CV Senior Chemical Process Engineer working for Oil and Gas Development Company Pakistan OGDCL

Resume built for oil and gas job opportunities by a jobseeker with experience in Senior Chemical Process Engineer working for Oil and Gas Development Company Pakistan OGDCL - would you like to offer this candidate a job/contract employment?

CV/Resume ID no.: 112527
Last Updated: Wednesday, June 30, 2010

Dear Sir,

I am working from the last 12 years in oil and gas development company Pakistan (ogdcl) which is running under strict government rules and regulations and with full confidentiality.


Experience in Oil and Gas Sector = 12 years

1. Registered member of Pakistan engineering council of Pakistan
I have also mentioned my job responsibilities in detail in my CV I once again want to tell you that job description which you have written i completely fulfill all these activities rather more than this because i have additional knowledge also regarding oil and gas process because i have also specialized in the field of petroleum and gas technology and have (12 years) on hand working experience in controlling all these activities which u have mentioned in your job description because now i am running independently full fledge plant and I am the in charge of the plant.

I once again want to tell you about my job description in details:

1. Carry out a variety of duties to maintain the efficient and safe operation of various terminal facilities to ensure receipt, storage and export of products

2. Carries-out daily inspection of plant and equipment in oil/gas stations, tank and flare areas and/or water injection units to ensure normal operations, as applicable. Takes a variety of readings such as rates, levels and pressures, flow, line loads, running condition of surface pumps, Redas and enters in daily log book.

3. Checks for any malfunctions, such as line ruptures, valve breaks and blown gaskets, estimates degree of seriousness and takes action accordingly. Includes isolating and shutting down individual plant. Operates/Checks valves, lines and pumps/ compressors to meet operating requirements. Includes starting up and stabilizing degassing station, water injection units, main oil line pumps manifolds, flow/transfer lines, as appropriate.

4. Participates in all maintenance and inspection activities. Prepares equipment for required job and place back on line upon completion. Includes de pressurizing/pressurizing, purging, isolating and releasing/ receiving wellhead equipment, transfer lines, trunk line flow lines, etc.Participates in pre-commissioning/commissioning of new wells and facilities.

5. Checks and monitors gas levels at various areas in the plant during maintenance activities. Attends maintenance work to ensure safe operations consistent with related Permit/ Certificate. Starts stops and monitors chemical injection in central station, remote stations and water injection units. Maintains records of chemical injection rats.

6. Re-charges chemical storage tanks. Keeps chemical stock and arranges for loading/ unloading of chemical. Understands the Company Health, Safety and Environment Policy, and how it relates to his job. Performs his work in a safe and efficient manner, and is familiar with relevant safe working procedures and practices that relate to his job.

Professional Experience TOTAL EXPERIENCE: 10 YEARS on hand Strong Experience in OIL AND GAS PROCESSING PLANT (OIL AND GAS DEVELOPMENT COMPANY LIMITED) PAKISTAN. (OGDCL)


Patents and publications • Three Years DIPLOMA IN COMPUTER SCIENCES with first division. And also topped in the ITG Pakistan (A Recognized Institution of Computer Science World Wide) including AUTOCAD SOFTWARE APPLICATION.

Additional professional activities Attended Plant operation training course for 18 month organized by CLOUGH
ENGINEERING GROUP OF AUSTRALIA AT DHODAK PLANT (GAS CONDENSATE PROCESSING PLANT), which include the following topics

Process, TEL, Safety, First Aid, Fire Fighting/ Fire Drills, ESD& OSD logics, LPG, LPG Hazards, Emergency Plan, Pumps, Compressors, Distillation, Stabilization, Dehydration,
Fractionation, Liquid Recovery, LPG Handling, Cause & Effect Table, Products Loading, and Plant Commissioning, Computer Course.


CURRENT POSITION:

CURRENTLY I AM WORKING AS SENIOR PROCESS ENGINEER / INCHARGE PLANT / SENIOR CHEMICAL ENGINEER AT CHANDA OIL AND GAS PROCESSING PLANT WHICH INCLUDES NATURAL GAS DEHYDRATION LIQUIFIED NATURAL GAS, DE-PROPANIZER, LIQUIFIED PETROLEUM GAS AND STABILIZATION AND PROCESSING OF CONDENSATE AND CRUDE OIL.


