CV Lead E&I Engineer/QA/QC Inspector onshore & offshore P.T. McDermott Indonesia

Resume built for oil and gas job opportunities by a jobseeker with experience in Lead E&I Engineer/QA/QC Inspector onshore & offshore P.T. McDermott Indonesia - would you like to offer this candidate a job/contract employment?

CV/Resume ID no.: 127629
Last Updated: Thursday, February 9, 2012

Combine 24 years experience in the field of Electrical, Instrumentation & Control, Telecom and Fire & Gas with 19 years in Construction, 4 years in Maintenance and a year in Design. Experience includes design engineering calculations & sketches, materials take-off & estimating, calibration, installations, pre-commissioning, commissioning, repair and maintenance, quality assurance and control inspection. Started from the rank of Instrumentation Technician, Foreman, Supervisor, Inspector, Engineer to Superintendent. Approve SAUDI ARAMCO QA/QC Inspector for Instrumentation and BP (British Petroleum) AIOC (Azerbaijan International Operating Company) Electrical, Instrumentation, Telecom & F&G QA/QC Inspector with certificate on Explosion Protection on Hazardous Area Classification; Kellogg, Brown & Root Documentum user and a BP & ESSO Permit to Work Performing Authority. Familiar and conversant in International Codes like; IECEX 60079, NEC 200/300/400/500 to 800, NFPA 70, API RP 500/505/540/551, BS 500214/18/20, AS/NZS 3000/60079/62086 etc., ISO 9000/1/2/3, SAES Saudi Aramco Engineering Standard, NEMA, Exxon Mobil GP, ESSO DS and others.

Receiver of various academic and job awards including a scholarship grant for postgraduate studies in Master in Management major in Management Engineering. Attended various skills and Management enhancement training & seminars and computer literate (MS Office, KBR Documentum, McDermott PIMPS, SPORTS).

Major Topsides project worked/completed; Aramco Zuluf Gas Oil Separation Platform (GOSP) 3 & 4 Saudi Arabia, AIOC BP Production Drilling & Quarters Platform PDQ Central Azeri and West Azeri, Compression, Water Injection & Production (CWP) Platform & Production, Compression, Water Injection & Utilities (PCWU) Platform, Baku, Azerbaijan. Oil and Gas (LNG) Terminal: Sangachal Terminal Expansion project Trains 2 & 3 and Sha Deniz Gas (LNG) Export Terminals, Baku, Azerbaijan. Harad Gas (LNG) Plant, Harad, Saudi Arabia. Conoco Phillips Central Production Platform (CPP) Su Tu Vang, Chevron Platong Gas II Living Quarters, and ESSO, Australia Marlin B Jacket & Platform, Batam Indonesia.

P.T. McDermott Indonesia
Batam, Indonesia
February 2008 – November 2011
Lead Electrical & Instrumentation Production Engineer

Project assignment: Conoco Phillips (CPP) Central Production Platform Su Tu Vang, Chevron Platong Gas II Living Quarters and ESSO Australia Pty Ltd TURRUM PH2 Marlin B Jacket & Platform

Duties and Responsibilities:

• Conversant with the Project HSES Plan. Proactively participate in achieving the highest possible International standard of HSES implementation.
• Reviewed and approved constructability of the design drawings for electrical, instrumentation, fire and gas and telecom installations and ensure that it’s in accordance with all relevant codes, standard, client project specifications, and project systems and procedures. Provide marked-up/redline if applicable/necessary.
• Ensured that proper control and monitoring of project expenditure on electrical, instrumentation, telecom, fire & gas installations were effectively carried out within budget, especially the construction activities man-hours.
• Supervised the correct selection of materials & equipment, its quantity and monitor the progress of procurement and initiate material receiving inspection and issuance through all stages of the 3 projects.
• Directed, supervised and guided the E&I Production Engineers and construction supervisors for their daily installation, completion, punch list rectification, drawings as-built/redlining and material reconciliation activities during the tenure of Conoco Phillips Su Tu Vang, Chevron Platong Gas II and ESSO Turrum Ph 2 Marlin B Jacket & Platform Projects.
• Attended all daily construction, completion and punch list issues and meetings then initiate proposal/solution to identified problems/issues, and if necessary raise a site query (SQ) to seek client approval, and if applicable raise the corresponding revision order (RO) then take note and submit if necessary a lesson learned (LL).
• Directed and supervised the development of work packages indexing and work packages preparation, implementation, monitoring, control and completion/closure for E & I disciplines on the 3 projects assigned.
• Coordinated the resources and liaised with construction management, Client, Inter department for the E&I daily construction activities and its progress and with procurement if Vendor/Supplier technical assistance is required and arranged Vendor representative or technician to come to project site if necessary.
• Spearhead E&I Punch List Team and manage, plan, execute and control punch list clearing in coordination with client E&I inspection team and submit records to the Certification Clerks for the provision of data entry to Quality Control System (QCS) certification database on (PIMS) Project Information Management System.

