CV Mechanical Maintenance Reliability Engineer, Bechtel Corporation Kingdom of Saudi Arabia

Resume built for oil and gas job opportunities by a jobseeker with experience in Mechanical Maintenance Reliability Engineer, Bechtel Corporation Kingdom of Saudi Arabia - would you like to offer this candidate a job/contract employment?

CV/Resume ID no.: 116464
Last Updated: Thursday, January 20, 2011

I am Mechanical Engineer with Master degree in Maintenance Management, 13 years of experience, have worked in the Middle East (Saudi Arabia), and I am ready to relocate. I am looking a position as a Maintenance/Reliability or Piping QA QC Engineer to make career in a prestigious company.

Jan 2008 – July 2010, Bechtel Corporation – Kingdom of Saudi Arabia
Jubail City, Royal Commission for Jubail & Yambu. Jubail 2 Infrastructure Project
Field Mechanical/Piping Engineer, Construction Department/Industrial & Ports.


Contract #204-C48: “Fuel & Feedstock pipelines for Jubail 2, Stage 1 (Methane & Ethane pipelines, 36”, 30”, 24”& less- 50 Km). Carbon Steel pipes.
- Reviewed Contractor's Technical Submittals, and determined its compliance with the Contract, Design, Royal Commission, Saudi Aramco and International Standards.
- Inspected materials received by Contractor (pipes, fittings, valves), reviewed Materials Certificates, Test & Inspections made by Manufacturer, and ensure its compliance with Project Spec, International Standards and S. Aramco SAER-1972.
- Reviewed Welding Procedure Specification (WPS), Procedure Qualification Records (PQR) and Welders Performance Qualification (WPQ), according with ASME IX, Saudi Aramco (SA) Standards #:SAES-W-012, SAEP-324, and RC-15057.
- Witnessed Welder Performance Qualification in Contractor Work Shop, w/third party inspection.
- Supervised Welding quality on site, reviewed essential and non-essential variables and records: materials, electrodes, thickness, diameters, joint design, welding maps.
- Supervised Blasting & Coatings activities made on C.S. pipes and structural steel, and ensure quality compliance with Standards: SAES-H-100, H-101 and RC-09874.
- Reviewed Valves Technical Spec (Globe, Ball, Gate, Check and Plug valves) 300# and 600#, regarding materials, dimensions & inspections. SAES-L-108, 04-SAMSS-035
- Reviewed Scrapper Launcher/Receiver Trap & Appurtenances design, according with SAES-L-420.
- Witnessed Hydrotest made on pipe systems as per ASME B31.8, SAES-A-004, 007, SAES-L-150, SAEP-327. Develop punch list items.
- Supervised Radiographies inspections made by sub-contractor on CS welded pipes w/films review. Monitor job quality according ASME V Article 2, Aramco SAEP1143.
- Inspected the Radiation Source Storage Pit as per Aramco Std SAEP-1141.
- Supervised installation of Reinforced Thermosetting Resin (RTR) pipes w/key lock and butt wrap mechanical joints, and ductile iron pipes, for underground Fire Water system, hydrants included. RC Std 02085, 02081.
- Supervised the installation of HVAC system on Control Room and Analyzer Building.
- Supervised installation of underground pipes for potable water and sanitary water, with flushing and disinfection according RC Std 15145.
- Reviewed Shop Drawings for CS, RTR and FRP pipes made by contractors.
- Performed civil and steel structures inspections: compaction, formwork, rebar arrangements, concrete and grout pouring, waterproofing membranes and bolt torque.
- Performed electrical and instrumentation inspections on site: installation of junction boxes, ZV valves, pressure transmitters, RTU's, DCS, ESD and LD systems.
- Initiated Technical Queries and Field Change Request, Developed recommended resolution and assure its implementation.
- Submitted daily progress report and attended to progress project meetings.
- Reviewed Contractor Progress Invoice on a monthly basis.
- Submitted Non Conformance Reports (NCR's) for Deficiency items.
- Attend to the RC monthly safety meetings and filled the weekly safety matrix.

Contract #021-C04 "P&C for Infrastructure for Labor Camp".
- Inspection of Steel Tanks (20.000 and 40.000 lts) for water storage. Performed welding visual and NDT inspections for bottom, shells and roof, internal steel structures, sandblasting and painting, as per API-650.

Contract #204-C43R: “Construction of Support Facilities for King Fahad Industrial Port (KFIP) Berths - Quay 2".
- Supervised and inspected the fabrication and erection of steel structures (Hose Towers) on Five Berths, Quay # 2, KFI Port. (40 m height).
- Supervised Service Systems Installation: Compressed Air, Nitrogen and Foam Fire Water for each Hose Tower (Vessels and piping) as per contract standards.

Contract #065-C46R: “Infrastructure of Stahe 2-Phase II (Sea Water Cooling Pipes)".
- Supervised and inspected the underground installation of 4000 mm and less diameter, RTR pipes.

