CV Over 22 years experience various fields in Oil & Gas Piping and Hydro Electric Construction

Resume built for oil and gas job opportunities by a jobseeker with experience in Over 22 years experience various fields in Oil & Gas Piping and Hydro Electric Construction - would you like to offer this candidate a job/contract employment?

CV/Resume ID no.: 127763

Sir ,

I’m applying for Mechanical Engineer / Superintendent Piping / Construction Engineer.

I am a multi skilled engineer which can handle piping, mechanical, civil and structural work and have good computer skills. Focused attention to deliver project on time within budget and to the highest quality and safety possible.

I believe I’m competent to work in your organization. I am energetic and can work well with less supervision and can work on extended hours if the need arises.

Should this be of interest, please feel free to contact me.

Mechanical Engineer October 2011 – January 2012
Mapalimak MNG Holding – General Contractor
Project : Riyadh Water Transmission Line – 350 Kilometer x 44” dia. - USD 300 Million Project
Jubail, K.S.A

Job Description :
 Project Engineering - Review specifications and tender drawings
 Check engineering design for mechanical aspect
 Conduct technical queries to complete documents for submittals

Construction Manager September 27, 2009 – December 21,2010
Al Husam General Contracting
Project : (Oil and Gas) ADCO – UAE State Oil
Abu Dhabi, United Arab Emirates

Job Description :
 Construction of flowline kilometers long ( water injection, oil producer and gas well )
 Piping fabrication for loop manifold, tie in erection, pipe pigging and hydro testing
 Civil, Mechanical installation and Tie in piping for Separator and Oil Heater ( Offshore ) – Japan Oil Company – 3 months
 Check / expedite availability of resources prior and during project implementation
 Regular staff coordination meetings for effective project implementation and constraints
 Planning and scheduling, prepare method statement mechanical and piping installation
 Promotes total safety awareness and quality assurance throughout project execution

Construction Superintendent February 9, 2009 – May 9, 2009
ERSAI – ER Holdings / Saipem ( EPC )
Project : ( Oil & Gas ) Kashagan Oilfield Development
Kazakhstan ( Former Russian Federation )

Job Description :
 Piping erection various sizes of pipelines, valves, fittings and supports - 2 piperacks for load out to offshore, Mechanical punchlist clearing
 Inspection on Isometric, General Arrangement, P & ID drawings to ensure piping installation is done

Resident Construction Engineer April 2007 – May 2008
Booker Tate Ltd. : London, United Kingdom
Project : Guyana Sugar Corporation ( Piping, Vessels and Storage Tanks ) – USD $ 180 Million
Guyana, South America
Job Description :
 Represent Guyana Sugar Corporation as Project Management Team
 Direct reporting to British Construction Manager
 Construction : Area of responsibility - Steam Power House 30 MW , Diesel Plant , 2 Boiler House, Process House, Fuel Oil Storage Tanks, Chemical Water Treatment Plant, Raw Water & Cooling Pump House, Mill
 Regular plantwide site monitor piping installation on piperacks from ½ in. to 64 inches diameter and supports , pressure vessels, storage tanks to ensure compliance with design, plans and specifications.
 Inspect, sign documents for completed pipeline, pressure vessels and storage tanks to facilitate contractors request for progress payments
 Pre-Commissioning : Inspection pressure test for piping , pressure vessels and storage tanks
 Painting and insulation inspection for piping , pressure vessels and storage tanks
 Maintain Company Policy on Quality and Safety on the Job

Piping Engineer February 2005 - September 2006
Chiyoda Petrostar Ltd. – Japan ( EPC )
Project : ( Petrochemical ) [ SABIC - Jubail United Petrochemical - Etylene Plant ] Jubail, Saudi Arabia
Job Description :
 Punch list clearing on piping pressure test packages
 Piperacks piping field erection supervision various sizes of pipelines, valves, fittings and supports
 Supervision / coordinate sub-contractors on 250 Tie – Ins, recommend procedure to increase
productivity, quality & safety at work.
 Review, checking revision of construction drawings such as; Isometric, P&ID, General
Arragement,etc. to ensure latest IFC Drawing (Issued for Construction) for execution

