CV Expatriate Inspection Engineer working in Oil & Gas, Refinery, Pipelines & Petrochemical industries

Resume built for oil and gas job opportunities by a jobseeker with experience in Expatriate Inspection Engineer working in Oil & Gas, Refinery, Pipelines & Petrochemical industries - would you like to offer this candidate a job/contract employment?

CV/Resume ID no.: 108832
Last Updated: Sunday, March 21, 2010

A Mechanical Engineer over 9 years of experience in Piping, Welding & Mechanical inspection activities related to Oil & Gas, Refinery and Pipelines & Petrochemical industries. Technically sound & Confident Inspection Engineer with a broad based expertise in development & implementation of Quality Plans, Inspection test plans, Job procedures & site inspections for successful & timely completion of the project.

A progressive career with various fields possesses strong coordination, communication, investigative / problem solving skills coupled with high degree of drive & determination.

Specific expertise:

• Development of Project Quality Plans, Quality Assurance Plans, Inspection Test Plans & Job procedures for various construction activities like Structural, Piping, Pipelines, and Painting.

• Preparation & Qualification of Welding Procedures & Welders for CS, AS, SS, NACE, LTCS Materials as per ASME, ASTM, AWS, API ,ANSI & IS codes.

• Preparation, Review of NDE Procedures & Interpretation of weld discontinuities by various NDT methods like RT, UT, DPT, MPT & Visual Examinations as per code requirements.

• Online inspection and expediting of Critical Equipment including ASME code stamping jobs, during various stages of fabrication at supplier’s works as directed.

• Inspection of in-coming Piping and Mechanical materials for confirmation with Purchase Orders, Relevant Codes, Standards and Specifications.

• Final inspection of piping systems (including high pressure & high temperature systems) and equipments both for Hydrotesting & plant turnarounds and coordinating these functions with Construction Contractors & client’s Engineering, Maintenance & Operation groups.

• Inspected / familiar with Hot Tapping & Tie in works for Pipelines and plant piping.

• PMI checking of ALLOY STEEL and S.S.

• Installation and Inspection of Pig Launcher/Receivers.

• Installation & alignment Inspection of Rotary & Static Equipments.

• Inspection of Painting, Insulation, Wrapping and Coating works.

• Conducted regular toolbox meetings with Construction & Inspection supervisors, fabricators, welders & other construction personnel to enhance the quality of the jobs.

• Well versed with preparation and review of Q.C.Dossiers, Manufacturers Data Books, Partial Data Records and establishment of Quality Documentation Systems to ISO standards and Project / Client requirements.


Work Experience:

 Dec 2007 To Till date Working as a WELDING INSPECTOR in CHIYODA –TECHNIP JOINT VENTURE in QATAR . ( Qatar Gas Onshore 3 & 4 Projects )

 May.2006 To 2007 Nov-2007 ,QA/QC ENGINEER
Gulf Spic Contracting Company W.L.L.,KUWAIT.

• Worked as QA/QC ENGINEER for GC-28 EXPANSION FOR COMPRESSION AND MEDIUM CRUDE PROCESSING,CLIENT:M/S TECNICAS REUNIDAS ,SPAIN / KUWAIT OIL COMPANY.

JOBDESCRIPTION:
1. QUALITY PLAN AND PROCEDURES SUB-MISSION
2. WPS & PQR SUBMISSION FOR C.S,S.S.,ALLOY STEEL,DUPLEX ,LTCS as per ASME SEC-IX
3. HYDROTEST PACK PREPARATION AS PER K.O.C SPEC.
4. EQUIPMENT ALIGNMENT INSPECTION FOR VARIOUS VESSELS LIKE CHARCOAL FILTER, DESALTER ETC.
5. PQR- DONE for LTCS for SA-516Gr.60 material, Duplex material for arc welding.

• Worked as QA/QC ENGINEER for NEW ATK MEROX ,CLIENT:M/S
TOYO EGINEERING INDIA LTD/KUWAIT NATIONAL PETROLEUM COMPANY.

1. NEW AVIATION TURBO KEROSENE PLANT ERECTION IN KUWAIT NATIONAL PETROLEUM COMPANY, KUWAIT FROM 2006 TO 2007.
2. PIPE LINE INSPECTION FOR CAUSTIC SERVICE.
3. PWHT CHART REVIEWING FOR CAUSTIC SERVICE LINES.
4. QUALITY PLAN, QUALITY PROCEDURES SUBMISSION AS PER KNPC SPEC.
5. WELL KNOWN ABOUT KNPC, KOC –INSPECTION STANDARDS.


 Worked as QA/QC ENGINEER for VACCUM RERUN REVAMP PROJECT in KNPC-KUWAIT
Client: TECHNIP , FROM 2004 to 2005.

 Worked as QA/QC ENGINEER for NEW AFTER COOLER ERECTION in KNPC-KUWAIT
Client:KNPC, FROM 2005 to 2006.

 Worked as a ENGINEER QC TRAINEE ENGINEER IN SPIC , TUTICORIN FROM 2002 TO 2003.


 Also worked as a SHUT-DOWN INSPECTION ENGINEER IN ANNUAL TURN AROUND –2004. IN SPIC FERTILIZER LTD, (CENTRAL WORK SHOP) TUTICORIN-5
 Ammonia Horton Sphere Shutdown Job.
Capacity -3000mt.
Material-carbon steel
U.T. test for all the joints carried out.
F.M.P.I-carried out on surface area

 Naptha Unloading Pipe line Fabrication.
Length-138mtrs,
Prefabrication and mock-fit up carried out

 Ammonia Importation terminal (A.I.T) pipeline Fabrication.
Material – carbon steel
Length – 48mtrs

 Retubing of fixed type Heat exchanger.
Material – carbon steel

 ALF3 – crystalizer ss316-Ti lining job.
After the lining completed passivation coating carried-out between the weld joints.

 Process Air Pre Heater Radiation Coil Renewal.
Material – s.s. - 321

 Primary Reformer inlet and outlet Pigtail renewal.
Material – incolloy - 800h
Reformer tube – H.P. - 40

Bachelor of Engineering in Mechanical

Discipline.(B.E-MECH)
CRESCENT ENGG. COLLEGE.
Madras University, India.
Batch: 1996-2000


CERTIFIED WELDING INSPECTOR – (AWS)

- NDT Level - II

 Radiography Testing.
 Ultrasonic Testing.
 Magnetic particle Testing.
 Dye Penetrant Testing.

MS-WORD,MS-EXCEL

WRITING ABOUT POEMS