CV MWD/LWD Engineer Halliburton Sperry Drilling Services Pakistan, Logging Geologist Baker Hughes Inteq

Resume built for oil and gas job opportunities by a jobseeker with experience in MWD/LWD Engineer Halliburton Sperry Drilling Services Pakistan, Logging Geologist Baker Hughes Inteq - would you like to offer this candidate a job/contract employment?

CV/Resume ID no.: 106839
Last Updated: Tuesday, September 14, 2010

Currently Working With Halliburton Pakistan as MWD Engineer

Worked as Operations Supervisor for SDL (Halliburton) Pakistan
Worked as Wellsite Geologist (Halliburton sperry) Pakistan
Worked as Data & Pressure Engineer for Halliburton sperry) Pakistan
Worked as Data Engineer for BHI (Pakistan)

Feb 2009- todate Sperry Drilling Services Pakistan
MWD Engineer

Worked on Direction While Drilling,
Direction Gamma While Drilling &
Triple combo (DGR-CTN-SLD-EWR-DIR) jobs.

Currently working as MWD Engineer with Halliburton (Sperry Drilling Services). Worked for ADCO, ADMA and ZADCO on both onshore and offshore in Abu Dhabi and POL and ENI in Pakistan.
Worked on DWD, DGWD and Triple combo in Abu Dhabi.
Currently working as DWD/DGWD in Pakistan for ENI Pakistan.


Oct 2007- Feb 2009 Sperry Drilling Services Pakistan
SDL Operations Supervisor

Worked as an Operations Supervisor for Mud logging in Pakistan. Responsible for the overall service quality of 7 x mud Logging jobs (communication with clients on rigs and in Town, responsible for sales, new contract. bids/tenders, invoicing, unit spares, Engineers hiring and training, co ordination of client activity and service requirement by visiting clients, company representative and mud logging units on rig site, equipment trouble shooting from town and at rig site by providing technical support and review of equipment status, review of operation support capabilities & requirements, crew changes, organizational co ordination of well information files and technical issues, personal evaluation performance review & approval of promotion and transfer, monitoring of forecast unit activity and monthly review. Planning to reduce cost without compromising on service quality and safety.

Dec 2005- Oct 2007 Sperry Drilling Services Pakistan
Wellsite Geologist

Working as a Wellsite Geologist;

Responsible for describing ditch cuttings, core description and sidewall core descriptions. Supervising mud logging unit, witnesses wire line logging.

Major Responsibilities:

 Help and assist Drilling superintendent in drilling a well.
 Frequently updating and communicate with Town Geologist.
 Responsible for Daily reporting
 Responsible for describing ditch cutting samples & shows evaluation.
 Selecting casing & core points.
 Describing cores and sidewall cores.
 Marking formation tops.
 Supervising Mud logging unit.
 Witnesses Wire line logging
 Preparation of Composite log


April 1996-Dec 2005 Sperry-Sun drilling Pakistan/ M.E region
ADT/ Pressure Evaluation Geologist

Presently working with Sperry- Sun Drilling Services;
Assigned to various customers around the region, working on Exploratory, development and Horizontal wells as an ADT Engineer. Worked on onshore & offshore rigs running LS-2000 and INSITE-Rig site Plus (Integrated System for Information Technology & Engineering) Computerized Unit.
Responsible for overall service quality and responding to client requirements. Surveillance, monitoring and acquisition of geological and drilling parameters during rig operations. Analysis and description of drilled cuttings. Estimation and calculation of Pore pressure analysis, preparation of pressure logs. Prepare and compile final well report. Transmit data and logs through modem and mail to client office in town.

Major Responsibilities:

• Help and assist Drilling superintendent, Drilling Engineer and well site Geologist in drilling a well.
• Calculate & optimize bit Hydraulics.
• Assist well site Geologist in selecting Core point, casing point and mark formation tops.
• Estimate and calculate Formation pore pressure using various methods.
• Calculate fracture pressure.
• Compilation of Final Well report & Final Well logs.
• Run MSS survey tool ( Magnetic Single Shot)


Dec 1992-Oct 1995 Baker Hughes Inteq Pakistan
Logging Geologist

Basic duties were routine Mudlogging; assist Data Engineers in monitoring Drilling and abnormal pressure evaluation. Help and assist the well site geologist in formation evaluation and reporting technical data.