March 2001 – Jan 2008, Accroven, S.R.L. (Williams US-company in Venezuela)
Barcelona, Anzoategui, Venezuela
Mechanical Engineer, Technical Dept. LNG Extraction & Fractionation Plants (Gas).
- Respond as required to three Gas Plants mechanical engineering needs and problem resolutions. Ensure sufficient technical reference documentation is available.
- Vibration and Oil Analyst in Rotating Equipment for the three plants.
- Predicted Failures in Rotating Equipments.
- Performed the Data Base in Rotating Equipment for the new plants in the Vibration SKF Prism4 and Machine Suite Softwares.
- Performed Technical Specifications for Pressure Vessels, Heaters, Flares and Pipe Inspections with Non Destructive Test, based on ASME Boiler & Pressure Vessel Code and API Inspection Codes: 510, 570,572,573, 574.
- Used the SKF Microlog Portable Vibration Collector.
- Performed Technical Specifications for Mechanical Spare Parts, Pipes, Valves (Data Sheet), Welding, Non Destructive Examinations (NDE), Pipe Coatings and Insulation.
- Supervised Maintenance Execution in Rotating and Static Equipment and provide technical support to the maintenance section during shutdown/overhaul activities.
- Performed Root Cause Analysis on Plants failures.
- Performed Technical Specifications for Special Contract Services.
- Supervised the Special Contract Services Activities (Maintenance and Engineering). Ball Valve Maintenance and Hydrotest as per API 6D.
- Performed Procedures for Special Contract Services Execution.
- Performed Conceptual and Basic Engineering in the required Projects and Plant Changes (MOC), to overcome bottlenecks, operability problems, improve production, efficiency and reliability. Make Piping Design and Mechanical Spec, based on ASME B31.3.
- Write and Audit Maintenance Procedures of our O&M Manuals.
- Able to interact effectively with other specialist disciplines both inside and outside the organization.
- Make the Maintenance Superintendent role when he is on vacation.
Made Decisions in:
- Shut down of rotating equipments based on predictive maintenance that could affect the mechanical, personnel and ambient integrity, in order to take the necessary corrective actions.
- Replace pipes segments, based on its corrosion velocity and internal pressure calculus.
- Special Maintenance, Inspections and Engineering Activities Supervision.
- Prioritization of Special Required Services.
- -Maintenance Contracts Management.


Feb 2000 – March 2001, Cemex/ Pertigalete Cement Plant
Barcelona, Anzoategui, Venezuela.
Maintenance Inspector
-Vibration and Oil Analyst in Rotating Equipment.
- Predicted Failures in Rotating Equipments.
- Done Vibrations Routes with the CSI Portable Vibration Collector.
- Worked with the Master-Trend CSI Vibration Software.
- Used JDE Software to make and manage Job Orders for Maintenance Dept.
- Done Inspections in Rotating Equipment.
- Supervised Maintenance Execution in Rotating Equipment.
- Supervised NDE in Static Equipments made by Contractors.
- Performed Root Cause Analysis on Plants Failures.


Jan 1998 – Jan 2000, POLAR/ZIC/TRIMECA
Barcelona, Anzoategui, Venezuela.
Project Engineer
- Supervised Piping and Equipment Erection (Rotating and Stationary) in Petrochemical and Beer Industry, in the Fertilizer Plant project (Fertinitro) and Potable Water project with chemical chlorination system.
- Supervise the civil foundations and leveling of submergible and horizontal pumps with alignment activities, pipe spool fabrication, sandblasting and coating.
- Performed Weekly and Monthly Mountings Reports.
- Performed Drawings and Piping Isometrics Reviews.
- Supervised Non Destructive Test in Pipes and Equipments.
- Performed Punch List of Pipes and supervise as built drawings.


Apr 1997 – Jan 1998 VEPICA CONSULT ENGINEERING.
Barcelona, Anzoategui, Venezuela.
Project Engineer
-Elaborated Plant and Isometrics Piping Drawings for Different Oil & Gas Projects.
-Plants Visits to Gather Actual Info.
-Elaborated Mechanical Material List and Bill of Quantities.

EDUCATION
1. Science B. ,Colegio San Ignacio de Loyola, Caracas, Venezuela, 1978-1991
2. BS Mechanical Engineer, Universidad Simon Bolivar, Caracas, Venezuela, 1997.
3. Magister Scientiarum (MSc.) in Maintenance Management, Universidad Nacional Experimental de las Fuerzas Armadas Nacionales (UNEFA-UDO), Caracas-Bercelona, Venezuela, 2002.
4. Finance Management Program, Universidad Metropolitana, Barcelona, August 2004.

Microsoft Office (Word, Excell, Power Point, Outlook, Project), Condition Monitoring Vibration Softwares. Maintenance softwares (CMMS): MP2 and JDEdwards.

SUMMARY OF SKILLS
Experience in Plant Operation, Maintenance and Construction.
Knowledge in Welding Procedures WPS, PQR, WPQ (ASME IX)
Non-Destructive Examinations Test and Corrosion
Software: Microsoft Word, Excel, Power Point, Project.
Vibration Analyst (Level II) in RotatiNG Equipment.
Oil Analyst (Level I).
Vibrations Softwares: Prism4, Master Trend.
Vibrations Portable Collector: Microlog and CSI.
Maintenance Softwares: MP2 and JDE.
Knowledge of Alignment and Balance in Rotative Equipment.
Knowledge in Mechanical Seals and Bearings.
Industrial Instrumentation.
Reliability Methodologies and Mechanical Integrity.
Turboexpander and Gas Turbines basic knowledge and overhaul.
Knowledge of Standards and Codes such as: ASME, ASTM, API, ARAMCO, PDVSA.
Languages Skills: Fluent Spanish and English.
Interfaces and acts as focal point with associated engineering contractors, equipment and process vendors and suppliers.
Strong personal work ethic, self starter, adaptable and able to work cooperatively with a team.