CV Lead Diver Lamnalco Sudan Bashair 2 Marine Terminal Port Sudan, Oceaneering International, Subtec ME

Resume built for oil and gas job opportunities by a jobseeker with experience in Lead Diver Lamnalco Sudan Bashair 2 Marine Terminal Port Sudan, Oceaneering International, Subtec ME - would you like to offer this candidate a job/contract employment?

CV/Resume ID no.: 109717
Last Updated: Tuesday, June 1, 2010

I am an honest,hardworking and dependable diver with a vast experienced in the field of commercial diving both offshore and inshore. I am experienced in the maintenance of diving equipments including setting up before diving operations. I am a holder of IMCA Class II Air Diver 50M from PDC,South Africa. ADCI member as Surface supplied Air Diver and a former Phil. Navy Tactical Diver. I am available for work anytime and anyplace.

1. Lead Diver March 2007 now
Lamnalco Sudan
Bashair 2 Marine Terminal, Port Sudan
Lamnalco Group
P.O. BOX 5687 Sharjah, United Arab Emirates

WORK DESCRIPTION:

A.SPM Maintenance:

-Maintenance of SPM/ BASHAYER 2 Marine Terminal Port Sudan Above and Underwater.
-Inspection of Floating Hoses, Mooring Hawsers Maintenance, including pick-up ropes and floats.
-Greasing of main, swivel bearings, and UNI-JOINT.
- Closing/ Opening of 801,802,803, PLEM Valves also maintaining hydraulic press unit or HPU.
-Opening/closing of hose valves #1 and #2 before and after tanker loading operation.
-Opening/closing of chain valves during line flushing after tanker loading operations.
-Lining of SPM for tanker operations, circulation of cargo and line flushing during before and after loading operation.
-Maintenance of solar panel, camera including wash and wipe system, racon and foghorn and batteries.
-Maintain SPM cleanliness inside/outside deck house.
-In charge of pumping cargo oil from surge Tank no.1 and no.2 back to line.
-Maintain water tight doors and hinges.
-Assist PDOC technicians in removal/installation of Surge Relief Valves.
-In charge of opening/closing manholes and ensure safety of enclose space entry.

B. Underwater Maintenance:

- Inspection of under buoy subsea hoses down to buoyancy tank using U/W video.
- Set up all dive equipments before diving operation such as DDC, helmets, set dive panel, underwater video.
- Monitor corrosion potentials readings on SPM anodes.
- Take ultrasonic thickness testing on chains.
- General under buoy inspection.
- Set up diver launch and recovery system.
-Maintenance of (LARS) diver Launch and Recovery System.
- Underwater survey on PDOC Jetty and Install Channel markers for Line Boat SHIHAN.
- Assist dive supervisor running dive.
- Calibration of dive panel gauges and DDC Panel.
-Maintenance of electric diesel HPC, AIR QUADS, GAS QUADS, DDC.
-Ensure divers, equipments readiness before diving.
- Inventory of all dive equipments.

C. Tanker Loading Operation

-In charge of team on board zodiac to prepare mooring hawsers for mooring.
- Conducting SPM pre-berthing inspection.
-In charge of cargo hoses no.1 and no.2 connection to tankers manifold.
-Monitor SPM for flushing/loading and circulation.
-Assist in securing/releasing of tugs towing wire onto tankers AFT.
-In charge of all tools used for connection /disconnection of cargo hoses inside tanker tool basket.


2. Diver, Yemen Project -November 1999 to May 2006
Oceaneering International/ Subtec Middle East
PO BOX 4375, Sharjah, United Arab Emirates

WORK DESCRIPTION:

-Maintenance of FSO Safer, PLEM 1, PLEM 2 (SBM), Cargo Hose handling for tanker operation, pipeline, barge Barash, maintenance of dive equipments.

-Maintenance of FSO Safer: replace/install cathodic protection, cleaning/blanking seachests, locate/clean drain plugs.

-Maintenance of PLEM1: take thickness measurements of anchor chains, clean/photo valves, clean buoyancy tanks and its components, clean sub sea hoses, and monitor V1-V2 actuator valves.

-Maintenance of SBM (PLEM 2): removal/install subsea hoses, remove/install valves, pressure tests of subsea, install sacrificial anodes, take thickness measurements of anchor chains, take configuration of subsea hoses, and clean/scrape marine growth.

-Maintenance of barge Barash: take cathodic potential reading, welding deck plates, railings, patch holes, clean/ scrape marine growth, install fenders, grease valves, remove/install anchor wires.

-Maintenance of channel markers (inner/outer): check wires/anchor blocks areas, removal of marine growth.

