CV Electrical and Electronic Engineer Indian CDC O.N.G.C. Mumbai High Offshore North & South Oil & Gas
Electrical and Electronic Engineer Indian CDC O.N.G.C. Mumbai High Offshore North & South Oil & Gas
Resume built for oil and gas job opportunities by a jobseeker with experience in Electrical and Electronic Engineer Indian CDC O.N.G.C. Mumbai High Offshore North & South Oil & Gas - would you like to offer this candidate a job/contract employment?
CV/Resume ID no.:
110460 Last Updated:
Sunday, May 2, 2010
Location (Residence): valliyur, India Citizenship:India
Education & Experience:
Work Authorization & Relocation:
Bachelors in Electrical and Electronics Years of Experience:
Authorized to work in: India Present Location: india, valliyur Relocation: Anywhere (International)
1. Summary (Cover Letter) - CV/Resume Part 1 [Mandatory]
Intend to join leading organizations that show my technical skills, talent and knowledge efficiently. I am looking for an opportunity where I can utilize my experience and my skills in contributing effectively to the success of the organisation in which I am placed and also further improvement of my personal skills towards the development of the organisation.
2. Work Experience - CV/Resume Part 2 [Mandatory]
OFF SHORE EXPERIENCE:
Two YEARS of experience in OIL & GAS FIELD
*. M/s S.S CONSTRUCTIONS
Worked as Electrical Technician in O.N.G.C. Mumbai High Offshore (North & South) Oil & Gas Field from Nov 2008 to Mar 2010.
I have acquired experience of both, the Field Maintenance in Electrical as well as in Turbine Generator Hall and Turbine Generator Control Room.
I am conversant with various Safety Procedures Precautions taken while performing day-to-day Electrical activities including different Permit Procedures.
I am familiar with various maintenance activities such as Preventive, Predictive & Break Down Maintenance Activities, carrying out Routine Inspection of Various Equipments as per schedule, Different Overhaul & Shutdown jobs, Verifying vibration data and temperature of Electrical Equipment Windings, Verifying Parameters of Turbine and Generators.
I have worked on numerous Rotating and Static Equipments in organizations.
A brief description of such equipments is given below.
My duty includes Calibrating the Readings of Electrical Equipments and verifying such as Amperes, Kilowatt, PowerFactor, Temperature, Differeintial Pressure, Vibration, Kilowatthour readings, Running Hours and Rectifying if there is any disorder happens. My job includes observance of Safety rules and safe working practices.
TURBINE AND GENERATOR:
I used to verify and maintain the Turbain Inlet Air Filter Pressure, Turbain Enclosure Temperature and Enclosure Pressure, Generator Inlet Air Filter Pressure and Generator Enclosure Temperature, RunningHours of Turbain Generator, Generating Power in KW, KVAR, and KVA accornding to the load, PowerFactor, Fuel Usage in MMSCRD and Rectify varience occurs. 6.6MW,6.6KV
TURBAIN GENERATOR CONTROL ROOM:
I have worked in SCADA and PLC in TurbainGenerator Control Room and checks the Data as sends by the sensor.
Giving Single Phase and 3 phase supplys to the 125W HPML Lightings and Emergency 165W Lights in Plateform.Three Power Supply to Induction Motors which is used in field using receptacles. Power Supply to welding equipment when works are in progress.
I worked under the switchgears such as CircuitBreaker and Relays. All the Electrical Equipments is protected by the CircuitBrakers and I in the maintainence of the Circuitbraker when it trips the circuit and also maintenence in various types of Relays.
PRODUCTION OF ELECTRICAL ENERGY IN THE PLATFORM:
I worked in the Electrical Energy generating side, where the Electrical Energy is Generated by the TurbineGenerator. I have the keen knowledge about the generation of Electrical Energy in platform.
I worked in HVAC Department, mainteinence and checking the 29A/415V Induction Motor , Blowers and Chiller Handling Unit.Provideing Air Supply to entire Platform.
*. M/s SRI HARI CONSTRUCTIONS PVT Ltd
Worked as Electrical Engineer in the Building management
Erection and Commisioning of CCTV(CLOSED CIRCUIT TELEVISION).
Erection and Commisioning of Public Address.
Erection and Commisioning of Smoke detectors and Access Controls.
Commisioning of BMS(BULIDING MANAGEMENT SYSTEM).
Providing AHU(Air Handling Unit).
Lightning Arrestor and Earth Electrode Marketting.
3. Education & Training - CV/Resume Part 3 [Mandatory]
COURSE YEAR Of PASSING INSTITUTION/PERCENTAGE
X/SSLC 2001 Annai Matriculation hr sec school
XII 2003 Annai Matriculation hr sec school
[ 79% ]
BE(EEE) 2007 Noorul Islam College of Engg
[ 72 %]
B.E in Electrical and Electronics 2007 passed out from NoorulIslam Collage of Engineering, kumaracoil.
COURSES CERTI-NO DATE OF ISSUE PLACE OF ISSUE VALIDITY
EFA EFA/2981 03-NOV-2009 TUTICORIN LIFE
FPFF FPFF/2708 03-NOV-2009 TUTICORIN LIFE
PSSR PSSR/2694 03-NOV-2009 TUTICORIN LIFE
PST PST/2784 03-NOV-2009 TUTICORIN LIFE
HUET HUET/947 21-DEC-2009 MUMBAI LIFE
DOCUMENTS NUMBER DATE OF ISSUE PLACE OF ISSUE VALIDITY
PASSPORT H7912821 03-DEC-2009 MADURAI 02-DEC-2019
INDOS 09SLO651 03-DEC-2009 MUMBAI LIFE
CDC MUM 169714 17-APR-2010 MUMBAI 10yrs
4. Computer Skills - CV/Resume Part 4 [Mandatory]
I have Skills In Computer as MS Word,Excel, Powerpoint, MS Office
5. Other Skills - CV/Resume Part 5 [Optional]
Knowledge in Program Logic Control:
*. Ladder logic programe.
*. Keynes Software.
*. Zen Software from Omron.
*. Allen Bradley PLC.
*. Siemens PLC.
*. GE Fanuc PLC.
*. SCADA FIX Software.
*. HMI worked Online in GEFanuc PLC.
Have Knowledge in Digital Circuits
6. Additional Information - CV/Resume Part 6 [Optional]
Ability to work in a team.
Committed to work in project deadlines and schedules.
Ability to work in any shift timing.
Good Interpersonal skill.