Home  Register  Jobs  CVs  Job Search  Worldwide  Process  Help  Search  Scams  JA  B  C
Oil Offshore Marine Careers in Onshore and Offshore Drilling Energy Industry Oil Offshore Marine: Oil & Gas Jobs & CVs Online recruitment services (job vacancies, resume/cv database search) for Oil Industry, Energy, Offshore, Petroleum, Engineering, Construction, Drilling, Subsea, Marine, Shipbuilding, Shipping, Petrochemical. Have your own FREE account! free cv upload registration on Oil-Offshore-Marine.com recruiter benefits: free job postings and cv search on Oil-Offshore-Marine.com
  Need to find something?
 
 Username:  
 Password:  
Oil Offshore Marine Register
 
  Remember my password?  
 Recruiters - Employers & Agencies
  Advertise / Contact Us
free cv upload for all job seekers, free access to oil and gas jobs
subscribe to oil careers alerts, oil jobs postings, drilling rig jobs, engineering jobs

 

CV Structural Designer work experience ships & offshore structures FPSO & Heavy Lift Vessel Australia

 
Structural Designer work experience ships & offshore structures FPSO & Heavy Lift Vessel Australia

Resume built for oil and gas job opportunities by a jobseeker with experience in Structural Designer work experience ships & offshore structures FPSO & Heavy Lift Vessel Australia - would you like to offer this candidate a job/contract employment?

Please contact us OR search for another relevant oil CV/Resume in our impressive oil industry database

CV/Resume ID no.: 110692

Location (Residence): Cockburn, Australia
Citizenship: Philippines
 
Languages:
  Native: English Philippines
  Other: English
 
Education & Experience: Work Authorization & Relocation:
Education:
  Bachelors in Civil Engineering

Years of Experience: 12 years
Authorized to work in:
   Australia, Philippines, Singapore
Present Location:
   Australia, Perth
Relocation:
   Singapore, Philippines, Australia
 
Expertise
Category Subcategory Ability Experience
Design/Software Structural Basic 19 years
Other Draughting Basic 9 years
Design/Software Tribon AVEVA Basic 19 years
Design/Software STAAD Basic 12 years
Design/Software ShipConstructor Basic 9 years
Engineering STAAD Basic 12 years
 
CV/Resume Details
 
1. Summary (Cover Letter) - CV/Resume Part 1 [Mandatory]

Dear Sir/Madam,

I have read with interest from your website and I am looking for potential job vacancies.

I am a self-motivated Civil Engineer with a Bachelor of Science in Civil Engineering degree from Philippines and have passed the Civil Engineering professional licensure examination ,top no.12, in my country. I have a good scholastic records.I am seeking to further develop my skills and to apply my knowledge and background to an engineering team.

I have been involved in Structural Designing for ships & offshore structures (FPSO & Heavy Lift Vessel) in most of my employment. Currently, I am a Structural Draftsman of Austal Ships, Western Australia doing structural detailing & 3d modeling of ship structures using AutoCad & Shipconstructor software. I am also knowledgeable to other designing software as can be seen to my resume.

A summary of my employment experience and education is as follows:

-Austal Ships Pty, Ltd, Henderson, Western Australia
Structural Draftsman & 3D Modeller , June 2008 -Present

-Prosafe Production Pte, Ltd, Singapore
Structural Designer, August 2006 – May 2008

-Sembawang Shipyard Pte, Ltd, Singapore
Structural Draftsman, April 2006 – July 2007

-Tsuneishi Technical Services (Phil) Inc., Philippines & Japan
Design Engineer III , April 1997 – March 2006

Bachelor of Science in Civil Engineering
Cebu Institute of Technology, Cebu City, Philippines

Please refer to my resume for further review and evaluation of my qualification.

2. Work Experience - CV/Resume Part 2 [Mandatory]

AUSTAL SHIPS PTY. LTD, WESTERN AUSTRALIA
Position Title : Structural Draftsman
Specialization : Structural Design - Aluminum Ship Structures , Outfittings
& Foundation Seats
Industry : Design & Construction of customized aluminum commercial & defence vessels
Duration : June 2008 – Present
Nature of Business : World leading manufacturer of aluminum vessels. Products include High Speed
passenger and vehicle ferries, High Speed patrol boats, and Combat ships

DUTIES AND RESPONSIBILITIES :

Structural detailing and 3D modelling of ship structure of various parts from stern up to the forward part of the vessel including the superstructure ,foundation seats and outfittings. Softwares used are Ship Contstructor, Autocad, and MS office.
Actual survey and inspection of vessels.