-Pipeline inspection: check/inspect field joints, photo located suspended areas, install grout bags on suspended areas.

-Cargo hoses handling for tanker operations.

-Maintenance of dive equipments.


3. Chief diver, Sta. Rita 1000 MW Power Plant Project -June 19, 1998 to July 20, 1999
Mc Connell Dowell Philippines Inc.
Cifra Bldg., Sta. Rita Ilaya, Batangas City

WORK DESCRIPTION:

-Pipe laying for intake and outfall GRP Pipes
-Back filling of Pipes
-Survey
-Underwater cutting and welding of pipes
-Video Inspection
-Seabed preparation for GRP pipe


4. Diving Supervisor, MICT - April 15, 1997 to June 12, 1998
(Manila International Container Terminal)
Seaform Systems Asia Inc
Room 202, Narra Bldg., Pasong Tamo Extension,
Makati City, Metro Manila, Philippines

WORK DESCRIPTION:
-Concrete Jacketing of Piles (MICT)
-Video Inspection


5. Dive Supervisor,
Safety and Security Officer -October 18, 1996-December 20, 1996
Cambodia BR#39 Project for USAID
Seaform Systems Asia Inc.
Room 202, Narra Bldg., Pasong Tamo Extension,
Makati City, Metro Manila, Philippines

WORK DESCRIPTION:
-Moved all UXO’s (Unexploded Ordinances) to safe area.


6. Head Diver -September 3, 1996-October 1996
Cambodia BR#39 Project for (USAID)
Seaform Systems Asia, Inc.
Room 202, Narra Bldg., Pasong Tamo Extension,
Makati City, Metro Manila, Philippines


WORK DESCRIPTION:
-Survey bridge underwater
-Locate and disable mines/UXO’s found underwater.


7. Operations Manager -December 1995-August 1996
ELCJ Diving Services
Brgy. Sambag Jaro, Iloilo City

WORK DESCRIPTION:
-Anchor recovery
-Underwater survey


8. Diver / Warehouseman -May 16, 1993-June 21, 1995
Offshore Petroleum Divers
PO BOX 10868, Manama, Bahrain

WORK DESCRIPTION:

1) Offshore Diver responsibilities include:

a) Pakistan Oil Terminal- On board, DB Hercules
-Installation of grout clamps, grout inspection, taking measurement of gaps between bottom jacket and seabed, diver’s tender, standby diver.
-Install cathodic protection on jacket legs
-Set-up dive equipments
-Maintenance of Diving equipments
-Demobilization of diving equipments
-Assisting of Surveyors

b) Bukha Pipeline-Onboard KP-1
-Installing marker buoys on existing pipelines, stinger checks
-Maintenance of diving equipment

c) Rak gas (SBM) - Onboard Aladin
- SBM removal job as diver, removal of subsea hoses
-Guide anchor chain to seabed
-Mobilization and demobilization of diving equipments

2) Warehouseman responsibilities include:

a) North Yard, main Yard, barges KP-1, Hercules-
-Setting up air dive spread, hydro testing of chambers, hoses, volume tanks
-Pressure testing of panels and chambers
-Installing piping and electrical o air chambers
-Maintenance of LP and HP compressors
-Taking purity testing on HPs and LPs
-Servicing regulators such as tescom, victor, MDE, Ultrathermics, Scuba regulators
-Setting pressure relief valves for LPs, panels DDc’s volume tanks
-Servicing dive hats such as KMB17, KMB18
-Taking inventory of warehouse supplies, spares and equipments
-Set up panels such as decompression chambers (DC) panel, HP panel, dive panel A/MG
-Continuity test of communication cables, marsh marine
-Replacing hose end fitting, reusable and synflex sewage fitting
-Servicing BIBS (built-in breathing system) for DDC
-Replacing/servicing valves (Apollo, Whitey needle valves)
-Welding work
-Charging bailout bottles and quads
-Set-up dive store (North Yard)
-Test and repair dive hoses/deck hoses


9. Diver -October 1987-May 1993
Gulf Diving Services
PO BOX 26321, Manama, Bahrain

WORK DESCRIPTION:

-Underwater survey and inspection
-grouting
-installing copper dams and DC plugs on US Navy Ships
-installation of slick bar and oil booms
-repairing power cables for BSED-
-underwater cutting and welding
-salvage, search and recovery
-ships and barges bottom hull cleaning
-installing cathodic protection
-underwater pipeline inspection and repair
-underwater lifting
-conducting ABSD/Llyods survey on ships or barges
-ships rudder and propeller inspection, cleaning ship’s seachest
-submarine cable laying and surveying-
operation of HP compressor for scuba charging
-operation of LP compressor for surface supplied diving equipments.

b) ASRY Floating Dry Dock Project (Jalal Costain)
-Installation of dolphin fenders and mooring system for floating dry docks.


