CV Night Toolpusher Iraqi Drilling Company Iraq, Dewan Drilling Company Pakistan, Kuwait Drilling Co

Resume built for oil and gas job opportunities by a jobseeker with experience in Night Toolpusher Iraqi Drilling Company Iraq, Dewan Drilling Company Pakistan, Kuwait Drilling Co - would you like to offer this candidate a job/contract employment?

CV/Resume ID no.: 115770
Last Updated: Tuesday, October 12, 2010

Night Tool Pusher job

Supervises and coordinates activities of workers engaged in drilling oil and gas wells in area consisting of one or more well sites: Directs workers to erect, dismantle, and move drilling rigs, and drilling crews in setting up and operating power units, draw works and other drilling equipment. Plans delivery of drilling tools, fuel, water, and other supplies for use at drill site. Orders type of drilling bits to be used according to type of strata encountered. Directs workers in mixing drilling mud and circulating mud in borehole, and in use of special drilling mud to prevent blowout from gas pressure. Orders installation of control head (Valve Device) to control flow when well begins to produce gas or oil. May supervise operations at producing wells to maintain and regulate flow of gas or oil (SUPERVISOR, PRODUCTION petrol & gas).While Moving Bleed off and recharge of Koomy Unite.

WORK EXPERIENCE:

 Experience with “Iraqi Drilling Company (Iraq) Ltd.” as a “Night Tool Pusher” from 20 June 2010 to till now.
Rig Type =Trailer Mounted Cantilever mechanical MR 10000 /1000 HP Drilling and Work over rig.
Nominal Capacity= 1,00,000 lbs with 10 lines, clear height156 FT.Drawworks= MR 1000 HP,Disc brakes Drum Dia8’,ELMAGCO NOV 3550w Mix RPM 1580, Engines= 3xCAT3408, 50 Hz Generators, Model 1400 Ross hill PCR system, TDS= Canrig 275 ton, with A/C motor, 5000 PSI rated with pipe handlers, Rotary table=Drillmec R 27.5 Mud Pump= Drillmec 1000 HP. Mud System =1400 bbls Total Capacity, BOP=EQUPMENT 21-1/4” 3000PSI and 13-5/8” 5,000 PSI, Traveling Block = 250 Ton American, Fuel= 60,000 Litres Water =700 bbl,Drilling Capacity = 10000 Ft,Drill String =8000ft 5” & 3000ft 3 ½ Cyber Bass Rig.


 Experience with “Dewan Drilling Company (Pakistan) Ltd.” as a “Night Tool Pusher” from 14th February 2009 to 10 June 2010.
Rig Hataf ZJ30/1700CZ.180 ton Mechanical Truck Mounted, Telescoping Mast Rig. The rig is working on Workovers of Dewan Shallow-1 & Dewan # 5 at Rodho field. Draw works=1050HP, Scr Rig. Max drilling capacity=5000 Meter with 2 7/8 DP and 3 1/8DC.Mud Pump=1000HP, Engines Cat.D398, D399. Rotary table= 27-1/2 with universal. BOP= EQUPMENT 21-1/4” 5000PSI and 13-5/8” 10,000 PSI. Traveling Block = 350Ton.


 Experience with “Kuwait Drilling Company (KDC)” as a “Driller/Night Tool Pusher ” from 27th January 2008 to 10 February 2009.
Job Description: Work at Rig site / Rig Floor to supervise floor activity while drilling, maintain drilling parameter, mud, safety and report to Tool pusher. Prepare Morning reports and daily report.
KDC Rig Specifications
Gross Nominal Capacity= 1,100,000 lbs with 12 lines, clear height142 FT.Drawworks= NOV 2000EDB, 2000HP Disc brakes, and Electronic Drilling System EDS-3, Pipe CAT= automatic pipe handler Engines= 4xCAT3512B 1476 BHP, 60 Hz Generators, Model 1400 Ross hill SCR system, TDS= NOV -11SA 500 ton, with A/C motor, 5000 PSI rated with pipe handlers, Rotary table= NOV 37-1/2” W/GE752 independent drive. Mud Pump= Oil well 1700PT.BOP= EQUPMENT 21-1/4” 5000PSI and 13-5/8” 10,000 PSI.Pipe and casing handling Equipment =ST-80 Iron Roughneck, PS-21 power slips, power tongs. 500 ton spider elevators, Casing power tongs, tubing tongs, CRT (Casing Running Tool 350 / 500 NOV, Traveling Block = 500 Ton American, Drilling Capacity = 15000 Ft to 20000 ft, Rig Type = Joy Stick Cyber Chair


 Experience with “Dalma Energy (in Saudi Arabia)” as a “Driller” from 15th March 2006 to 20th January 2008.