References DAUD AHMAD BUTT PLANT MANAGER
Dhodak Gas Condensate Processing Plant.
Tounsa Shrif, Distt, D.G Khan-32100 Pakistan

MUZHER ALI KHETRAN SENIOR INCHARGE
(PROCESS)
Dhodak Gas Condensate Processing Plant.
Tounsa Shrif, Distt, D.G Khan-32100 Pakistan

ABDUL JABBAR DEPUTY CHIEF ENGINEER (Senior In charge Process) "CHANDA OIL FIELD"

Objective {To work with excellent prosperous Organization where performance is acknowledged and rewarding. Seeking a long term career growth which requires an extensive hard work and skill to come up to expectations of good Organization Strong physical Structure, Motivated and willing to work in hard fields}


 Joined OGDCL (OIL & GAS DEVELOPMENT COMPANY LIMITED) as Trainee Engineer IN 1996 and deputed at Dhodak Gas Processing & Condensate Stabilization Plant.
 Presently Working As “SENIOR PROCESS ENGINEER (PLANT INCHARGE)”.
 Responsibility for Controlling All the Process Parameters of the plant. Remained Involve in the Black Startup, Pre-Commission of Dhodak Gas Plant under the Supervision of Clough Engineering Group of Australia. Promoted on 01-12-2001 as Junior Process Engineer /Shift in Charge. In 2006, I was promoted as SENIOR PROCESS ENGINEER/INCHARGE PROCESS AND RELEIVER TO PLANT INCHARGE.


SULPHUR RECOVERY UNIT (SRU) USING CLAUSE PROCESS.

 Tank Form, Sour Gas Plant Using MEA Absorption Process (Girbitol Process).
 Planned Start-Up and Shut Down of MEA Pumps.
 H2S Absorption and Striping Column.
 Burner, WASTE Heat Boiler, Reactor, Reclaimer, Tail Gas Flare System and Sulfur Storage.
 Gas De-Hydration Process Using Molecular Sieves Process.
 LPG Plant (300 M.Tons/Day) Using Low Temperature Separation and Fraction of Solvent Oil and Raw Gasoline.
 Mercaptans Removal Unit for Refinery of Solvent Oil.
 Solvent Oil Loading & LPG Pumping.
 Gas Turbine for Compression and Heating Purposes (Turbine Driven Compressors).
 Fin Fan Coolers, Blowers, Heat Exchangers, Pumps, Compressors, Boilers, Striper, Absorbers.
 Fire & Safety Courses.
 Supervision and Instruction to Operators, Workers and also supervised the shift activates.
 Also have knowledge of Gad and Liquid Calculation of AGA Standard.


RESPONSIBILITIES:

• Process controlling ,trouble shooting of the plant, emergency handling, personnel handling, achieving production target, smooth operation of the plant, suggestion of up gradation of the plant, modification of the plant according to day to day changes, cold and hot start up and shut down of the plant, monthly production report,pdms,daily production report ,issuing of work permits, communication with superiors regarding plant position, taking instruction in case of any emergency condition of the plant. Shift communication to superiors and taking necessary suggestion regarding the operation.
Designing and reviewing of Project drawings and
Manuals, Plot Plans, Piping lay outs, Piping
Isometrics and Structural Details according to
API, ASTM & ASME standards