TEKFEN
Baku City, Azerbaijan
January 2007 – October 2007
Senior Electrical & Instrumentation (E & I) QA/QC Inspector

Project assignment: British Petroleum and Azerbaijan International Operating Company joint ventures

Deep Water Gunashli-Production Compression Water Injection and Utilities Platform (DWG-PCWU)
(Topsides Areas)

Duties and Responsibilities:

• Conversant with the Project HS&E Plan. Proactively participate in achieving the highest possible International standard of HSE implementation.
• Directed, supervised and guided the E&I inspectors during the tenure of DWG-PCWU Project.
• Allocated and managed E&I inspectors during routine installation and testing activities.
• Coordinated the resources and liaised with construction management and supervised to ensure adequate inspection coverage of all E&I ongoing construction & completion activities.
• Provided inspection techniques and expertise to construction supervisors to aid and expedite compliance with specified quality and technical requirements.
• Coordinated E&I inspection records with Certification Clerks in the provision of data entry to Quality Control System (QCS) [certification database on WinPCS].
• Ensured continuous accurate QC records maintenance by E&I inspection personnel.
• Liaised with Completions department, Senior Certification Engineer & Construction departments to ensure seamless transfer of QC records and knowledge transfer between disciplines.
• Performed inspection duties as required to verify compliance to project stipulated procedures, specifications and noted standards and verify the test results.
• Performed Advance Safety Audit and make necessary Reports and Stop Cards requirements.

• Attended daily toolbox meeting complying with the RTC (Risk assess it, Talk it, Check it) requirement of the project.

AOQC MOODY INTERNATIONAL LIMITED (Manpower supplied to Azerbaijan International Operating Company) Baku City, Azerbaijan
September 2005 – November 2006
Senior Electrical & Instrumentation (E & I) QA/QC Inspector (Client Representative)

Project assignment: Azerbaijan International Operating Company Operated by British Petroleum

Sangachal Terminal Expansion Programme (ACG Oil Terminal Phase 2 & 3 and Sha Deniz Gas (LNG) Export Terminals)

Duties and Responsibilities:

• Performed Quality Assurance/Control inspection on Contractor’s Quality Assurance/Control construction activities and monitor or witness their work on a daily basis.

• Performed surveillance of contractor’s activities and ensure that all Electrical, Instrumentation and Telecom installation were carried-out in accordance to the approved for construction drawings and specifications, procedures, instructions and in compliance to the project specification and related International Standard.

• Reviewed project specifications/code requirements and their implementation on the field.

• Coordinated with the construction and other department teams for the implementation of the project Quality Control program.

• Initiated raising of non-conformity report (NCR) for any non-conformity that may arise in the field.

• Carry out punch-listing on Mechanical Completion Tri-party walk-down Acceptance and monitor closing of punch listed items.

• Ensured that the Contractor abides with the Safety Standard of the BP/AIOC British Petroleum / Azerbaijan International Operating Company Health Safety and Environment policy.

• Performed Advance Safety Audit and make necessary Reports and Stop Cards requirements.

• Responsible for execution, witnessing and reporting of all visual and dimensional inspections including calibrations, test shown in inspection and test plans related to Electrical, Instrumentation, Telecom, Fire and Gas and Cathodic Protections.

KENTZ CASPIAN LIMITED (Manpower supplied to [ATA] Amec, Tekfen, Azfen Consortium)
Baku City, Azerbaijan
October 2004 – July 2005
Electrical & Instrumentation (E & I) QA/QC Inspector

Project assignment: British Petroleum and Azerbaijan International Operating Company joint ventures

Central Azeri Compression and Water Injection Platform (CA-C&WP)
(Topsides Areas)

Duties and Responsibilities:

• Performed Quality Assurance/Control inspection for Mechanical Completion activities and confirmed/approved the Inspection & Test Method (ITM) work package where applicable prepare punch list and attached to the ITM and submit the same to Completion Department for Project Completion System (WINPCS) input.

• Liaised with ATA Project Team and AIOC Project Team members, ATA Consortium members Quality Assurance Department personnel, Completions Team member, vendor representatives, construction, safety and other concerned departments for QA/QC inspection activities.

