CV 12 years experience in the oil and gas industry in inspection

Resume built for oil and gas job opportunities by a jobseeker with experience in 12 years experience in the oil and gas industry in inspection - would you like to offer this candidate a job/contract employment?

CV/Resume ID no.: 112094
Last Updated: Monday, June 21, 2010

LANGUAGE KNOWN : ENGLISH ,HINDI,MARATHI
NATIONALITY : INDIAN

1] INSPECTION

A] CHECK THE ITEM AS PER GIVEN DRAWING AND API SPECIFICATION.
B] CHECK THE BOUGHT OUT ITEM S SUCH AS STUD NUT 'O' RING SEALS ETC. AS PER STANDERED REQUIRMENT.
C] HANDLE ALL SPEC. PURPOSE INSTRUMENT SUCH AS PRIFILE PROJECTOR, DIGITAL HEIGHT MASTER, MRP GAUGES, BALL VERNIER ETC.
D] CHECK WALL THICKNESS OF ITEMS WITH DIGITAL WALL THICKNESS METER.
E] CHECK MATIREAL HARDNESS IN HRC, HRB, BHN.
F] ATTENDING THIRD PART INSPECTION AGENCY FOR THE CUSTOMER P.O. AND MAKE ALL RELIVANT DOCUMENTS.

2] CALIBRATION

A] CALIBRATE THE VERNIER CALIPER, DIAL VERNIER CALIPER, BALL VERNIER WITH THE HELP OF SATNDERED CALIBRATED SLIP GAUGE, AND MASTER RING GAUGE AT LEAST 75 NOS EVERY SIX MONTH.
B] CALIBRATE THE INSIDE AND OUTSIDE MICROMETER, THREAD HEIGHT GAUGE, LEAD GAUGE, DIAL INDICATOR, ETC. AT LEAST 65NOS. EVERY SIX MONTH
C] CALIBRATE THE HARDNESS TESTING MACHINE WITH THE STANDERED CERTIFIED HARDNESS BLOCK ,5NOS. EVERY THREE MONTH.
D] CALIBRATE THE PRESSURE GAUGE UPTO 30000 PSI FROM OUTSOURES EVERY THREE MONTH AS PER API 6A REQUIRMENTS AND KEEP THE PROPER RECORD.
E] CALIBRATE THE TENSILE TESTING MACHINE ( UT - 20 ) AND IMPAC TESTING MACHINE ( IT - 30 ) FROM OUT SOURES EVERY YEAR AND KEEP THE PROPER RECORD.
F] CALIBATE THE SETTING STANDERED ROD FOR MRP GAUGES INHOUSE ON DIGITAL HEIGHT MASTER AT LEAST 45 NOS. EVERY YEAR.

3] TESTING

A] TENSILE TEST ON UT - 20 MACHINE WITH COMPUTER ATTACHED AS PER ASTM STANDERED FOR API 6A, API 5CT AND CUSTOMER REQUIRMENT.
B] IMPACT TEST ON IT - 30 MACHINE UPTO - 73 DEGREE CEL. AS PER ASTM FOR API 6A, API 5CT AND CUSTOMER REQUIRMENT.
C] MONITOR THE UT AND MPI ACTIVITY FROM THE OUTSOURSE VENDOR AND KEEP PROPER RECORD.
D] CHECK THE CAMICAL COMPOSITION OF RAW MATERIAL FROM OUTSOURSE AND KEEP PROPER RECORD.

4] AUDIT

A] CERTIFIED INTRENAL AUDITOR COURSE SUCCESSFULLY COMPLETED.
B] AS INTERNAL AUDITOR AUDIT EVERY DEPT. AND NOTE THE POSITIVE , IMPROVMENT, NCR POINTS.
C] CLOSE THE NCR WITHIN TIME FRAME.
D] FILL UP THE CORRECTIVE AND PREVENTIVE ACTION.
E] ATTEND THE EXTERNAL AUDIT FOR Q.C. DEPT.( API AND ISO )
F] ATTEND THE CLIENT AUDIT FOR Q.C.DEPT. ( SCHLUMBERGER, BG, BAKER OIL TOOL, WEATHERFORD )


5] DOCUMENT CONTROLLER

A] MAKE TEST DOCUMENT AS PER P.O. AND CUSTOMER REUIREMENT AND API OR OTHER STANDERED.
B] KEEP PROPER RECORD OF ALL TEST DOCUMENTS, NCR, REJECTION REPORT, CALIBRATION REPORT,CALIBRATION OF TENSILE M/C, IMPACT M/C, PRESSURE GAUGE, ETC.
C] KEEP ALL CLOSE FILE PROPERLY GIVEN NUMBER AND TRACK THEM.
D] HANDLE THE RECORD STORE.
E] CHECK THE DOCUMENTS WITH THE SPEC. REQUIREDMENT, P.O.SPEC., STANDEREDS, VERIFY AND FIND OUT THE LOOP HOLE AND COMPLETE THE LOOP BY PORPER CHANEL.
F] KEEP RECOD RETRIABLE AND READABLE.


6] VENDOR VISIT

A] TO DEVELOP THE VENDOR FOR THE PRODUCT SUCH AS GATE VALVE, COUPLING , BOP, ETC.
B] CHECK THE FACILITY AVABLE AT HTE VENDOR END AS PRE OUR REQUIREMENTS.
C] INSPESCTION THE ITEM WITH GIVEN P.O. AND DRAWING.
D] TIME TO TIME VISIT TO VENDOR END AND KEEP THE RECORD.

COLLEGE

COMPUTER SKILL

MS - CIT
FAMILIAR WORKS IN COMPUTER

OTHERS

SUCCESSFULLY COMPLETED THE INTERNAL AUDITOR COURSE ( ISO 9001 : 2000 )
SUCCESSFULLY COMPLETED THE FIRST AID TRAINING PROGRAMME THROUGH ST. JOHN AMBULANCE ASSOCIATION