CV Sr Pipeline Engineer in oil and Gas field with 13 years Experience

Resume built for oil and gas job opportunities by a jobseeker with experience in Sr Pipeline Engineer in oil and Gas field with 13 years Experience - would you like to offer this candidate a job/contract employment?

CV/Resume ID no.: 75114
Last Updated: Thursday, September 6, 2007

Dear,

For the past 13 years my career with ONGC, CPCL, KSC, TOTAL and ADNOC has focused on offshore oil and gas production operations and LNG storage tank construction in India and Middle East, now I am working as a Senior Engineer of the Total E & P oil field located in Republic of Yemen.

As a Senior Engineer, my goals were to achieve success through visible commitment, strong leadership, effective communications and energetic management. This was achieved through the formulation and implementation of procedures, programs and initiatives, a team effort, continuous communications and the provision of timely and appropriate support.

As a Senior Engineer, I managed and scheduled all the activities associated with the inspection and installation of piping and oil field associated equipment’s also established an effective HSE culture, by a Safety Management Process.

My responsibilities also involved liaison with government officials and local companies in the construction and commissioning phase of a project, which directly contributed to a recognized world-class environmental performance in all aspects of the operation.

My strengths in both my flexibility and task focus, combined with the ability to communicate and work with people at all levels in their efforts to attain challenging and realistic performance targets.

Currently I am looking for oil and gas industry operations or project work either in Asia or Europe region. The attached résumé provides further information about my industry background and highlights additional accomplishments.

Thanks for your consideration.

TOTAL
TOTAL E & P YEMEN
SENIOR ENGINEER (PIPING/PIPELINES) / JUN 2005 – TILL WORKING

• Familiar with Exploration and Production of Central Process Unit operation procedures and job safety analysis.
• Coordination with the Drilling Department RSES and participation of each level in HSE related matters.
• Managed and taken part in Drilling ,Production and Construction SIMPOS in Oil & Gas Field
• Providing inspection of the plant to verify that erected facilities conforms to Flow diagrams, Construction drawing, P&ID and Specifications.
• Preparation of Shutdown execution package, Method statement, Shutdown job card, Test procedures.
• Engineer In charge of Gas Compression Project all Construction activities related to Piping fabrication, Erection, Construction conformity surveillance.


TECHNIP ITALY S.p.A

ABU DHABI OIL REFINING COMPANY (TAKREER)

UNLEADED GASOLINE/LOW SULPHER GAS OIL PROJECT (ULG/ LSGO) /

Jan 2004 – Mar. 2005

Project Engineer (Piping / Pipelines )

• As a Project Engineer for the jetty pipeline and jetty terminal berth work, loading and unloading terminal pipeline works. Feasibility studies involved and abandoned the existing pipeline for the new ones.

• Worked with in-house design and structural engineers. Reviewed drawings prior to submission to classification society for approval.

• Hook up and commissioning of the production platform and pipelines.

• Provided engineering support for onshore development drilling and offshore exploratory drilling operations.
• Prepared technical documentation and procedural guidelines,
• Performed design and analysis for offshore and subsea structures and pipelines,
• Reviewed contracts, specifications, design, materials, equipment & instrumentation,
• Prepared proposals for design and construction projects,
• Crude oil and gas production operations experience encompasses onshore, offshore, pipeline, flowline, and downhole applications for both sweet and sour production.

• Take projects through Mechanical completion to pre-start up condition.
• Relevant Experience in ISO Qualify management systems and well familiarised with latest Quality version ISO 9000: 2000 series
• Coordination with the Construction Contractor for the erection of the steel structure, pipe rack and ethylene heater casing, insulation and piping.
• Ensure that the work is done within the budgeted man-hours and time schedule.



