CV Structural PDMS Designer (17)

Resume built for oil and gas job opportunities by a jobseeker with experience in Structural PDMS Designer (17) - would you like to offer this candidate a job/contract employment?

CV/Resume ID no.: 75033
Last Updated: Monday, June 4, 2007

Good morning,
Sub : Application for the post of Structural PDMS designer.
Ref: oil-offshore-marine website.
I am working as a Structural PDMS designer in Fabricom, Stavanger, Norway for last one year. Presently involved in a brown field job - Valhall redevelopment project. The role is - Modeling, preparing drawings and extract MTO from the model. Reporting to Design supervisor and co-ordinating with Senior engineer and checker.
Total experience is 17 years in both off-shore and on-shore with PDMS and PDS.
I am seeking an oppurtunity to work with you and deliver the quality work with my extent possible capablities.
Ready to attend interview and give reference. One month notice period is required to join.

Experience in Fabricom

Position: PDMS Designer

Period: Joined on 10 July 2006

Position: Working as PDMS designer, responsible for modeling/drawings.

Assignments :

Project : Valhall Redevelopment Project
Client : BP

Activities : Modeling and drawing in PDMS

Scope of the project: Proposing a new platform and removing the old Process Control Platform (PCP). New connecting bridges at higher level and removal of the old bridges.

Modeling and preparing drawings for PCP north and South bridge landing.





Other Experience

Organization: Foster wheeler (I) Private Ltd, Chennai.

Position: Senior Designer

Period: July-2005 To Jun-2006

Position: Working as senior designer/checker, responsible for modeling/drawings.

Assignments :

Project : Eastern Petro chemical Company Sharq Utilities & Offsites, Al jubail Industrial City, Kingdom of Saudi Arabia
Client : SAudi Basic Industries Corporation (SABIC)

Activities : Checking models, drawings, interacting with other department (IDR), Manpower Planning (MPP)

Deputed to Foster Wheeler, UK to understand project scope, review Manpower planning and attend kick off meetings.

Scope of the project includes 2 Compressor sheds, 3 Sub-stations, 3.2 kms of piperack with no. of pipe bridges, boiler foundation, pump shelter, tankfarm bund wall, cross-overs, pump/eqpt foundations. etc.,


Other Experience

Organization: Fluor Daniel (I) Private Ltd, Gurgaon.
A leading company of Fluor Corporation group, USA in the field of Refinery sectors.

Position: Worked as designer/checker, responsible for the detailing of structures on the assigned projects.

Duration : Apr-2004 To Jun-2005

Select Assignments :

OPTI Canada
Modeling & drafting of cooler support & Vessel support in PDS/Microstation.

Sakhalin-1 EPC-1 Project – Chayvo onshore processing facility

Leading a team to prepare MPS/MES & other misc support drawings, checking the same and maintaining corresponding documents (Check prints/ Inter disciplinary check prints), coordinating with piping and electrical dept.

Checking module drawings below deck and equipment support arrangement in both drawings and PDMS models.

Sunoco Inc – Low sulfur Gasoline Unit

Modeling and preparing drawings of steel working platforms,
RCC equipment foundation, pipe support

Reviewing fabrication drawings of three similar refineries (MHK, TOL & PHL) in accordance with Fluor standard drawings and design requirement.


Organization: VALDEL E&C, Bangalore – Company in the field of Oil/Gas, refinery etc & On-shore & Off-shore.

Position: Worked as Designer/Checker, responsible for the design and detailing of structures on the assigned projects.

Duration : May-2003 To Apr-2004

Select Assignments :

Songo Songo Gas Development & Power Generation Project, Tanzania
Checking piperack drawings of all area
Modeling the piperack in PDS.

N9 & N10 Platform, ONGC
Preparing and checking Jacket Drawings – Horizontal framing plan and vertical elevation drawings.

Checking all other jacket related drawings, ie Boat landing, jacket rub strip, mudmat detail drawings, transition piece detail & deck drawings i.e. Cellar deck, main deck framing plan and vertical bracing (truss) drawings & staircase.

Preparing Helideck framing plan, building module and vertical bracing - drawings and details

Modeling the cellar deck, main deck, helideck horizontal framing and vertical bracing, building module, x-mas tree, solar panel & vertical bracing between cellar & main deck and main & helideck.

Modeling jacket horizontal framings and vertical bracings.

CENEX ULSD Hydro Treater Project
Checking Compressor House Architectural & Structural steel design scope drawings, operating platform, pipe support, crane girder drawings.

Cheking piperack drawings – plan elevation/sections including cooler area

Modeling Compressor house, operating platform & piperack in Framework Plus.

Organization: Technip – Coflexip, Abu dhabi

Position: Worked as, Designer responsible for drawings of structures on the assigned projects.

Duration : Oct-2002 TO Apr-2003

Select Assignments :

Saudi ARAMCO
Preparing equipment support drawings.

Dragon Oil, Lam & Zhdnov Field developments, Turkmenistan
Preparing Jacket drawings – elevation, plan. Plan at mudmat level & diff levels. Jacket legs make up & pile make up drawings. Conductor protector, Riser protector arrangement & details. Conductor clamp, riser clamp arrangement and details. Connection between lower and upper jacket and stabbing details. Padeyes arrangement and details.




Organization: Rotary MEC Engg (I) Pvt. Ltd., Bangalore

Position: Worked as, Designer responsible for drawings of structures on the assigned projects.

