CV PDMS Piping Designer Worley Parsons Melbourne Australia Vetco Aibel Haugesund Norway Foster Wheeler

Resume built for oil and gas job opportunities by a jobseeker with experience in PDMS Piping Designer Worley Parsons Melbourne Australia Vetco Aibel Haugesund Norway Foster Wheeler - would you like to offer this candidate a job/contract employment?

CV/Resume ID no.: 75070
Last Updated: Friday, September 11, 2009

Had a total of almost 15 years experience in oil and gas/ petrochemical and refinery plants. 11 years experience as a PDS Piping Designer. Jobs includes the application of standard design principles and theories to complete the assignment. Understands and performs changes, additions and/or revisions as required. And performs other duties and responsibilities associated with positioned as may be appropriate.

Computer literate with Microsoft offices 95/97/2000 edition, Windows 95/97/2000 edition, Autocad 2000I,2004, Microstation 95, SE & J, Perform Pipe layout using 3D modeling Intergraph Plant Design System (PDS) Equipment Modeling and Frameworks ,Isometric Extraction and General Arrangement Drawing Extraction and Annotation. Auto Plant 2D
P&ID Intelligent ( Rebis ) Autocad 200I base Program. Smart Plant Viewer. 3D CADView.

EMPLOYMENT HISTORY:

Worley Parsons Melbourne October 2006- Present
333 Collins St. Melbourne
Victoria, Australia


PDMS PIPING DESIGNER (May 2007 - Present)
Work Description :

Responsible for Equipment modeling and Piping lay-out for Fire Water System
Extraction of Isometric using Isodraft

Project Involvement :
Turrum Development Project (Phase 2)
(Client : Esso Australia Pty., Ltd.)


SENIOR PIPING DESIGNER (Oct. 2006 – April 2007)
Work Description :

Performs Piping Design using the PDS Intergraph software
Extraction, annotation and back drafting of Piping Isometric Drawings
Performs site design work and produce IFC Piping Isometric Drawings
Provide and locate preliminary pipe supports as a guide for Structural group

Project Involvement :
•Front Puffin FPSO Conversion Project
(Client : Sea Production / Frontline FPSO Pty. Ltd.)


Vetco Aibel Corporation June 2006-Oct. 2006
Haugesund Branch,
Norway


PDS PIPING DESIGN ENGINEER

PDS Piping Designer Statoil Revamp and Rejuvenation Project in Karsto

Duties and Responsibilities include Piping Lay-out for Horizontal Separator, Replacement of Piping for Compressor, Extraction of isometrics using 3D Plant Design System (PDS). Perform pre-design site survey for pipe routing.


Foster Wheeler International Corporation Sept. 2005-April 2006
Thailand Branch Office,
217 Moo 12,Sukaphiban 8 Rd.,Tungsukla, Sriracha,
Chonburi, 20230 Thailand

PDS PIPING DESIGN ENGINEER

PDS Piping Designer for Dehydration Area

Perform pipe routing design and other miscellaneous required for piping design development.
Check, review and comment on drawings in accordance with project specifications and P&ID.
Perform 3D (PDS) modeling works, detail design, 3D model review (SPR), clash check, isometric extraction.


Foster Wheeler and Bayer Technology Services Apr. 2005-July 2005
Block F3,Muhua Road,
Shanghai Chemical Industry Park
201507, Shanghai,P.R. China


PDS PIPING DESIGNER

PDS Piping Designer for Bayer Coalings HDI4 Plant Caojing China

Perform pipe routing design and other miscellaneous required for piping design development for Production Process Area of Phosgene Generation (Gas Mixing and Reaction),Phosgene Absorption and Phosgene Desorption.
Check, review and comment on drawings in accordance with project specifications and P&ID.
Perform 3D (PDS) modeling works, detail design, 3D model review (SPR), clash check, isometric extraction.


Bechtel, Sinopec and Foster Wheeler (BSF) Oct. 2004-March 2005
Auto Anhui Bldg. Daya Bay Huizhou
Guandong,P.R.China


PDS PIPING DESIGNER

PDS Piping Designer for CSPC NANHAI PETROCHEMICALS PROJECT

Duties and Responsibilities include Piping Lay-out for General Facilities Area specially for Low Pressure Burner ,Custody Meter,Slops,Truck Loading and Piping Lay-out of all utility and small bore piping for Tank Farm Area using 3D PDS Intergraph. Also Performs isometric extraction using the same 3 dimensional tool . Review works using Smart Plant Viewer.



Technip Tianchen Chemical Engineering June 2004-Sept. 2004
(Tianjin) Co.,LTD Shanghai,P.R. China


SENIOR PDS PIPING DESIGNER


Senior PDS Piping Designer for CSPC NANHAI PETROCHEMICALS PROJECT
(MPG and POLYOILS PROJECT)

Duties and Responsibilities include Piping Lay-out, Back drafting and Checking of isometrics using 3D Plant Design System (PDS).Provide and locate support as per standard. Performs isometric extraction using the same 3 dimensional tool. Review works using Smart Plant Viewer.


Technip Geoproduction SDN. BHD.(79917-X) March 2004-May 2004
Kuala Lumpur, Malaysia


SENIOR PDS PIPING DESIGNER
Senior PDS Piping Designer for CSPC NANHAI PETROCHEMICALS PROJECT
(SMPO PROJECT)

Performs 3D piping lay-out and support modeling using Intergraph 3D Plant Design System (PDS), also performs isometric extraction using the same 3 dimensional tool.responsible for the areas assigned to perform the necessary needed output by the client. Review works using Smart Plant Viewer.