10. Diver -July 1987-September 1987
Wharton Williams Taylor (ME)
PO BOX , Manama, Bahrain

WORK DESCRIPTION:

a) Job with Marjan Gas Compression Platform/Aramco
-Inspection of legs of platform
-Strapping anode cables
-replacing old anodes from 40 feet to 145 feet
-cleaning legs in preparation for synthoglass wrapping
-Video inspection
-ABS survey on barge Hercules of Brown and Root


11. Diver -May 1987-June 1987
Wharton Williams Taylor
PO BOX, Manama, Bahrain

WORK DESCRIPTION:

a) Job with Juaymah Trestle Phase II/Aramco
-Cleaning piles with hydraulic brush cart
-Coated base of legs with epoxy
-Installing fiberglass jackets
-Back-tilling of seabed
-Torquing locknuts
-Inspection
-Measuring gaps of jackets
-Underwater video.


12. Commercial Diver -September 1986- March 1987
Tech-Dive, Inc.
PO BOX 669, Manama, Bahrain

WORK DESCRIPTION:

-Underwater welding
-Survey and seachest and propeller clearing
-Underwater photography
-Operation of high pressure compressor for scuba charging
-Underwater pipe fitting
-Salvage
-Installation sacrificial anodes
-Underwater inspection
-Repairs and maintenance.


13. Industrial Diver for the Pearl -May 1986-August 1986
Oyster Project for the state of Bahrain
Bahrain Center for Studies and Research
PO BOX 269, Manama Bahrain

WORK DESCRIPTION:
-Pearl Diving for the State of Bahrain


14. Diver/ Welder -November 1982- December 1985
Ballast Nedam Group, N.V.
Manama, Bahrain

WORK DESCRIPTION:

-Underwater airlifting and inspection
-Search and recovery
-Cleaning propeller and seachest
-Underwater coating and maintenance
-Underwater cleaning of structure by HP water jet and / or hydraulic brushes
-Placing bottom protection
-Underwater concreting and grouting
-Underwater survey
-Scraping pile and repairs
-Underwater video inspection
-Operation of high-pressure compressor for scuba charging, deckhand and forklift operator.


15. Police Investigator - September 1982-November 1982
Civil Security Unit
Philippine Ports Authority
South Harbor, Manila, Philippines

WORK DESCRIPTION:
-Port Police investigation


16. Self-employed Oyster Harvester -August 1980- November 1982
Cavite, Philippines

WORK DESCRIPTION:
-Farming and harvesting of saltwater oysters


17. Tactical Diver -April 1976- August 1980
Philippine Navy
Manila, Philippines

WORK DESCRIPTION:

-Military diver, airborne/ parachutist, hydrographic reconnaissance (cartography),
-Operation of high pressure compressor for scuba charging underwater salvage
-Underwater changing of propeller
-Bottom-hull cleaning
-Search and rescue
-Security and lifeguard duties to VIP’s underwater demolition/ blasting
-Radio operator
-Underwater pipe fitting
-Underwater piper inspection

College: International Seminary
Manama, Bahrain
1991- 1992

Secondary: Tirona High School
Kawit, Cavite, Philippines
1970- 1974

Elementary: Medicion Elementary School, Imus
Cavite, Philippines
1964- 1970

TRAINING/ SEMINARS ATTENDED:

• Basic Underwater Operation Course (Class 22)
• Basic Demolitionist Course
• Basic SEAL (Sea, Air, Land) (USN)
• Jungle Environment Survival Training (USN)
• Naval Intelligence Course (Class 18)
• Basic Safety Training ( February 26, 2006 – March 2007)
Personal Safety Techniques
Fire Prevention and Fire Fighting
Elementary First Aid
Personal Safety and Social Responsibility
• Shore Based Fire Fighting (March 08-09, 2007)
• General Tanker Familiarization Course (March 12-13, 2007)
• Oil Spill Response Training by VIKOMA (U.K.) (June 2007)

ADCI MEMBER- Certificate
ID

CERTIFICATE OF COMMERCIAL DIVER TRAINING
PDC DIVER REGISTRATION NUMBER 2009-08-D2451
PROFESSIONAL DIVING CENTRE
20 Bremen Road, Bayhead, Durban Harbour, South Africa

MS Word

Assistant mechanic,plate welder,forklifift operator,radio operator,seaman,aquaculture,fisherman.