Duration : Jun-2000 TO Sep-2002

Select Assignments :

Thai Tank Terminal (Thailand), Deputed to Thai Rotary Engg. Ltd, Rayong, Thailand.
Preparation of Layout of Tank foundations, layout of bund wall, Foundation details of tank, pump house, bund wall. Structural details of pump house, gantry girder, crossover platforms etc.

Extension/modification of pipe bridges, support, Extension of jetty platform incl. of surveying existing structure.

Chem1 & 2 for Singapore Oil tanking, Singapore
Involved in preparation of layouts of pipe sleeper, Steel pipe support & Pipe crossings. Nearly 300 pipe sleepers and pipe supports were located after checking the foundation clash with other structures and detailing were done for the same.

Developing and detailing of Substation building, pump house & hose rack area. Cable trench layout detail made for substation building.

Deputed to Rotary, Singapore for doing as built drawings of the above. Site visit & survey for the same.

Ohanet, Algeria (Consultant: ABB-Lummus, Netherland)
Foundation drawings of 8 huge tanks (15m to 30m dia) were done.

Thai Olefins Co./Thai Tank Terminal
Detail drawings and fabrication drawings of Compressor house, Piperack and pipe support.

Indian Oil Corporation Ltd., Navagam
Architectural & RCC/Steel detail drawings for Administration Building, Amenity Building, Truck loading Gantry, Checking and Sealing Gantry, Watch tower etc.,

IDC (Inter Disciplinary Check) of Piping GAD of the plant.



Fabrication drawings for Truck Loading Gantry and Checking & Sealing Gantry.

Organization: John Brown Technologies (I) Pvt. Ltd., Bangalore

Position: Worked as, Senior draughtsman responsible for drawings of structures on the assigned projects.

Duration : Feb-1998 To Apr-2000

Select Assignments :

Panna Field development PH & PJ platforms and pipelines for Enron Oil & Gas (I) Ltd., EOGIL
Involved in preparing Structural steel drawings for Jacket (PJ) horizontal & Vertical framings, Cellar Deck, Main Deck, heli Deck framing plan & solar panel and Fire fighting platform. Drawing for Jacket Up-lifting sequence, Boat landing details, Barge bumper, Adjustable staircase, Deck & Jacket lifting pad eyes etc., are also developed.

Clamp-on Related Modification & Pipeline Project
Client : Mazagon Dock Ltd, owner: ONGC
Involved in preparing Structural support/ modification/ extension detail drawings for Water Injection Manifold, WI launcher and pipe support etc.,

Pre-engineering survey done for 11 unmanned platforms in Bombay High North Oil Field (BHN) and survey reports were prepared for CRMP project.

12 Clamp-on Structures in Bombay High South & Heera Fields
Client : Chchin shipyard Ltd.,/ Great Eastern Shipping Company Ltd , owner: ONGC
Prepared structural steel drawings for Curved/Vertical conductor guide, Conductor protector, Cellar/Main deck extension & conductor make-up length details. Standard drawings for hinge clamp that to be connected to launch truss, and standards for handrail, grating etc.,

Fabrication drawings were also prepared for the same above.




Diesel Hydro Desulphurisation Project (DHDS), HPCL, Vizag.
Client : Larson & Toubro, Baroda,
Owner: Hindustan Petroleum Corporation Ltd.
Involved in the preparation of Civil & RCC detailed drawings like pile foundation and pilecap details, various types of equipment foundation details and Structural design drawings for Technological structure, Compressor house, Crane Girder, equipment platform details, Cleat to support ladder. Estimation of concrete & Steel quantities.

As-built drawings were also done for the above project.

7 clamp-on Structures
Client : Mazagon Dock Ltd.
Owner: ONGC
Involved in structural drawings for Curved/Vertical conductor guide, Conductor protector, at Cellar/Main deck level& different levels below sea water level.

Organization: Paradigm Technologies pvt. Ltd., Chennai

Position: Worked as, CAD designer.

Duration : Dec-1995 To Jan-1998

Select Assignments :

(Deputed to Kvaerner Process (I) Ltd., Bangalore)
Hadeed Iron & Steel Plant module –D, DR plant, Saudi Arabia
Client: Kvaerner Metals, Pittsburgh, USA
Involved in foundation GA and reinforcement details for various tanks & RCC detail drawings for Control building, manhole, Slurry handling and 3-day pond, clarifier etc.

(Deputed to IDEA, Chennai)
APMC-KK4 (Jurong project), malaysia
Involved in steel fabrication drawings for columns, beams etc.,

Other Projects:
RCC structures drawings for:

- Lancer Car Project, Hindustan Motor Corporation.
- Madras Port Trust
- Gujarat Torrent Energy Corporation (deputed to Fitchner (I) Ltd.
- Jaykaypuram paper mills, Seshasayee paper boards & Project consultancy
- 600 MW Diesel Power plant, Al-aweer power Corporation, Dubai, (through Mitsubishi Heavy Industries)

Steel structures drawings for:

- Main factory building, ACD-Ford, Chennai
- Kalyani Hanil projects, Chennai
- Lancer Car Project, Hindustan Motor Corporation


Organization: CADD Unique, Chennai & Siva Constructions, Madurai

Position: Worked as, CAD designer.

Duration :Oct-1990 To Dec-1995

Responsible for various Civil and Structural drawings for residential building, Shopping complex, Theatre etc.

Qualification /
Year of passing
Diploma in civil Engineering
April-1990

PDMS - design and draft
PDS - modeling
Microstation and AutoCAD.
+MS office

Trained in Fire and safety program
Trained in efficient communication
Jacket modeling, curved conductor supports etc.