BRIDGE & ROOF Co. (INDIA) LTD. Jan 2001 – Dec. 2003

CAUVERY BASIN REFINERY (CPCL) PROJECT / Project Engineer (Piping/Pipelines)
• Preparation of Tie in packages making necessary planning and execution for Tie-ins and hot tapping.
• Controlling Piping erection operation and Pipe Support installation in accordance with schedule, procedures, specification, priorities, and construction drawings.
• Preparation and Closure of Punch lists for project work completion of plant or various areas, systems and facilities of the plant.
• Major Shut Down Works
• Gas treating units.
• Separation and condensate stabilization unit.
• Sulfur recovery unit.
• Plant utility.
• Engineer in charge for refinery shut down works and for piping fabrication, Erection, Punching, Testing, and Pre commissioning activities.
• In charge for Installation, Pre Commissioning, Commissioning of Chemical feed System for condensate Processing Units.


DAELIM ENGG CO LTD - KUWAIT January 1997 – Dec 2000

GC-25 PROJECT - KUWAIT OIL COMPANY (KSC) / Project Engineer (Piping/Pipelines)

 Design and establish a detailed project plan based on physically measurable quantities of work

 Provide status and data by way of reports on a weekly basis / daily basis to the Project team for their analysis of Overall project status.

 Monitor the physical progress and the cost profile of the Project by comparing planned versus actual and anticipates any potential problems such as late completion of the projects or overruns of the Project Budget.

 Oversee the quantity surveying work and provide timely advice to the project team for the schedule impact of additional work.

 Control and co-ordinate all work processes in shop and onboard.

 Study of detail drawings for fabrication and construction. Co-ordinate with engineering team on the various design aspects of detailed engineering and as built drawings.

 Develop specifications, prepare material requirements, and procure required materials for fabrication & installation of the piping systems.


GULF ENGINEERS AND CONSTRUCTORS (P) LTD – INDIA. Jun 1995 – Dec 1996

GROUP GATHERING STATION (GGS) PROJECT / PROJECT ENGINEER (PIPING/PIPELINES)

 Fabrication, Handling, Installation of Process and Utility Piping, Pipe support, Equipment Erection, system testing & Pre commissioning works.

 Preparation of Test packs Method Statements for piping works, System walk-down and Punching for Mechanical completion.

 Co-ordination with Engineering department, Insulation, Painting, Instrumentation, Electrical during the process of construction and for the completion of the mechanical package (MCC).

 Monitor and Review the activities to ensure that applicable codes, standards, and procedures are being followed to meet quality goals.

 Field Traceability Control of fabrication assembly and installation, documentation verifying that correct material identification/utilization has been made.

 Post fabricated testing of process and utility pressure piping systems, in order to ensure piping system integrity and reliability, as well as to attain consistency in the pressure testing process.

 Punch listing, Testing, Pre commissioning and commissioning of piping systems

 Co-ordinate and liaison with other depts. for inter-trade assistance issues. Co-ordinate and liaison with Project team for client and other third party issues.


GOPEC ENGINEERING (P) LTD - INDIA June 1994 – May 1995

ADKM 01 – ADKM 09 PROJECT (ONGC) / Trainee Engineer (Project)

 Responsible for Plant's Piping Fabrication and Installation, Aboveground Piping/Mechanical Revamping Works, Clients/ subcontractors Coordination.

 Preparing Field modification sketches, Manpower report, as built drawings; Test packages by system, Line check Reports, System Punching.

 Preparation of project documentation and inspection reports.

 Prior inspection for installation of piping & equipment such us civil foundation, steel structural and ensuring equipment location and orientation.

 Preparing tender, Planning.

Engineering: Master Degree in Mechanical Engineering.

Computer: Primavera (P3), SAP, MS Office, and PGDCA & AutoCAD

HSE: Senior First Aid Certificate.

University: Annamalai, Annamalai Nagar, India.

Computer: Primavera (P3), SAP, MS Office, and PGDCA & AutoCAD

Over 13 years experience in the Petrochemical oil and gas industry. Skilled in all activities associated with construction and Safety Management procedures. Known for my strong leadership, energetic management style, and ability to communicate with and lead multi-disciplined teams to achieve challenging performance goals. Preparation of proposals and project plans. Proven structural design ability in FEED to fabrication, construction, commissioning of LNG trains, FPSO`s, offshore platforms, E & P, petrochemical plants with a demonstrated ability to lead multicultural design teams.