Area of operations  Central Control Room (CCR) is equipped with electronic Controller, Alarms Annunciations and Mimic Panels, ESD/OSD panels, Fire and Gas Control Panels, R/O Plant, Power Generators, PLC’s of the Refrigeration Package and Hot Oil Heaters, BENTLY NEVADA Vibration Monitoring System, Telemetry System (SCADA), Provision of Operating Deluge System from CCR.Wellhead and scraper receiver.
 Gas and condensate separation by slug catcher and inlet separator.
Gas de-dehydration with molecular sieves adsorption process.
Gas de-hydration with glycol (TEG) in Dakhni gas processing plant.
Condensate stabilization.
 LPG Fractionation and Liquid Recovery System Using Joule Thompson Expansion valve and Turbo Expander-Recompresses Machine (LPG Production is 190 M.Tons/ day).
Condensate Fractionation Unit (Refinery Unit) and
white products (Gasoline,
Kerosene, HSD, and DFO).
 TEL and Dye Blending Package ND HOBC Blending for PMG.
Storage of all white products, oil movement ad loading arms.
 Worked on the following Units and equipments:
 Slug Catcher and inlet separator by gravity
 TEG Dehydration Unit, Capacity 50 MMSCFD.
 Gas Dehydration with molecular Sieve Bed, Capacity 54 MMSCFD.
 Propane Refrigeration Unit (Austcold) with Screw Compressor driven by fuel gas Engine.
 Mercury Guard Bed with Activated Charcoal (Activated Carbon)
 LPG Recovery Unit with Capacity 200 MT/Day
 Gas-Gas Exchanger Plate Type.
 Turbo Expander & Re-compressor (Mafitrench)
 De-Ethanizer & De-Butanizer Columns.
 Sundyne Centrifugal Compressors & Ariel Reciprocating Compressors.
 Condensate Stabilization Unit.
 Condensate Fractionating Unit, Refinery Capacity 3000 BBL/Day.
 Shell & Tube Type Heat Exchangers, Kettle Type Reboilers, Stripper Columns, Centrifugal pumps & Fin Fan Coolers.
 Hot Oil System, Heaters by THERMOFLUX and hot Oil Pumps.
 Power Generation System, Gas & Diesel Generators by CATTERPILLAR.
 Sulfur Melting, Combustion, Converter, Waste Heat Boiler, De-Hydration of Air, Absorption, Cooling Tower, Economizer, Water Treatment Plant, and Blower & Pumps.

Utilities  Plant and instrument Air Package.
 Refrigeration Package.
 Hot Oil System.
 Fire Water System (Fire Water Main jockey Pumps, Hydrants, Monitors and Deluge System).
 Reverse Osmosis (R/O) Water Treatment Plant.
 Fuel Gas, Flare and Ignition system.
 Nitrogen Package.
 Power Generators (Gas& Diesel Fired).
Closed Drain & Open Drain Systems
Nature of job
Worked at these plants first as a Trainee Engineer, Process Engineer (shift in charge) & then as in-Charge Process.
Supervised manpower and shift activities, normal operation, facing abnormalities and other emergencies, safe& sound plant startup and shut down (hot &cold startup)

• [ 1989--1995 ] BACHELOR DEGREE IN CHEMICAL ENGINEERING FROM (PUNJAB UNIVERSITY LAHORE, PAKISTAN). [1995] WITH SPECIALIZATION IN PETROLEUM & GAS TECHNOLOGY.
• MBA (Masters in Business Administration from IBA, Institute of Business Administration, University of Karachi, Pakistan)
• Oracle Certified Professional (OCP) from ITG Pakistan.
• Three Years DIPLOMA IN COMPUTER SCIENCES with first division. And also topped in the ITG Pakistan (A Recognized Institution of Computer Science World Wide) including AUTOCAD SOFTWARE APPLICATION.
•
[ 1989--1995 ] CHEMICAL ENGINEERING WITH SPECIALIZATION IN PETROLEUM AND GAS TECHNOLOGY FROM PUNJAB UNIVERSITY LAHORE, PAKISTAN.
SPECIALIZATION IN PETROLEUM & GAS TECHNOLOGY

• Three Years DIPLOMA IN COMPUTER SCIENCES with first division. And also topped in the ITG Pakistan (A Recognized Institution of Computer Science World Wide) including AUTOCAD SOFTWARE APPLICATION.

 SULPHUR RECOVERY UNIT (SRU) USING CLAUSE PROCESS.

 Tank Form, Sour Gas Plant Using MEA Absorption Process (Girbitol Process).
 Planned Start-Up and Shut Down of MEA Pumps.
 H2S Absorption and Striping Column.
 Burner, WASTE Heat Boiler, Reactor, Reclaimer, Tail Gas Flare System and Sulfur Storage.
 Gas De-Hydration Process Using Molecular Sieves Process.
 LPG Plant (300 M.Tons/Day) Using Low Temperature Separation and Fraction of Solvent Oil and Raw Gasoline.
 Mercaptans Removal Unit for Refinery of Solvent Oil.
 Solvent Oil Loading & LPG Pumping.
 Gas Turbine for Compression and Heating Purposes (Turbine Driven Compressors).
 Fin Fan Coolers, Blowers, Heat Exchangers, Pumps, Compressors, Boilers, Striper, Absorbers.
 Fire & Safety Courses.
 Supervision and Instruction to Operators, Workers and also supervised the shift activates.
 Also have knowledge of Gad and Liquid Calculation of AGA Standard.