SUMATEC CORPORATION August 2003-Feb.2004
Kuala Lumpur, Malaysia


SENIOR PIPING DESIGNER

Sumatec Corporation., Kuala Terengganu, Malaysia as Senior Piping Designer for ET1&2,GPP1 Rejuv Project for the Petronas Gas Berhad Onshore Project. Duties include pipe routing, pipe support locations and installation of tie in points for the replacements of valve, instrument connections and pipe..Manual Isometric sketch based on General Arrangement Drawing and includes Material Take-off of all piping parts.Preparation of General Arrangement Drawing using Autocad 2004 .



FLUOR DANIEL INC, PHILIPPINES
3rd Flr. Asian Star Bldg. Asean Drive
Filinvest Corporate City, Alabang
Muntinlupa, Philippines

SENIOR PDS PIPING DESIGNER Oct. 2001 – Aug 2003

Job Description:

Performs 3D piping and equipment modeling using Intergraph 3D Plant Design System (PDS), also performs isometric extraction using the same 3 dimensional tool, responsible for the areas assigned to perform the necessary needed output by the client. Check, back checks and correct compute drawings and isometrics. Check other departments’ design drawings and suppliers equipment drawings. Update master flow diagram. Duties also include production of General Arrangement Drawings using PDS as required by the client as deliverables. Duties and responsibilities includes to train fellow pipers the use of 3D piping and equipment modeling, and ensure that all trainees are capable of performing the 3D layout before assigning to a project and given a certain area, assist and develop work group members, particularly designer level and below. Supervise 3 to 4 personnel as an Area Supervisor. Assess and monitor the group progress and report to supervisor, as required and functions of designers. Revision of Piping & Intrument Diagram using Auto Plant 2D P&ID Intelligent Autocad 2000I base program. During this period we also attended Designer Enhancement training to further develop our capabilities as designer. Review designers works using Smart Plant Viewer
Project Involved:

Petrolera Ameriven
Hamaca Crude Upgrade Project
Sulfur Recovery Area, Venezuela


Conoco Low Sulfur Gasoline Project
Ponca City, Oklahama (USA)


Lyondell- Citgo Refining, LP Tier II Compliance Project
Houston,Texas(USA)


Marathon Ashland Petroleum LLC
Houston,Texas(USA)


FLUOR DANIEL
#1 Fluor Daniel Dr.
Sugarland, Houston Texas
U.S.A.



SENIOR PDS PIPING DESIGNER (ON ASSIGNMENT) Feb. 2002 – May 2002

- assigned to Houston office to do the FRONT END engineering using 3D PDS Intergraph piping layout model and equipment modeling for the Conoco Low Sulfur Refinery in Oklahoma .Work as an Area Lead Supervisor.


CHIYODA & EEI CORPORATION

DESIGN ENGINEER III Sept. 1995– Oct 2001

Job Description:

Performs 3D PDS piping lay-out using specifications, standard drawings, design instruction, plot plan, flow diagrams, line list and suppliers information. Draw and update stress sketches. Communicate and interfaces with other project design and engineering disciplines. Develops 3D PDS piping and equipment model also includes modelling of Structural using PDS Intergraph. Complete computer drawings and isometrics. Perform manual Isometric and Piping Layout.


CHIYODA CORPORATION
YOKOHAMA,JAPAN

PDS PIPING DESIGNER (ON ASSIGNMENT) Nov. 1996-May, 1998

- assigned in Chiyoda Japan office to have a training for 3D PDS Intergraph piping layout,equipment modeling and Microstation. Involved in 2 major projects by Chiyoda. Performs 3D piping and equipment modeling using Intergraph 3D Plant Design System (PDS), also performs isometric extraction using the same 3 dimensional tool, responsible for the areas assigned to perform the necessary needed output by the client. Duties also include production of General Arrangement Drawings using PDS as required by the client as deliverables.

Projects Involved:

- SAY PROJECT- SAUDI AROMATICS YANBU
- SCP PROJECT- SAUDI CHEVRON PROJECT
- SSP PROJECT- EASTERN PETRO CHEMICALS
- CSL PROJECT- PULAO ULAR SINGAPORE
- QGL PROJECT- QATAR GAS LNG
- PSR PROJECT- PETRONAS SECOND REFINERY
- JEP PROJECT- MARIVELES BATAAN (SITE ENGINEERING)
- TPS3 PROJECT- TEIJIN POLYCARBONATE SINGAPORE PTE, LTD.

MAPUA INSTITTUTE OF TECHNOLOGY
Bachelor of Science in Mechanical Engineering
C&E Training Room – Pasig City, Philippines a. Piping Flexibility Analysis, Feb. 2000
Chiyoda Corporation – Yokohama,Japan b. PDS Intergraph and Microstation 95, October 1996
EEI Corporation Training Center – Quezon City, Philippines c. Autocad R13 Update Training, July 1996
C&E Corporation – Pasig City, Philippines d. Professionalism at Work, May 1996
Fluor Daniel Inc., Phils.- e. Design Enhancement Training, Nov. 11~22, 2001

Plant Design System (PDS)
Plant Design Management System (PDMS) 11.6 SP2
Microstation
Smartplant Viewer
Knowledge inAutocad
P&ID Intelligent (Rebis) Autocad base Program.

Pipe Support Designer (PDS)
Frame works (PDS)