JOB SCOPE :

Structural Detailing of the following construction using Autocad 2008 in 3D environment
- Engine rooms
- Tanks
- Hulls (includes Monohull, Catamaran, & Trimaran)
- Main decks, Mezzanine decks, Superstructure decks
- Connection details (Welded or bolted)

3D modelling using Ship Constructor software
- Creating 3D model of various construction
- Creating LISP programs to enhance modelling
- Build strategy definition and Workpack creation
- Supply the following data for production
- Nested parts
- Profile cuts information
- Generate reports as a fabrication guide


PROSAFE PRODUCTION SERVICES PTE, LTD , SINGAPORE
Position Title : Structural Designer
Specialization : Structural Design - Offshore Structures , Ship Structures , Outfittings
& Foundation Seats
Industry : Major owner & operator of Floating Production, Storage & Offloading (FPSO) vessels
Duration : August 2007 – May 2008
Nature of Business : Involves turnkey engineering, procurement and project management services to
convert oil tankers into FPSO vessels for supply to client on lease charter or
purchase basis.

DUTIES AND RESPONSIBILITIES :

Structural Design of support stools for various FPSO topside modules , skid & foundation seats of equipments, stress calculation for outfitting supports and reinforcements, involves detail engineering of ship structures conforming to international safety standards and rules. Softwares used – Autocad 2007, and MS Office.

Conduct on-board inspection and site survey on FPSO vessels both topside and ship structures.

JOB SCOPE :

Structural design of support stools to the following modules
- Power injection module
- Water injection modules
- Dehydration modules
- and other topside modules
Structural design of topside skids
- knockout drum skid
- Gas compressor skid
- Water treatment skid
Foundation seats of winches and other small equipments
Escape routes as per SOLAS regulation
Detail design of ship structure reinforcing equipment foundations


SEMBAWANG SHIPYARD PTE, LTD. , SINGAPORE
Position Title : Ship Structure Detail Engineering Designer
Specialization : Detailed Design - Ship Structures , Outfittings & Foundation Seats
Industry : Offshore & Marine
Duration : April 2006 – Present
Nature of Business : Engage in FPSO Conversion, New Build Pipe Laying Vessel , and Ship Repair

DUTIES AND RESPONSIBILITIES :

Prepare Detailed Design drawings of various ship construction , foundation seats, stress calculation for outfitting supports and reinforcements, outfitting designs conforming to international standards and rules , including material take-off. Softwares used – Autocad 2007, TRIBON, and MS Office .

Conduct on-board inspection and checking of various ship constructions , foundation seats , and otfittings.

JOB SCOPE :

Detail Design of Mooring Winch Foundation Seat
Detail Design of Windlass Foundation Seat
Boat Davit supports and reinforcements
Mooring Fittings supports and reinforcements
Design of Small Hatches
Hawse pipe and Anchor stowage design and detailing
Helideck Construction Details
Doors and Windows scheduling according to Escape Routing and Fire Integrity
Detail Design of various ship Outfitting Parts
Detail Design of various Constructions of Ship Construction from Aft Construction to Fore Construction
Freeboard Plan
Making Repair Plans


TSUNEISHI TECHNICAL SERVICES (PHILS.), INC. ,PHILIPPINES & JAPAN
Position Title : DESIGN ENGINEER III
Specialization : Ship Structure , Foundation Seat , Mould Lofting
Industry : Shipbuilding
Duration : April 1997 – April 2006
Nature of Business : Engage in Shipbuilding Design (parent company; Tsuneishi Corp.,Japan)

DUTIES AND RESPONSIBILITIES :

Assigned Senior Design Engineer of designing ships using AutoCAD and 3D-Mitsubishi Adavance Technology Engineering of Ships software in conformance to International Standards and Rules. And provide assistance or technical support to field engineers and owner representative/surveyor queries and comments.
Have worked both in Philippines and Japan
Prepare Detailed Design drawings of various ship construction , foundation seat , stress calculation for outfitting supports and reinforcements designs conforming to international standards.
Conduct on board inspection and checking of various ship constructions , foundation seats , and outfittings.
Conduct Sea Trial, Deadweight Measurement, and Inclining Test to Newly Built Ships and Conversion Ships.

