CV QC Engineer Boiler Engineer Metallurgy Mining & Petroleum Engineering Alazher University Cairo Egypt

Resume built for oil and gas job opportunities by a jobseeker with experience in QC Engineer Boiler Engineer Metallurgy Mining & Petroleum Engineering Alazher University Cairo Egypt - would you like to offer this candidate a job/contract employment?

CV/Resume ID no.: 112184

Objective:

My Objective is to get a challenging position in a multinational company working in the gas plant, gas compressor station, LNG industry, onshore and offshore pipe lay, platform maintenance, cement, refinery, chemical, petrochemical construction, and power (thermal, gas ,solar &nuclear plant ) projects that suits my specialization, qualification and experience.


Summary of Experiences

§ Review contract specification and design drawing.
§ Implementation and follow up of project quality specification and plan.
§ Study technical specification and code required for new project.
§ Prepare inspection and test plan (ITP) procedure for all activities.
§ Prepare primary welding procedure specification (PWPSs) &PWHT procedure.
§ Prepare survey procedure, steel structure fabrication & erection procedure.
§ Prepare piping fabrication and erection, grouting, sand blasting & painting, mechanical cleaning, flushing, pressure test package, insulation& steam blow procedure.
§ Prepare mechanical equipment installation procedure.
§ Preparation & verification of material certification & traceability.
§ Running and testing of welding procedure qualification (PQR) and qualification test (WQT) in arrange of materials and welding process.
§ Training session to welders regarding weld repair, causes and appreciation of the factors influencing the formation of weld defects and remedial action to prevent it and closing NCR’s on technical matter related to welding.
§ Check and following welding activities with respect to fit-up, weld geometry, preheating, filler metal, fluxes, inserts& welding machine.
§ Evaluation of NDE (PT-MT-UT-RT) material and welding as per relevant acceptance criteria of code, standards and specification.
§ Ensuring the correct NDE and PWHT methods was used for various piping materials and weld configuration.
§ Familiar with codes and standards such as (API 1104, ASME SEC-I, II, V, IX, B31.1, AWS D1.1).
§ Punching listing lines (welding & piping) and making sure all relevant documentation was correct, also isometric drawing against P&ID’S.
§ Prepare and witnessing Hydro/Pneumatic testing then overseeing the final reinstatement prior to commissioning.
§ Review working documents and preparing final project dossier then handling to the client.

Professional Experience:

PROJECT CAIRO WEST POWER STATION (750 MW THERMAL PLANT).
DURATON FROM 862009 TILL PRESENT.
CLIENT BABCKO HITACHI (SUMITOMO).
EMPLOYER MISR COMPANY FOR MECHANICAL AND ELECTRICAL PROJECTS (KAHROMIKA).
POSITION QA/QC & BOILER ENGINEER.
DUTIES:
§ Review all application drawing by comparing design drawing with workshop &site drawing.
§ Prepare inspection and test plan (ITP) procedure for all activities.
§ Familiar with codes and standards as (API 1104, ASME SEC-I, II, V, IX, B31.1, AWS D1.1).
§ Check purchase order (quantity, type& size) of materials and electrode and record of batch no to
ensure that metal and filler materials are properly specification.
§ material receiving with material control &reviewing material receiving inspection
report(MRIR)according to material certificate& purchase order.
§ Prepare survey procedure, steel structure fabrication & erection procedure.
§ Prepare piping fabrication and erection, grouting, sand plasting&painting, mechanical cleaning,
flushing pressure test package, insulation steam blow procedure.
§ Prepare leveling, alignment, erection& tighten &steel structure procedure.
§ Check height of sole plate and anchor bolts.
§ Prepare mechanical equipment installation procedure.
§ Check boiler column base plate alignment and leveling.
§ Check column verticality, bolt tightening of boiler steel structure.
§ Check leveling and location of tanks, vessels and other equipment.
§ Check and following welding activities with respect to dimensions, weld geometry, fit-up,WPS,
welders ID, preheating, Filler metal , main and potable electrode ovens , required purging,
consumable, fluxes, inserts& welding machine.
§ Check PWHT machine calibration certificate, monitoring chart, cables connection and verify that
(PWHT) has been done satisfactory.
§ Prepare the NDE, PWHT&Hardness test request then identify weld joint with isometric and marking
for NDT, PWHT&Hardness test.
§ Verify that additional of NDT has been performed if required
§ Reviewing all NDT & PWHT reports and witnessing all other associated test
§ Evaluation and approval of NDE (RT, MT, PT and PAMI) materials and welding in according to
codes, standers and specification.
§ Punch listing lines (welding & mechanical),also cross checking as built isometric drawings against
The P& ID’s.
§ Prepare test package (as built drawing punch list, NDE reports, welding summary and calibration
equipment reports).
§ Witness for pressure leak test process then overseeing the final instatement prior to commissioning.
§ Review working documents and preparing final project dossier then handling to the client.


