CV PDS, PlantSpace, PSDS-Bentley, Piping Designer

Resume built for oil and gas job opportunities by a jobseeker with experience in PDS, PlantSpace, PSDS-Bentley, Piping Designer - would you like to offer this candidate a job/contract employment?

CV/Resume ID no.: 75091
Last Updated: Friday, May 9, 2008

•Almost twelve (12) years professional experience in the field of Piping Design and Engineering that includes oil and gas, refinery, petrochemical, FPSO, specialty chemical, oleo-chemical, pharmaceutical, power and water reclamation projects.
•Proficient with the use of several 3D Design software’s such as Plant Design System (PDS-Intergraph), PlantSpace Design Series (PSDS-Bentley) and the Bentley AutoPlant 2004 software.
•Able to perform PDS Administration and PSDS-Bentley Database Administration.
•Able to perform site design work.
•Almost 7 months experience as Material Controller at site using the FMCS software.
•Works effectively where interfacing with other discipline is required.
•Deal with projects carefully, efficiently and has a positive approach with regards to problem solving.
•Ability to fit-in while working with different kinds of people and handles pressure patiently.

1.Company Name :Worley Parsons (Melbourne, Australia) through Bayside Personnel
Position Title :Senior Piping Designer
Date Joined :05 December 2006 Date Left :
Work Description :
•Performs Piping Design using the PDS Intergraph software.
•Extraction, annotation and back drafting of Piping Isometric Drawings.
•Performs site design work and produce IFC Piping Isometric Drawings.
•Design and locate preliminary pipe supports as a guide for structural group.
Project Involvement :
•Front Puffin FPSO Conversion Project, Client: Sea Production / Frontline FPSO Pty Ltd

2.Company Name :Jacobs Engineering, Singapore
Position Title :Piping Designer
Date Joined :01 March 2006 Date Left : 01 December 2006
Work Description :
•Responsible for the Preliminary Equipment Layout to be issued for review and approval.
•Responsible for the Piping Route Design based on P&ID’s and standards.
•Generation of Equipment and Piping General Arrangement Drawings.
•Inter Discipline Coordination.
Project Involvement :
•Abbott Nutrition International, Singapore Capacity Expansion Project, Client: Abbott

3.Company Name :Alstom Power (Sydney, Australia) through Bayside Personnel
Position Title :Industrial Designer
Date Joined :06 June 2005 Date Left : 15 December 2005
Work Description :
•Performs Piping Design using the Bentley AutoPlant 2004 software.
• Generation of Equipment and Piping General Arrangement Drawings.
• Extraction of Piping Isometric Drawings using AutoIsogen.
• Performs Design Review using Bentley Navigator.
• Inter Discipline Coordination.
Project Involvement :
• Alcan Balance of Plant (BOP) Project, Client: Alcan

4.Company Name :Keppel Engineering Pte Ltd, Singapore
Position Title :Project Engineer (PSDS Designer/Database Administrator)
Date Joined :01 August 2003 Date Left : 08 April 2005
Work Description :
• Prepares the PlantSpace Database according to project specifications.
• Performs design using the PlantSpace Design Series software.
• Extraction of Piping Isometric Drawings using AutoIsogen.
• Customization of Piping Components for PlantSpace 3D Modeling.
Project Involvement :
• Changi Water Reclamation Plant (CWRP Project), Client: CH2M Hill

5.Company Name :EC Chemical Technologies Pte Ltd, Singapore
Position Title :PDS Piping Engineer
Date Joined :02 July 2001 Date Left : 23 July 2003
Work Description :
• Responsible for the Project Creation, Project Set-Up and PDS Administration.
• Prepares the PCD files according to project specifications and load them on the PDS.
• Piping route design, equipment modeling, structure modeling and raceway modeling using the PDS software.
• Extraction and annotation of the Equipment and Piping General Arrangement Drawings.
• Extraction of Piping Isometric Drawings.
• Pipe Support design based on standards.
• Responsible for operating the Design Review during engineering review and presentation.
Project Involvement :
• Hydrogenation Plant (MIRAI Project), Client: Teijin Twaron, Netherlands
• Specialty Ester Manufacturing Plant (RIKEVITA Project), Client: Rikevita (M) Sdn Bhd
• Modular EC Chem Jet Reactor (SCIENCE TECHNICS), Client: Science Technics

6.Company Name :Chiyoda & EEI Corporation, Philippines
Position Title :PDS Design Engineer
Date Joined :September 1995 Date Left : June 2001
Work Description :
• Responsible for the 3D Modeling of all the piping, equipment, structures and raceways using the PDS software.
• Extraction and annotation of the Equipment and Piping General Arrangement Drawings.
• Extraction and annotation of Piping Isometric Drawings using AutoIsogen.
• 3D Modeling using Autoplant software in previous projects.
• 2D Drawing using Autocad software in previous projects.
Overseas Assignment :
Feb. 2000 – Sept. 2000 Kellogg Overseas Corp. – Chiyoda Corp. Joint Venture, Singapore
Material Controller/Piping Inspector
•SOP (Singapore Olefins Project), Client: Exxon
June 1996 – June 1998 Chiyoda Corporation, Yokohama Japan
PDS Designer
•QMM Project, Client: Qatar Fuel Additives Company Ltd
•SAY Project, Client: Arabian Industrial Fibers Company
Domestic Assignment : C & E Corporation, Philippines
PDS Design Engineer
•OLG Project, Client: Oman Liquified Company
•SSP Project, Client: Eastern Petrochemical Company
•PSR-2 Project, Client: Melaka Refinery
•QGL-3 Project, Client: Qatar Liquified Gas Co Ltd

Training: Location
•PDS Intergraph Modules & Microstation Training: Chiyoda Corporation, Yokohama Japan
•PDS Administration Training: EC Chemical Technologies Conference Room, Singapore
•PDS P&ID Training: PDS Intergraph, Singapore
•PlantSpace Design Series User Training: Bentley Systems, Singapore
•PlantSpace Design Series Admin Training: Bentley Systems, Singapore
•Building Information Modeling Seminar: Bentley Systems, Singapore
•Detailed Piping Design and Engineering in accordance to the Association for Overseas Technical Scholarship: C & E Corporation Training Center, Philippines
•Computer Aided Design: C & E Corporation Training Center, Philippines
•Autocad R13 Training: C & E Corporation Training Center, Philippines
•Autoplant ’97 Training: C & E Corporation Training Center, Philippines
•Professionalism at Work: C & E Corporation Training Center, Philippines
•Bentley AutoPlant 2004: Alstom Power, Sydney Australia

Skill, Years of Exp., Proficiency
PDS Intergraph Modules, 8 yrs, Advanced
PDS Administration, 1 yr, Intermediate
Bentley AutoPlant 2004, 5 months, Advanced
PlantSpace Bentley Modules, 1-1/2 yrs, Advanced
PlantSpace Database Administration, 1-1/2 yrs, Intermediate
Microstation, 8 yrs, Advanced
AutoPlant ‘97, 10 months, Intermediate
AutoCad R13, 1 yr, Intermediate
AutoCad 2005, 6 months, Intermediate

Microsoft Office