JOB SCOPE :
I. Ship Construction Detailed Design–(Bulk Carrier,Car Carrier, Tanker, Chip Carrier, etc.)
Preparation of detailed drawings to the following constructions;
- Aft Construction
- Engine Room Construction
- Deck Construction
- Double Bottom Construction
- Cargo Hold Construction
- Car Decks Construction of Car Carrier
- Hatch Coaming Construction
- Fore Construction
- Manhole Arrangement
- Conversion of Car Carriers
- Making Repair Plans

II. Accommodation Construction Detailed Design
Preparation of detailed drawings to the following constructions;
- Boat Deck Construction up to Compass Deck Construction
- Funnel Construction

III. Foundation Seat Construction
Preparation of foundation seats to the following equipments;
- Windlass
- Mooring Winch
- Steering Gear
- Main Engine Generator
- Boiler
- Main Air Compressor
- Intermediate Shaft Bearing

IV. Mould Lofting (Production Design jobs)
Preparation of data used for production using 3D Mitsubishi Advanced Total Engineering of Ships software ;
- Mould Lofting of pieces using 3D MATES
- Preparing a Cutting Lists of Angle Bars , Built-up, Flat Bar, Bulb Plate, etc.
- Preparation of Numeric Data for Cutting of plates

V. Other jobs
- Member Sea Trial and Deadweight Measurement Team
- Inclining Test
- Member, Information System Group
- Simple structural beam stresses calculation


VICTORIAS MILLING COMPANY , INC. ,PHILIPPINES
Position Title : CADET ENGINEER
Industry : Diversified milling company, Construction Department
Duration : Sep 1996 – Mar 1997
Nature of Business : Engage in Infrastructure Construction

DUTIES AND RESPONSIBILITIES :

Civil works estimate and design, using Microsoft Office , Autocad, and Stress Analysis softwares as a design tools

Conduct site inspection and investigation concerning design and implemtation

Prepares estimates for project bidding requirements


3. Education & Training - CV/Resume Part 3 [Mandatory]

Professional License (Passed National Licensure Board Examination)
Field of Study : Engineering (Civil)
Institute/University : Cebu Institute of Technology, Cebu City, Philippines
Graduation Date : October , 1995


Certification
Passed Civil Engineering Board Examination, May 1996, conducted by Professional Regulation Commission , Republic of the Philippines
12th Placer Civil Engineering Board Examination, May 1996, conducted by Professional Regulation Commission , Republic of the Philippines

Certificate of Completion , Autocad 2002 (3D Module) of Autodesk, January 23 - February 23, 2006, University of San Carlos, Cebu City, Philippines
Certificate Japanese-Language Proficiency Test Level 4, test given December 2005, Cebu City, Philippines, Administered by the Japan Foundation and the Japan Educational Exchanges and Services
Certificate of Attendance to Personality Awareness and Human Relations Seminars, Cebu City, Philippines, April 16, 2000
Certificate of Attendance to Technical Symposium, conducted by Philippine Institute of Civil Engineers, Bacolod City, Philippines, February 22, 1997
Certificate of Attendance to Micro-tunelling, Pre-stressing, Equipment Selection, Environmental Management, Foundation and Deep Basements construction, conducted by Philippine Institute of Civil Engineers, Cebu City, Philippines, July 12-13, 1996
Certificate of proficiency, Computer Aided Structural Anlysis and Design, Quality Computer System, Inc., Cebu City, Philippines, March 6-27,1995


4. Computer Skills - CV/Resume Part 4 [Mandatory]
Knowledgeable in 3D Autocad
Knowledgeable in TRIBON software
Knowledgeable in Autolisp programming , used in Autocad
Knowledgeable in 3D Mitsubishi Advance Technology Engineering of Ships
Knowledgeable in Ship Constructor
5. Other Skills - CV/Resume Part 5 [Optional]
Knowledgeable in basic Structural Stress Calculation, Good analytical skill
6. Additional Information - CV/Resume Part 6 [Optional]
Good team player, can finish the job within the schedule, willing to work overtime


 

Questions about this candidate? Contact us for an immediate answer. To find similar people [or more experienced] - active jobseekers, please login OR create, FREE of charge, your own company account.

In order to view this candidate's contact information, you must a) be registered with Oil Offshore Marine - Worldwide Oil & Gas Jobs, and b) have already purchased a subscription.

Login Register Pricing Information
Structural Designer work experience ships & offshore structures FPSO & Heavy Lift Vessel Australia
CV/Resume ID no.: 110692

