CV Snr Drilling Engineer/Op

Resume built for oil and gas job opportunities by a jobseeker with experience in Snr Drilling Engineer/Op - would you like to offer this candidate a job/contract employment?

CV/Resume ID no.: 75079

Dear Sir,

I work with ENI exploration & production since 1979. I have long experience in drilling and materials activity and I work for several time in West Africa.
For drilling engineer degree I do my school in ENI University in Milan.

Actually I’m in head office in Milan in new assignment to follow all west Africa business, but I want to go back to Africa and work on operations

I’m married with an Angolan citizen (my wife have European passport and Angola passport) and I have one daughter that is 4 years old.

For these reason I’m looking for a resident position (with family could be better)

If your Company think that we can have a discussion, I’m available from now

Also I can work resident without family (as per company policy requirement)

09/2006 – PRESENT
ENI E. & P. , HEAD OFFICE, MILAN, ITALY
SENIOR DRILLING ENGINEER/OPERATIONS

Responsibilities include:
• Prepare drilling programme for different Area
• Follow Operations
• Prepare decommissioning programme for Congo offshore activity
• Participate to Service Company presentation regarding new technology
• Participate at general working group.
• Prepare AFE
• Follow operation in west Africa

[Refer to Appendix for a detailed history of technical experience.]


02/2004 – 08/2006
NAOC – NIGERIAN AGIP OIL COMPANY, PORT HARCOURT
SENIOR DRILLING ENGINEER

Responsibilities include:
• Follow daily drilling operations (swamp, land)
• Prepare bid, scoring model, final evaluation
• Supervision of waste management in line with local regulations
• Follow cost control (accrual) & prepare AFE for each well
• Participate at daily morning operation meeting with production, exploration,reservoire,transport.
• Participate to a critical operation/situation on rig site
• Prepare HSE/ENI report to partner
• Member of NAE/ENI group for deep water bid evaluation service company
• Support completion/work over department following operations
• Prepare list of materials for drilling activity
• Monthly meeting with Local Government Authority (NAPIMS)
• Save 15% cost as per previous year


01/2004 – 02/2004
ENI E. & P. , HEAD OFFICE, MILAN, ITALY
SENIOR DRILLING ENGINEER

Responsibilities included:
• Prepare drilling programme for different Area
• Follow Operations
• Participate to Service Company presentation regarding new technology
• Participate at general working group.
• Prepare AFE
• Working group for review of Best Practices procedure


08/2000 – 12/2003
ENI ANGOLA EXPLORATION, LUANDA
SENIOR DRILLING ENGINEER

Responsibilities included:
• Following deep water drilling activity with Saipem 10K and Pride Angola drilling sheep on Block 25 offshore at 1600 meter water depth.
• Use new ENI technology like Lean Profile, SDD Baker/Agip, Dual Casing running job
• Prepare, AFE & follow daily cost, accrual and cost control.
• Prepare with procurement department all bid, specification, evaluation, scoring model for all service contract company, including rig, supply vessel, helicopter, base.
• Check and authorize payment to all invoice regarding complete activity
• Several meeting with local Government Authority (SONANGOL)
• Work in farm out with Total for Pride Angola drilling ship.
• Take care of logistic base, in therms of materials, offload on load and shipping manifest according with local custom authority.
• Apply Best Practices and minimum requirement as per ENI procedure
• Cover Drilling Manager position when was out
• On board of drilling ship to supervise operation and performance
• Save 22% of cost

01/1999 – 07/2000
ENI TUNISIA B.V., TUNIS
SENIOR DRILLING ENGINEER

Responsibilities include:
• Prepare drilling programme for desert activity
• Prepare with procurement department all bid, specification, evaluation, scoring model for all service contract company, including rig,
• Follow Operations
• Several meeting with local Government Authority (ETAP)
• Prepare AFE
• Use new ENI technology like Lean Profile, SDD Baker/Agip, Dual Casing running job
• Apply Best Practices and minimum requirement as per ENI procedure
• Cover Drilling Manager position when was out
• On rig site to supervise operation and performance
• Save 9% of cost


07/1998 – 12/1998
ENI E. & P. , HEAD OFFICE, MILAN, ITALY
SENIOR DRILLING ENGINEER

Responsibilities included:
• Prepare drilling programme for different Area
• Follow Operations
• Participate to Service Company presentation regarding new technology
• Participate at general working group.
• Prepare AFE
• Working group for review of Best Practices procedure
• Mission to Gabon on board of semi sub


11/1997 – 06/1998
ENI E. & P. , HEAD OFFICE, MILAN, ITALY
SENIOR DRILLING ENGINEER

Responsibilities included:
• Company Technical school on drilling & completion engineering technology c/o ENI Corporate University in Milan

03/1997 – 10/1997
ENI E. & P. , HEAD OFFICE, MILAN, ITALY
JUNIOR DRILLING ENGINEER

Responsibilities include:
• Prepare drilling programme for different Area
• Follow Operations
• Participate to Service Company presentation regarding new technology
• Participate at general working group.
• Prepare AFE
• Working group for review of Best Practices procedure
• Following new coiled tubing drilling technology sud of Italy, on rig site
• Mission to Baku (Azerbaijan) on board of semi sub rig for gumbo shale problem
• During this time went to three different area (two Italian and one Egypt) for internal technical audit