PROJECT EL ATF POWER STATION (750 MW COMBINED CYCLE).
DURATON FROM 5/6/2008 TO 30/5/2009.
CLIENT TOSHIBA(TISUSSUE).
EMPLOYER MISR COMPANY FOR MECHANICAL AND ELECTRICAL PROJECTS (KAHROMIKA).
POSITION QA/QC &PIPING ENGINEER.
DUTIES:
§ Review all application drawing by comparing design drawing with workshop &site drawing.
§ Prepare inspection and test plan (ITP) procedure for all activities.
§ Familiar with codes and standards as (API 1104, ASME SEC-I, II, V, IX, B31.1, AWS D1.1).
§ Preparation & verification of material certification & traceability.
§ Material receiving, storage and traceability with material man and doing material receiving
Inspection report (MRIR) according to material certificate and purchase order.
§ Check quantity, type, size, heat no and collar code of materials and electrode.
§ Prepare piping fabrication and erection, grouting, sand pasting &painting, mechanical cleaning,
Flushing pressure test package, insulation &steam blow procedure.
§ Prepare procedure for survey and mechanical equipment installation.
§ Check dimensions (before and after welding)and fit up of the joint before starting welding operation
as per the details drawing (root opening, bevel angle and surface mismatch).
§ Check WPS, welders ID, required preheat, main and potable electrode ovens, and required purging,
Consumable and welding machines.
§ Check PWHT machine calibration certificate, monitoring chart, cables connection and verify that
(PWHT) has been done satisfactory.
§ Prepare NDE, PWHT & hardness test request then identify weld joint with isometric and
Marking for NDE, PWHT& hardness test.
§ Interpretation and approval of NDE material and welding as per relevant acceptance criteria of code,
Standards and specification.
§ Ensuring the correct NDE&PWHT methods was used for various piping materials and weld
Configuration.
§ Following up accept and reject welding by NDE to evaluate welders performance.
§ Check level, axis and alignment for mechanical equipment installation.
§ Punch listing lines and prepare test package.
§ Witness pressure test for all installation system and handling to the client.


PROJECT KAHROMIKA WELDING SCHOOL FOR WELDERS TRAINING &
QUALIFICATION.
DURATON FROM 5/1/2008 TO 30/5/2008).
CLIENT KAHROMIKA CLIENTS OF POWER STATION PROJECTS.
EMPLOYER MISR COMPANY FOR MECHANICAL AND ELECTRICAL PROJECTS. (KAHROMIKA).
POSITION WELDING ENGINEER.
DUTIES:
§ Prepare primary welding procedure specification (PWPS) &PWHT procedure.
§ Prepare and running welding procedure qualification record (PQR) and welders qualification test
(WQT) in arrange of materials and welding process according to AWS and ASME codes.
§ Session to welders about properties and weldability of ferrous and non ferrous materials included
Welding, brazing and cutting processes.
§ Taking class for welders about sources, types, seams, disadvantages, monitoring, controlling of
Welding defects and how can be avoided and repaired.
§ Training session to welders regarding weld repair, causes and appreciation of the factors influencing
the formation of weld defects and remedial action to prevent it and closing (NCR’s) on technical
Matter related to welding.
§ Non destructive test (NDT) method session included PT&MT practice training.


PROJECT KAHROMIKA HEAD OFFICE.
DURATON FROM 1/8/2007 TO 30/12/2008).
EMPLOYER MISR COMPANY FOR MECHANICAL & ELECTRICAL PROJECTS (KAHROMIKA).
POSITION QUALITY ASSURANCE ASSISTANT.
DUTIES:
Review new contract specification and design drawing.
Implementation and follow up of project quality specification and plan.
Study technical specification and code required for new project.
Assist in the documents of QA/QC manual and plan.
QA/QC documentation internal auditor relative to ISO standard.
Study technical specification & code requirements of new projects.
Review calibration of QC and construction tools.
Coordinate between head office quality & site quality members.
Review quality plan during the construction.
Evaluation, following & ensuring subcontractor follows the relevant procedures and contract
Specification.

Academic Education:

2003-2007 Bachelor of Metallurgy, Mining & Petroleum Engineering, Metallurgy & Materials Department, Alazher University Cairo.
Graduation Degree : Very Good.
Under graduation project : El –WAHAT EL-BAHRIA IORN MINING SURVAY (Excellent).
Graduation project : Fusel Resources &Technology in Egypt (Very Good)

Certification & Training:

§ My plan is to get qualification and certification CSWIP3.1 during New Year (2010).
§ ASNT NDT Level-II (RT, MT, PT &UT) with guides of recommended practice no (SNT-TC-1A).
§ Applied Welding Technology & visual inspection course.
§ Key to piping and Plant layout course.
§ Radiation protection course.

Computer knowledge in M.S office package

§ Language: Arabic: mother tongue, English: good speaking, reading and writing.
§ Zedny center attendance certificate of (time management, planning, mind mapping, communication
Skills and leadership) course.