Relevant CVs; view more oil and gas CVs
1. Piping Designer working with Compelmada International, s.a. Portugal
2. Tekla X-Steel, Autocad, Microstation - CAD Designer for Structural
3. PDMS & PDS Designer - Structural
4. Civil geotechnical engineer, young I aim to be involved in new challenging projects.
5. Lead Structural PDMS Designer
6. Designing, Planning, Estimation
7. PDMS, PDS, Designer
8. civil engineer
9. STEEL STRUCTURAL DESIGNER
10. Senior Naval Architect/ Structural Engineer
11. Experienced Structural Engineer and more than four years as Strucad Designer
12. Principle Piping Designer, Piping Design Lead, Bentley Rebis
13. Civil Structural Engineer STAAD
14. structural engineer - offshore, off-shore, structural, civil, design
15. Experienced (7 years +) in civil/structural, enthuasiast to switch to offshore line.
16. STRUCTURAL ENGINEER, DESIGN AND SHOPDRAWING OF STEEL STRUCTURE
17. Steel Detailer; site manager, engineer
18. Naval architect at shipyard, 2.5 years experience, outfitting, stability, structural strength check
19. Secretary/Technicall Clerk, having 11 years +, good command over english, excellent technical and in
20. Structural Engineer with 5 yrs of Exp.
 
 
Other CVs; view more oil and gas CVs
1. E&I Technician
2. Adminstration Assistant
3. PDS Piping Designer
4. Chef, catering, administration, security
5. Marine Electrical Officer, Engineer Of Maritime Energetics And Electronics
6. Instrument Technician
7. Senior Health Safety and Environmental Manager
8. Piping Draughtsman
9. Welding Engineer / AWS-CWI Welding inspector
10. ROV Technician ET, Oceaneering Inc, USA
11. Quality Control Inspector, Welding Inspector
12. MECHANICAL QA QC ENGINEER
13. Field operator for oil refinery
14. Geophysicist (Seismic Data Processor), ProMax 2D, SeisUp/SPA, HR GLI3D/Renegade, Refraction Static
15. Master / Captain / First Officer
16. Piping design engineer, BLACK CAT ENGINEERING & CONSTRUCTION WLL – Doha, Qatar
17. Assistant Commissioning Editor at Pearson Education, Chennai
18. Production / Process Technician, Tata Honeywell TDC, DCS, Rosemount
19. Trainee electrical engineer basic experience
20. HSE Officer Oil & Gas Construction Al-Ghurair ARABIAN FOUNDATION Engineering LLC Dubai, UAE
21. Piping Designer, AutoCAD, Pipe Net, MS-Office Seeking Assignments in Design Engineering
22. Electrician / fitter, worked at sab for 4 years, millwright trade certificate
23. Paramedic ACLS Advanced Cardiac Life Support, Sea Survival, HUET, and related HSE trainings
24. Senior QA/QC Engineer UHDE GmbH ThyssenKrupp Toyota Tsushu Corporation TPSC/TTC Alexandria Egypt
25. Radio Operator / Heliadmin Pride NorthSea, locations including UK Venezuela Angola Nigeria Norway
26. Sales Coordinator Golden Tulip Hotel Manama Bahrain Mercure Grand Golden Hotel Jeddah UAE
27. Trainee Autocad Draftsman 2 years work experience in India
28. Oil & Gas and Petrochemical HSE Supervisor Chicago Bridge & Iron, Ruwais United Arab Emirates UAE
29. Piping Construction Engineer Sidi Krir power station 750 MW combined cycle Sharm Al-Sheikh Egypt
30. Ships Officer North Sea experience in Norway Haugesund offshore onbopard crude oil tankers
 
 

Press Ctrl+D to Bookmark - Tell a Friend - Job Archives - Jobs - Oil and Gas CVs Resumes - Subscribe to Job Alerts - Site Map - Events - Legal - Privacy - Contact

oil offshore marine's website design

Official Blog - International Maritime Signal Flags - Glossary of Oil & Gas Jobs Definitions - Abbreviations & Acronyms from the Oil, Offshore, Marine, and Shipping Industries - Engineering Oil Jobs - Top 100 Energy Sites - Marine Jobs - Offshore Jobs - Oil Careers - Maritime Jobs - PDS/PDMS Oil & Gas Jobs - Oil Industry Jobs - Oil Field Jobs - Oil and Gas Careers - Petroleum Jobs - Oil Rig Jobs - Offshore Oil Rig Jobs - Drilling Jobs - Oil Industry - Official Sitemap - Jobs Feed - Login to your Oil-Offshore-Marine.com account

www.Oil-Offshore-Marine.com - Your Oil & Gas, Offshore, Construction, Shipping, Petrochemical, and Marine Engineering Recruitment Center.

© Oil Offshore Marine - Oil & Gas Jobs - All Rights Reserved.
This website is designed for international users, and its use is governed by Oil Offshore Marine - Oil & Gas Jobs Legal provisions. By browsing on any page of this website, you are deemed to have accepted all Oil Offshore Marine - Worldwide Center of Oil & Gas Jobs legal terms. If you do not agree with Oil Offshore Marine's legal provisions, you must stop using this website and its services.


find oil and gas jobs

  Looking for something?