• Witnessed insulation, continuity and hi potential cable testing, cold loop checking, earth continuity resistance test, low ohm test for bus bars, bench & field calibration, leak testing, instrument function test and installation.

• Performed pro-active QA/QC inspection to the ongoing construction activities to align/comply all construction output to the specific project procedures, standards, specifications and ensure that it follows all relevant approve for construction drawings and review all documentation associated with Electrical and Instrumentation installation including Inspection & Test Plans (ITP), Procedures, Method Statements, Vendor Documentation and Maintenance and Operations Manuals.

• Periodic inspection of cabinet termination, glanding and neatness, penetration sealing and cable identification.

• Checking of installation practices and quality of installation, alignment, level and orientation.

• Pre-run checking and punch-listing of equipment, system and component shortfalls.

• Circuit testing preparation and witness pre-commencement power / signal checks.



MCDERMOTT CASPIAN CONTRACTOR, INCORPORATED (MCCI)
Baku City, Azerbaijan
November 2003 – August 2004
Electrical & Instrumentation (E & I) QA/QC Inspector

Project assignment: British Petroleum and Azerbaijan International Operating Company joint ventures

Central Azeri & West Azeri Production, Drilling & Quarters Platform (CA/WA-PDQ)
(Topsides and Drilling Areas)

Duties and Responsibilities:

• Performed Quality Assurance/Control inspection for Mechanical Completion activities and confirmed/approved the Inspection & Test Record (ITR), where applicable prepare punch list and attached to the ITR and submit the same to Project Information Management System (PIMS).

• Coordinate with the construction and mechanical completion, safety and other concerned departments for QA/QC inspection activities.

• Witnessed insulation, continuity and hi potential cable testing, cold loop checking, earth continuity resistance test, low ohm test for bus bars, bench & field calibration, leak testing, instrument function test and installation.

• Performed pro-active QA/QC inspection to the ongoing construction activities to align/comply all construction output to the specific project procedures, standards, specifications and ensure that it follows all relevant approve for construction drawings.

• Make a record or report on hard and soft copy of the ITR done each day for the QA/QC department ITR tracking.

• Prepared necessary drawings like; Instrument Layout Drawing (ILD), Piping & Instrument Diagram (P&ID), LOOP Diagram, (FGD) Fire and Gas Layout Drawing, (TLD) Telecom Layout Drawing, (BLD) Block Logic Diagram, Cable Schedule, Instrument/Cable Indexes, and other pertinent drawings needed for inspection.

FOUAD ABDULLA FOUAD COMPANY LIMITED (FAFCO)
Dammam, Kingdom of Saudi Arabia
September 2002 – September 2003
QA/QC Engineer - Instrumentation Supervisor

Project Assignment:

ARAMCO HARADH GAS PLANT (New Plant Construction)
TECHNIP Italy/FAFCO Project for Utilities & Offsite Facilities

ARAMCO ABQAIQ PLANTS (Maintain Gas Compression Capacity Project)
TECHNIP France Manpower Supplied as Instrumentation Supervisor - QA/QC Inspector

Duties and Responsibilities:

• Performed management function as an Instrumentation Supervisor and Quality Control Inspector/Engineer in installation and pre-commissioning activities.

• Performed Quality Control inspection and proper documentation in instrumentation Phase of Work in HARADH Gas Plant Project covering quality control inspection, testing and pre-commissioning activities.

• Performed inspection for proper installation, wiring, termination, Bench and Field Calibration, Insulation Testing, Loop Checking and Pre-commissioning of systems of Equipment, Control System and Field Instrumentation work including Level, Flow, Pressure, Temperature, Control Valves, Actuators. Fire and Gas Detection System.

• Performed material receiving checks, material take-off verification and quantity rechecking and quantity progress reporting during installations and pre-commissioning.

• Ensured the correct preparation of Quality Control inspection & testing reports, loop packages, which include calibration certificate, P&ID, ILD & other attachment required for inspection acceptance and mechanical completion reports.

• Ensured all installation complies with SAUDI ARAMCO Standard & Specification, and applicable industry code practices, i.e. ISA, API RP550, IEEE, NEC & NFPA 70, etc.

• Coordinated to Sub-Contractor’s Quality Control Inspector and Saudi ARAMCO Inspectors for Request for Inspection activities and inspections comments, resolutions and closing of NCR.


EMCO PLYWOOD CORPORATION (EMCO)
Magallanes, Agusan del Norte, Philippines
February 1996 – March 2002
Instrumentation Superintendent
* Research & Development Superintendent (Concurrence)

Duties and Responsibilities:

• Performed management function as an Instrumentation / Research and Development Superintendent.

