CV Piping engineer or piping supervisor, LNG, Refinery, Petrochemical and Oil & Gas plants work

Resume built for oil and gas job opportunities by a jobseeker with experience in Piping engineer or piping supervisor, LNG, Refinery, Petrochemical and Oil & Gas plants work - would you like to offer this candidate a job/contract employment?

CV/Resume ID no.: 127593
Last Updated: Wednesday, April 25, 2012

Sir,

I wish to submit my resume for the suitable post in PIPING at onshore or offshore (Oil & Gas plants). Kindly, give a chance to serve in your organization.

EMPLOYMENT HISTORY:

• JULY 2011 TO TILL DATE
Position:- FIELD ENGINEER- PIPING (OFFSHORE)
SAIPEM (EPC), HOOK-UP & COMMISSIONING
PROJECT, KASHAGAN- OFFSHORE, D-ISLAND,
KAZAKHSTAN, (Agip KCO).

• JULY 2010 TO MARCH 2011
Position:-PIPING SUPERVISOR
DAELIM ENGINEERING (EPC), SAUDI POLYMERS,
NATIONAL CHEVRON PHILLIPS SOUTH PLOT PROJECT,
JUBILE, SAUDI ARABIA.

• AUGUST 2009 TO MAY 2010
Position:-SUPERVISOR-PIPING/LINE CHECKING (FIELD)
CHIYODA TECHNIP JOINT VENTURE (EPC), QATAR
GAS 3&4 LNG PROJECT, RAS LAFFAN IDUSTRIAL
ESTATE, QATAR.

• MAY 2007 TO JUNE 2009
Position:-SUPERVISOR-PIPING (FIELD)
TECNIMONT & SK ENGINEERING JOINT VENTURE,
SK ENGINEERING &CONSTRUCTION (EPC),
(EQUATE) KPPC PROJECT, KUWAIT.

• AUGUST 2006 to APRIL 2007
Position:-SUPERVISOR-PIPING (FIELD)
RAS LAFFAN OLEFINS ETHYLENE CRACKING
PLANT. RAS LAFFAN INDUSTRIAL ESTATE, QATAR.

• MAY 2005 to JULY 2006
Position:-SUPERVISOR-PIPING (FIELD)
ABUDHABI ONSHORE OIL OPERATION
COMPANY- (ADCO) PROJECT,
TECHNIP-ABU DHABI, U.A.E.




• AUGUST 2004 to MAY 2005
Position:-PIPING ENGINEER(FIELD)
RELIANCE PETROLEUM LIMITED (EPC) , INDIA.

• AUGUST1998 to AUGUST 2004
Position:- SITE ENGINEER
PIPING&EQUIPMENT ERECTION, AUM REFINERY
CONSULTANCY PRIVATE LIMITED (EPC), INDIA.


• JULY 2001 to AUGUST 2002
Position:-SITE ENGINEER
SANMARK (REFINERY) LIMITED, DALIAN, CHINA.
• DECEMBER 1996 to AUGUST 1998
Position:-TRAINEE ENGINEER
ENGINE FACTORY & COPPER ALLOY INDUSTRIES,
INDIA.

ADDITIONAL COURSE DETAILS:-
1. NDT ASNT LEVEL – II (RT, UT, MT & PT)

2. BOSIET - OPPITO

3. AUTO CAD- Release 14 and 3D modeling courses completed in
INFO DATA SYSTEM, AUTODESK, Chennai, India.

4. ADCO Permit to Work (Job Performer in Hazardous area) course completed in
National Training Center, ABU DHABI- L.L.C., U.A.E.
(Eligible to work in Abu Dhabi Company for On-shore Oil Operation Sites).

5. GAS TESTING course ( H2S,CO,O2 Rich& Deficiency) and CONFINED SPACE
ENTRY course completed in TECHNIP FRANCE HSE Training center,
DOHA, State Of QATAR.

6. PTW Course completed in TECNIMONT & SKEC TRAINING CENTER and
QATAR GAS -1 LNG PTW in KUWAIT.
7. FIRST AID course in St. JOHN Ambulances Association, Sivakasi.
( Ministry Of Health & family welfare, INDIA.)
8. Safe Lifting Supervisor (RIGGING SUPERVISOR) course completed in
GERMANISCHER LLOYD – OIL & GAS, DOHA, State of QATAR,
(Certified by QATAR PERTROLEUM, DOHA).
9. SWIFT PROFESSTIONAL (MS-Office) Course completed in
National Institute of Information Technology, Chennai, India

1. Well versed in MS office
2. well versed in AUTO CAD

CAPABILITIES :-

 Piping works such as Piping Fabrication, Piping Erection
and Installation in LNG, Refinery, Petrochemical and Oil &Gas plants.
 Line checking/punch listing, tie-in and Pre-commissioning activities in offshore and onshore.
 Pre-commissioning /commissioning activities like Air blowing, Steam blowing, water Flushing, Chemical cleaning, Leak test, Hydrostatic test, Pneumatic test activities in Offshore and Onshore.
 Familiar in Pipeline fabrication and erection materials management activities and such as locating piping Tie-ins for hook up in existing plants.
 Review drawing and coordinate with chief discipline engineers where needed. Coordinate with subcontractors supervisors to assure that required submittals are obtained from subcontractors. Supervise quantity take-off as required to monitor and control works.
 Monitoring sub-contractors inspection schedules and ensure testing is performed. Perform other related issues as directed by management. Monitoring of progress of commissioning works with respect to installation interfaces.
 Interface with Fabrication yards related to delivery and assembly of sub-contactors equipments. Preparation of standard installation procedures. Assistance in bid and study work relating to pipeline and spool installation.
 Ensure that site activities are completed in accordance with installation
engineers requirements and procedures.
 Familiar in Erection and Testing of Steam tracing lines in accordance with P&ID.
 Familiar in installation of VALVE INTER LOCKS and Service(maintenance) knowledge in Geared valve’s like butterfly valves, plug valves, Globe valves and Ball valves.
 Familiar in BOLT TORQUEING and TENSIONING
 Computer Literate, Microsoft, Word, Excel, CADD and Auto Cad Drafting
 Drafting, design and as-built drawings
 Weld Map Marking (Before releasing the Isometric Drawing to the site for Construction.
 Method Statement Preparation for Pre-Fabrication & Erection of Underground and
above ground piping).
 Excellent Knowledge in visual inspection DPT, MPT, RT
 Familiar with company Quality of Health Safety and Environment (QHSE) management system procedure and policy. Safety conscious in all work and behavior and use compulsory protective equipments as necessary. Report any safety hazard to my immediate superior.