Mechanical Engineer October 02, 2002 - September 2004 General Contractor : Technip - France
Modern Arab Construction Co. Ltd Project : ( Oil and Gas ) KSA State Oil - Saudi Aramco Sulfur Recovery
Riyadh, Saudi Arabia
Job Description :
 Pipeline erection in piperacks diameter from 1/2 to 60 inches
 Prepare piping materials take-off - BOQ
 Prepare as built drawings on modified pipelines

Project : ( Oil and Gas ) KSA State Oil - Saudi Aramco Gas Compression Abqaiq , Saudi Arabia Job Description :
 Assist and prepared 470 piping test packages, test limit, test medium, test pressure
 Mark up P&ID drawing monitoring by highlighting pressure tested lines

Field Engineer September 22, 2001 - March 2002
Whessoe Construction Inc
Project : (300 MW Hydro Electric Plant - USD $15 Million) National Power Corp. – Laguna, Philippines Job Description :
 Steel pipe installed, fit- up, fullwelded 16 – 56 mm thk x 6 meter dia x 1.4 km. long ( 7, 500 tons steel)
 250 mtr long slope steel pipe installed on 60Ί stiff tunnel / rail installed for tunnel access pipe delivery

Superintendent Civil Works September 22, 1999 – September 20, 2001 General Contractor : Raytheon Ebasco Overseas Ltd. ( EPC ) - ( USA )
Asian Construction & Development Corp. Project : 345 MW Hydro Electric Plant ( National Power Corp. ) – Pangasinan, Philippines
USD $ 1.2 Billion Project

Job Description :
 Underground Power House Construction ( Rebar fabrication & placement – 2,500 tons of steel ) - Concrete column 42 units 2.4 meter x 1.2 meter x 50 meter high
 Direct reporting to American Superintendent
 Rebar placement 650 tons x 40mm dia- tunnel inlet 17 meter width x19 meter high - 3 pier structure
 Shell fuel storage tank– 2,000 cu. meters capacity (DFO) 9 meter high x 13.5 meters dia. - 2 units
 East and West Conveyor line 3 km long - concrete foundation construction

Site Engineer September 1997 – August 1998
J. V. Angeles Construction Corporation Project : Overhead rail construction 660 meters long on 40Ί terrain ( Php 90 Million Proj.– 90 manpower )
 400 tons steel super structure erected

Construction Superintendent February 1986 - August 1997 Hydro Electric Development Corporation ( Aboitiz Group of Companies ) – Baguio City, Philippines
Project : Hydro Electric Power Plant Construction and Maintenance
Job Description :
 Operations over all system maintenance–piping, mechanical, civil&structural (10 jobsites hydro plants)
 Engineeering – hydro electric power plant design and estimates - man-hours / materials & equipment
 Construction Structural Power House
 Installation 1.3mtr dia.steel pipes x 1.3 km long on 30Ί slope terrain ( Php 30 Million Proj. - 130 men )
 Construction concrete reservoir ( Php 4.7 Million Proj. – 900 & 480 cu.m. capacity – 60 manpower )
 Installation rotating equipments – 8 units Pelton Turbines, 4 units Induction Motor and pumps
 Installation rotating equipments – 3 units Francis Turbines , 3 units Induction Motor and pumps
 Construction Steel Penstock ( Php 4.5 M Project – 80 manpower)
 Tramlined 62 lgths x 0. 94 meter dia.x 372 meter long steel pipes on 50Ί cliff

Cadet Engineer June 1982 – May 1983
Metaphil Inc. Project : Surigao Nickel Refinery ( Aboitiz Group of Companies ) Philippines

EDUCATION : Date of Birth : May 30, 1960
Bachelor of Science in Mechanical Engineering
University of San Jose Recoletos, Cebu City, Philippines
1977 – 1981

Bachelor of Science in Mechanical Engineering

Computer literate-MSWord, MSExcel, MSAccess, AutoCad 2011

1. Construction cost estimates-BOQ, manhours - piping & civil 1
2. Prepare Mechanical, Piping Construction Method Statements