• Perform the duties and responsibilities of the Calibration Officer in line with ISO 9002 requirements including the supervision and checking.

• Performed In-house calibration of IMTE including control valves, positioner, flow, level, pressure & temperature transmitters, transducers, controllers, chart recorders, metering and gauges, calipers, micrometers, weighing scales, moisture testers, measuring tapes, etc.

• Performed Quality Control inspection and proper documentation in instrumentation of all Inspection, Measuring and Test Equipment (IMTE).

• Responsible on the design, installation, quality control and commissioning in the modification of purely pneumatic to electronics boiler control system of two bunker and wood fired boilers and Steam Turbine Generator; Instrumentation and Electrical side only. The design includes among others the control valve and orifice sizes calculations and use of smart pressure, level, flow and temperature transmitters and positioner for the cascaded closed loop system with a cascaded controller of two elements system. Modutrol, very low pressure transmitter and a single element controller also for close loop system for damper control of air and flue gas. Metering and chart recording for temperature, pressure, level and flow of super heated steam generated. Pneumatic system from the design of air dryers, filter, tanks, cylinders, positioner, etc.

• Responsible for project undertaken materials take-off, preparation and acquisition, project job supervision from installation up to maintenance.

• Responsible for the establishment, implementation, maintenance and continuous improvement of company’s ISO Quality Management System starting from planning, creating and documenting company’s three hierarchy manuals up to certification and maintenance.

• Responsible for company’s streamlining of human resources derived from rigid research and study of company’s machines and operations manpower requirements.

MADI AL MADI ESTABLISHMENT FOR CONTRACTING (MAECO) Manpower Supply to SABIC Services Ltd.
Riyadh, Kingdom of Saudi Arabia
January 1995 – December 1995
Instrumentation Engineer

Project Assignments:

Jubail Industrial Site:

Arabian Petrochemical Company (PETROKEMYA)
Al Jubail Fertilizer Company (SAMAD)

Yanbu Industrial Site:

Saudi Yanbu Petrochemical Company (YANPET)
Arabian Industrial Fibers Company (IBNRUSHSD)
Duties and Responsibilities:

• Performed management function as an Instrumentation engineer for the Materials Catalog Standardization Project of Saudi Basic Industries Corporation (SABIC).

• Performed materials assessment, identification, necessary testing, and data collections and grouping for all instruments, devices, automation and controls in the categories of Instrumentation, Electronics, communication, laboratory, control and test. It includes among others the materials or parts descriptions, specifications, services and special purpose spare parts for materials catalog standardization.

• Performed the Quality assurance and control of the above activities.

• Responsible for weekly and monthly production progress report and daily coordination with the client warehouse personnel.

MOHAMMAD AL MOJIL GROUP (MMG)
Dammam, Kingdom of Saudi Arabia
October 1992 – October 1993
Instrumentation Foreman & (QC Inspector, Field Utilized)

Project Assignment:

Zuluf GOSP-3, GOSP-4 (ARAMCO Offshore) Increase Capacity Project

Duties and Responsibilities:

• Performed management function as an Instrumentation Foreman and QC Inspector as being utilized in the field for the offshore construction works.

• Performed construction works and assuring subsequence quality control for the installation of Honeywell Smart; pressure, Differential pressure, flow, level and temperature transmitters 3000 series, gauges, switches, Micro Motion density & flow transmitters, Vently Nevada control panels and proximators, vibration and speed pick-ups, analog and digital transmitters and other plant instruments and control equipment and devices.

• Performed cable termination of instrument and control cables from instrument to marshalling panel and to TDC 3000 consoles and other control devices.

• Performed insulation or meggering test of instrument and control cables, loop checking and simulation for field calibration verification passing the ARAMCO standard.

• Performed bench calibration and configuration of analog and digital smart transmitters, transducers, gauges, indicators, switches and other plant instruments and ensure that it would pass the ARAMCO standard.

• Assisted Vendors in up grading and pre-commissioning of Gas Turbine Generator and Switch Gear, Heating Ventilating and Air-conditioning System using (4) 30 tons capacity compressors and also for Fire and Gas Detection System.

• Coordinated with the Engineering section regarding plans details, diagrams, revision and catalogs for the necessary reference in carrying out the job in the field.
ASIA BREWERY INCORPORATED (ABI) (New Plant Construction)
El Salvador, Misamis Oriental, Philippines
January 1991 – February 1992
Instrumentation Engineer

Duties and Responsibilities:

• Performed management function as an Instrumentation Engineer in the Beer Processing & Tank Farm areas.