04/1995 – 03/1997
ENI CONGO S.A., POINTE NOIRE, CONGO
SENIOR FLUID & CEMENTING ENGINEER

Responsibilities included:
• Mud Supervisor on board of semi sub rig following drilling & completion activity to develop Kitina field, offshore Congo.
• Prepare, AFE & follow daily cost, accrual and cost control.
• Prepare with procurement department all bid, specification, evaluation, scoring model for all service contract company, for mud, cementing, solids control and waste management.
• Check and authorize payment to all invoice
• Several meeting with local Government Authority
• Take care of logistic base, in therms of materials, offload on load and shipping manifest according with local custom authority.
• Apply Best Practices and minimum requirement as per ENI procedure


10/1994 – 03/1995
ENI PETROLEUM EXPLORATION CO. INC.,GULF OF MEXICO, USA
SENIOR FLUID & CEMENTING ENGINEER

Responsibilities include:
• Mud Supervisor on board of semi sub and fixed rig following drilling & completion activity in charge for fluid, cementing waste. Leak off test.
• Follow Operations
• Participate to several meeting on board with local Authority (MMS/USA)
• Participate at general working group.
• Working group for review of Best Practices procedure


03/1992 – 09/1994
NAOC – NIGERIAN AGIP OIL COMPANY, PORT HARCOURT
SENIOR FLUID & CEMENTING ENGINEER

Responsibilities include:
• Mud Supervisor follow daily drilling operations (swamp, land) on board of rigs
• Prepare bid, scoring model, final evaluation
• Supervision of waste management in line with local regulations
• Follow cost control (accrual) & prepare AFE for each well
• Participate at daily morning operation meeting with production, exploration,reservoire,transport.
• Participate to a critical operation/situation on rig site
• Prepare HSE/ENI report to partner
• Support completion/work over department following operations
• Monthly meeting with Local Government Authority (NAPIMS)
• Member of “Emergency Team” for blow out of Ebegoro field. Operated also with snubbing unit and Wild Well Company to control overpressure. Use heave mud (2.5 kg/l)


09/1991 – 02/1992
ENI E. & P. , HEAD OFFICE, MILAN, ITALY
SENIOR FLUID & CEMENTING ENGINEER

Responsibilities include:
• Prepare mud & cementing programme for different Area
• Follow Operations
• Participate to Service Company presentation regarding new technology
• Participate at general working group.
• Prepare AFE
• Working group for review of Best Practices procedure
• Several mission to Adriatic see offshore on board or rigs


01/1991– 08/1991
ENI E. & P. , NORD ITALY DISTRICT OFFICE,CREMA
SENIOR FLUID & CEMENTING ENGINEER

Responsibilities include:
• Prepare mud & cementing programme for different Area
• Mud Supervisor on rig site
• Participate to Service Company presentation regarding new technology
• Participate at general working group.
• Prepare AFE
• Working group for review of Best Practices procedure
• Mission to NAOC Nigeria –Agbara field - on board of fixed production platform for gumbo s


01/1989– 12/1990
ENI E. & P. , NORD ITALY DISTRICT OFFICE,CREMA
JUNIOR FLUID & CEMENTING ENGINEER

Responsibilities include:
• Mud Supervisor on po valley rig side to deep well and HP/HT/well. This time reach
• A deeper well as per 7000 m
• Participate to Service Company presentation regarding new technology
• Working group for review of Best Practices procedure

06/1988– 12/1988
ENI E. & P. , OFFICE, MILAN, ITALY
JUNIOR FLUID & CEMENTING ENGINEER

Responsibilities include:
• Company Technical school on drilling & fluid cementing engineering technology c/o ENI Corporate University in Milan


04/1979– 05/1988
ENI E. & P. , MU LAB, MILAN, ITALY
CHEMICALS FLUID & PRODUCTS ANALYST

Responsibilities include:
• In charge of all analysis for chemicals, mud, barite, bentonite, polymer as per OCMA & API procedure and spec.
• Teacher to ENI Corporate school centre for mud engineer following all lab equipment

1988 School for Fluid & Cementing engineer
1989 English School – Berlitz – Milan, Italy
1992 School for H2S – Stop & Security – Milan, Italy
1992 IWCF certificate ENI school, Milan, Italy
1993 School of solids control – Scota Centre - Aberdeen
1994 Stuck Pipe preventer – Randy Smith Drilling service, Lafayette, USA
1997 ENI School for a special position “Sorvegliante” – Milan, Italy
1997 ENI School for Drilling & Completion Engineer, Milan, Italy
1998 IWCF certificate ENI school, Milan, Italy
1999 Training to Baker Hughes PDC/Rock BIT manufacturing, Houston, Texas
2007 IWCF well control certificate

INDUSTRY REQUIRED
1998 Offshore Survival Training Course, APT Pavia, Italy
1998 Offshore Fire fighting Course, APT Pavia, Italy

SOFTWARE TRAINING
2000 Landmark package
All system available today (World, Excel, etc.)

All system available today (World, Excel, etc.)

IWCF certificate valid till 01-03-2009
Offshore Survival certificate