Dalma Rig Specifications
I do with this rig 2 explorations well in SALWA near Qatar Border. And 4 time well flow with shulamberger.I also do the Snubbing and hydraulic work over jobs with Shulamberger same location 4 time when I do the UBD (Under Balance Drilling) well flowing in Saudi Arabia on Azham Field and Salwa field. Many time Rig movening with out any injure.

Rig U.I.E = Drawworks 1500 HP Manual Break, National 110 UE Electric Drawworks, Mud Pump = 1300 HP, Traveling Block =550 Ton National, TDS VARCO S9, Total Drilling Capacity = 15000 Ft, BOP Cameron 13, 3/8- 10000 PSI. Engine= Caterpillar


 Experience with “Oil and Gas Exploration Company Krakow Limited” as a “Assistant Driller” from 03rd April 2002 to 27th February 2006.
Krakow Rig Specifications
All Rig Manufacture ADECO, Drawworks capacity = 1700 HP, Mud pump = 1300 HP D.C Motor, T/Block = 400 Ton, TDS = VARCO, Total Drilling Capacity = 4000 Meter, Engine = Caterpillar = Model No, D398, D399.


 Experience with “Oil and Gas Exploration Company Krakow Limited” as a “Derrickman” from 07th July 2000 to 02nd April 2002.


 Experience with “Oil and Gas Development Limited (OGDC)” as a “Derrickman” from 21st December 1998 to 01st July 2000.


 Experience with “Oil and Gas Development Limited (OGDC)” as a “Floorman” from 05th April 1997 to 20th December 1998.


 Experience with “Oil and Gas Development Limited (OGDC)” as a “Roust About” from 07th March 1993 to 10th May 1994.

Courses:
 International Well Control Form (IWCF) (VALID) Date / 24th NOV 2011.
 International Well Control Form (IWCF) (Exp) Date / 26th Aug 2009.

• Stuck Pipe.
• Drilling Practice.
• Accumulators & Mud Pumps.
• Rig Mathematics.
• Safety & H2S.
• Fire Fighting & First Aid.
• Safety Training Observation Program(Stop Course)
• Advance First Aid.
• Hazard Identification
• Advance Fire Fighting
• Lock out Tag out
• Safety Leadership
• EDS NJB 4900
• Occupational Health.
• Breathing Apparatus Basic Procedure (Proximity)
• HSE Induction with JO (Joint Operation)
• JSA (Job Safety Analysis)

• SCBA (Self Contained Breathing Apparatus)
• Basic Fire Fighting with (Proximity)
• H2S with (Proximity)
• Drilling Waste Management System with (Scomi)

COMPUTER KNOWLEDGE:
 ONE-YEAR DIPLOMA IN COMPUTER COURSE.
DOS, WINDOWS 98, MS WORD, MS EXCEL, VISUAL FOXPRO, Auto Cad, INTERNET & E-Mail.

As Night Tool Pusher
 Good relation with Client Company (Company man).
 I had been involved in drilling and work-over of different types of wells – Exploratory Deviated, Horizontal & Re-entry wells etc.
 Have come across many types of well problems – Stuck pipe, Bit failure, String wash out, fishing, losses etc.
 Worked in HSE sensitive situations – Oil base mud, H2S carrying formations.
 Co-ordinates with service company personals and third party equipments.
 Carry out routine safety inspections of various safety, drilling and rig equipments.
 Performed operations in a safe manner according to company policies and procedures.
 Promote the use of STOP for employees to the personnel supervision.

Qualities

 Always work with full safety, follow & apply all HSE rules and participate in HSE program.
 Plays an active part in QHSE meeting, Toolbox meetings, the TQM program and all other company safety management system.
 Take care of preventive maintenance of all major drilling equipments.
 Have good relations with my all supervisors and work with team spirit.
 Always ready to learn new things like new tools, new methods, new safety policies etc.
 Plan and keep everything ready for job with assistance provided by Night Tool Pusher.
 Observe proper rig operating procedure and highlighting unsafe practices.