• Responsible for the design of instrument and control cables raceway, pneumatic lines for control and instrument devices; such as Siemens Simatick S5, Omron & IDEC IZUMI PLC, proximity switches, solenoid valves and other devices in accordance to local and national code of standards.

• Take-off materials needed for the installation of field instruments, devices such as PLC, transducers, controller (SIPART), Foxboro transmitters, conductivity switches, pH meter, control valves and other devices.

• Supervise the installation of instruments and control devices, conduiting and cable pulling, pneumatic and hydraulic impulse piping lines and ensure that it conforms to local and national code of standard.

• Performed insulation testing (Meggering) of signal and control cables, termination and loop checking and documentation thereafter.

• Performed calibration of instruments, measuring and indicating devices, like; level, flow, pressure and temperature transmitters, I/P transducers, control valves and positioners, metering and gauges.

• Performed commissioning work on the Beer Processing and Tank Farm areas machines like; Yeast Press and Dryers, Clean In-Place (CIP) system and other equipments and assist the German Technician in the commissioning of Brew House and Silo/Milling process areas.

• Performed trouble-shooting; repair and preventive maintenance work in the process areas that aim a zero breakdown.

DATA WORLD COMPUTER CENTER
Cagayan de Oro City, Philippines
June 1990 – January 1991
Maintenance Supervisor (Computer Hardware Department)

Duties and Responsibilities:

• Performed management function as a Computer Hardware Maintenance Department Supervisor.

• Scheduled Technicians for Sales Technical support activities like; product demonstration, product installations, and hardware components, peripherals and other support devices assembling especially during products delivery.

• Performed Labor Charges Estimates and Quotations for computer, hardware components, peripherals and other devices repair charges.


FNE MACRO SALES
Cagayan de Oro City, Philippines
May 1986 – June 1990
Sales and Technical Support Engineer

Duties and Responsibilities:

• Performed management function as an Industrial Sales and Technical Support Engineer for GOULDS Water Pumps and its water system controls and related automation devices.

• Attended bidding proceedings and design proposal discussions aiming for customer’s utmost satisfactions.

• Responsible for Water System Design from technical data gathering like; system’s Total Dynamic Head (TDH), well data, water consumption, electrical requirements, instrumentation and control requirements; materials take-off, installation and commissioning supervision.

• Submitted sales reports and plans and attends regular Sales meetings & enhancement training and seminars.

EDUCATIONAL BACKGROUND:

LEVEL SCHOOL ADDRESS YEAR COURSE

Elementary Lourdes Elementary School Lourdes Alubijid, Mis. Or. 1972-1978 Elementary

Secondary Misamis Or. Gen. Comp. High School Cagayan de Oro City 1978-1982 Secondary

College Don Mariano Marcos Mem. Poly. State Col. Cagayan de Oro City 1982-1987 BSECE
(B.S. in Electronics & Communications Engineering [PECE] Professional Electronics Engineer)

Postgraduate Liceo de Cagayan University Cagayan de Oro City 1997-1999 MMME
(Master in Management major in Management Engineering)
TRAINING AND SEMINARS ATTENDED:

TITLE CONDUCTED/GIVEN BY

WebTop Documentum Kellogg Brown & Root

Performing Authority Permit to Work System British Petroleum / Azerbaijan International Operating Co.

Explosion Protection for E & I Inspectors Industrial Support Services Company Limited

Industrial Calibration Scientific Standard Services

Advance Electro-Pneumatic Controls FESTO DIDACTIC International

Hydraulic Engineering John Turner (Hydraulic Engineer/Consultant)

Advanced Programmable Logic Controller Industrial Controls Corp. & OMRON Asia Pacific PTE (LTD)

Electro-Pneumatic & PLC Applications SMC Pneumatic International

Instrumentation and Calibration Techniques Industrial Controls Corp. & OMRON Asia Pacific PTE (LTD)

Petroleum Products Technical Seminar PETRON Corporation

Internal Quality Audit Workshop & Seminar Department of Trade & Industry

Organizational Culture and Leadership LICEO de Cagayan University

Executive Briefing on ISO 9000 Department of Trade & Industry

ISO 9000 Documentation Seminar Department of Trade & Industry

Productivity Through Effective Human Relation Cagayan de Oro Chamber of Commerce

Calibration for ISO 9000 Quality Mgt. System NEVILLE CLARKE

Industrial Instrumentation Technology National Manpower & Youth Council, Region 10

In-plant Safety and Health Appraisal Workshop Department of Labor & Employment,

Inter-culturally Competent Communicator LICEO de Cagayan University

MS Office, KBR Documentum, McDermott PIMPS, SPORTS

Sales & Teaching