Major Responsibilities:

• Preparation of Mud log and daily/weekly geological reports.
• Lithological description of the cutting samples and core chip analysis.
• Identifying Formation tops, coring point, casing point at the wellsite.
• Monitor Hydrocarbon shows, gas and its Chromatography
• Monitor drilling parameters and presences of hazardous gasses like H2S.
• Rig up and Rig down, installation of different sensors and detectors.

 LWD1 School Sep-Oct 2009 Sperry (Cairo, Egypt)
(Gamma, Resistivity, Density, Porosity, Direction, Pulsers)
 Radiation course Oct 2009 Sperry (Cairo, Egypt)
 H2S and Sea Survival Feb 2009 Abu Dhabi
 Basic Wire line interpretation Course, OGTI Islamabad Pakistan, March, 2006
 H2S Safety Awareness School, 2001 Sperry-Sun (Saudi Arabia).
 ADT School (Pressure Evaluation) 1997, Sperry-Sun (Cairo, Egypt).
 LS-2000 System, Gas system, 1996, Sperry-Sun (Cairo, Egypt)
 Basic “INSITE” 1999, Sperry-Sun (Islamabad, Pakistan).
 INSITE System, 2000, Sperry-Sun (Dubai, U.A.E)
 Advance Mud logging 1994, BHI ( Cairo, Egypt)
 Worked for AMACO Pakistan in Kahi-1 & Sumari-1 well, Kohat Block.
 Worked for OMV Pakistan in Miano-1, Miano-2, Miano-3, Miano-4, Miano-7, Khipro-1, Sawan-3, Sawan-8 and Sawan-9 in Miano & Sawan Blocks.
 Worked Pakistan Oil fields in Pariwali-1, Pariwali-3, Pindori-3, Pindori-5 & Turkwal Deep x-2 wells in Potwar region.
 Worked for Pakistan Petroleum Ltd in Adhi-12 and Kallar x-1(Deepest well in Pakistan) in Potwar region.
 Worked for Nimir Petroleum in Yemen.
 Worked for British Gas in Savi Ragha-1, Gulan-1 Suleman ranges Baluchistan.
 Worked for Union Texas (BP) in Marvi-1 Deep well.
 Worked for Maersk Oil Qatar Off shore in many Horizontal wells.
 Worked for Q.G.P.C in on shore in many Horizontal wells (Dukhan area).
 Worked for LASMO OIL in Kadanwari field, Bhit-7, BMK-1, Andhar-1 and wells in Kirthar range Sind.
 Worked for ARAMCO Saudi Arabia in many Horizontal well( Qatif area).
 Worked for Premier Oil in Dureji-1, Zarghun North-1, Benir-2, Zirkani-1 and Chung-1 wells in Kirthar range.
 Worked For ENI in Kadanwari & Bhit Gas fields.
 Worked for POL in Pariwali-5 and Pindori-6 Deep wells in Potwar region.
 Worked as a Well site Geologist with PETRONAS CARGALI Pakistan at Mehar North-1 & Mehar-2 Wells.
 Worked for Eni Pakistan as a Well site Geologist at Kadanwari-15
 Worked For PPL at Adhi-18
 Worked for Eni Pakistan as a Well site Geologist at Bhit-12.

1992 Peshawar University Peshawar
Msc in Geology (First Division)
Major Subjects
 Sedimentology
 Petroleum Geology
 Engineering Geology
 Remote Sensing Geology

1991 Peshawar University Peshawar
Bsc (Hons) in Geology (First Division)
Major Subjects
 Geology Major
 Chemistry & Physics
 Math’s & Statistics as subsidiary

Proficient in using MS Office and Windows NT/2000/ XP/ Environment.

Worked as Operations Supervisor