanger),Jet Scrubbers and Pumps, compressors, blowers, Tanks etc.)


Dec.2005 -Dec.2006 : Synthesis TREATMENT TECHNOLOGIES Inc.,
BARODA, GUJRAT
Designation : Project Engineer
Projects :
• CTC Incineration Plant at M/s. Gujarat Flurochemicals Ltd., Dahej, Bharuch.
• Solid Waste Incineration Plant at M/s. E.I Dupont Pvt. Ltd., GIDC Savli, Baroda
(Major equipment include Incineration Furnaces (Primary &Secondary),
Jet Scrubbers and Pumps, compressors, blowers, Tanks etc.)


June 2005 - Dec. 2005 : Synthesis DRYCON Inc., BARODA, GUJARAT.
Designation : Project Engineer
Projects :
• Up gradation of 30 TPD Milk Powder Powder Plant at M/s. Banas Dairy,
Palanpur, Banaskatha.
(Major equipment include Spray Dryer (30 MT/day), Fluidizing beds,
Calandria (heat exchanger)and Pumps, compressors, blowers, Tanks etc.)


Jan 2004 - May. 2005 : Alfa Laval India Ltd., Banglore, Karnataka.
Designation : Site Engineer (On Contract)
Projects:
Insulin Fermentation Plant at M/s. Biocon India Ltd. Bangalore,
Karnataka
(Major equipment includes Fermentation tanks, reaction vessels and Pumps, Tanks etc.)


July 2002 to Dec. 2003 : Universal Heat Exchangers Ltd. Coimbatore,
Tamilnadu
Designation : Junior shop Engineer

Exposure: Fabrication of pressure vessels, tanks, reactors etc.

EDUCATIONAL QUALIFICATIONS
• Bachelor of Technology in Mechanical Engineering, College of Engineering, Trivandrum, University of Kerala, 2002, 60%
• AISSCE, Central Board of Secondary Educatoin, 1996, 76%
• AISSE, Central Board of Secondary Education, 1994, 72%

COMPUTER AWARENESS
CAD Applications : Auto CAD 2004, 2006
Operating Systems : Windows 98 / Me / XP
Documentation package : MS Office, MS Projects

Drafting skills in Autocad