CV PDMS Piping Designer

Resume built for oil and gas job opportunities by a jobseeker with experience in PDMS Piping Designer - would you like to offer this candidate a job/contract employment?

CV/Resume ID no.: 75121
Last Updated: Thursday, July 26, 2007

TOTAL EXPERIENCE : MORE THAN 16 YEARS

TOTAL PIPING EXPERIENCE : AKER KVAERNER NORWAY (deputation) - 1 Year
KVAERNER POWERGAS MUMBAI - 5 Years
TECHNIP INDIA LTD - 1 1/2 Year
MARCON ENGINEERS - 4 Years
CCC- ABUDHABI, UAE - 1 1/2 Year
L & T – MUMBAI - 1/2 Year
SADRA CONSTUCTION IRAN - 1/2 Year
INDICOS COMPUTERS-MUMBAI - 2 Year

DETAILED PROFESSIONAL EXPERIENCE

CURRENT EXPERIENCE :


 Working with M/s. Aker Kvaerner Powergas Pvt. Ltd. as a Piping PDMS Designer from 2004 to till date

Project Worked on:-.

Sept ‘06 TO Till Date

Plant : Bunga Orkid (Oil & Gas Production Platform)
Client : Talisman Malaysia Ltd
Location : Malaysia (3 WHRP & Bridge )
Silent Features : Total no. of lines 975 nos. / Stress Critical lines 350 nos.
400 lines in my area with 103 stress critical
16 Well, Launcher / Receiver, Close drain Vessel, Test separator
Self Involvement : Working as a Lead Piping PDMS Designer
Self study of all decks directly on pdms
3D modeling in pdms of equipment
Pipe routine in pdms with supports
Comments on vendor drawing, Nozzle orientation
Freezing equipment layout /safety layout
Idc comments on civil/mechanical/instrument/electrical drgs
Involved in Final deliverables like piping layout / Isometrics / Mto
Clash check /report in pdms




Aug ‘05 TO Aug’06

Plant : Stafjord B (Oil & Gas Production Platform)
Client : STATOIL
Location : deputed to AKER_KVAERNER Office in Stavanger, NORWAY for a year
Silent Features : Handled partial area of platform which covers Lift gas Manifold
Well conversion from oil to gas
Modification of existing oil lines
Routine includes tie-in points gave by survey people
Comments on civil structural / support drgs.
Self Involvement : Working as a Lead Piping PDMS Designer
Pipe routine in pdms
Freezing partial equipment layout /safety layout
Idc comments on civil/mechanical/instrument/electrical drgs

Oct ‘04 TO Aug’05

Plant : Motor Spirit Quality Up gradation
Client : IOCL / Lurgi India Co. Ltd
Location : Haldia West Bengal , India
Silent Features : No. of lines – 3000 / No of equipments- 300
Plant covering areas like
Naphtha Splitter – Unit 85
Isomerisation – Lpg Recovery Unit 86
Hydrogenation –FCC Gasoline – Unit 87
Splitter / Hydrasulphurisation
Job involves of 40 tie-in points
Self Involvement : Worked as a PDMS Piping Designer
Equipment modeling & Piping modeling in PDMS
Self piping study for unit 85 which covers Columns, Reactors,
Pumps, Exchangers etc….
Marked comments on vendor equipments drawing.
Prepared nozzle orientation for columns, drums etc.
Study covers equipment layout in which decided drop-out area, monorail
Movements, equipment spacing, floor modifications, platform creation etc….
Piping layout & support layout
Review of vendor drg
Co-ordination within piping group & checking of all piping documents


Feb ‘04 TO Oct ‘04

Plant : Gas Re-injection Project
Client : Banduq Co. Ltd.
Location : Abu Dhabi
Silent Features : Associated gas compressor / Acid gas compressors
Dehydration unit / Nitrogen and Air package
Gas injection Wellhead
Total lines 210 nos. / Stress critical lines 58 nos.



Self Involvement : Worked as a PDMS Piping Designer
Have done self study for various equipments
Co-ordination with other disciplines
Comments on vendor drawing, Nozzle orientation
Freezing equipment layout /safety layout
-------------------------------------------------------------------------------------------------------------------------------------------

 Worked with M/s. Technip India Ltd (Chennai office) . as a PDS Piping designer

Project worked on:-.

Nov ‘02 TO Feb‘04

Plant : Omifco Fertilizer Plant
Client : Oman India join venture
Location : Oman
Silent Features : New fertilizer plant
Worked in process/utility area contains power generation unit
Secondary rack, exchangers, tank, pumps, vessels
Steam tracing Manifolds /condensate
Self Involvement : Worked as a PDS Piping Designer
Have done self study for various equipments
All study work on board & transfer to 3D on pds
Co-ordination with other disciplines
Comments on vendor drawing, Nozzle orientation
Freezing equipment layout /safety layout
-------------------------------------------------------------------------------------------------------------------------------------------

 Worked with M/s. Larsen & Toubro Ltd (Mumbai office) . as a Piping designer

Project worked on:-.

May ‘02 TO Nov ‘02
Plant : Refinery (Heater area)
Client : IOCL / BPCL
Location : Gujarat / Mumbai
Silent Features : study for heater
Self Involvement : Worked as a Piping Designer
Have done study & prepared input for Pds designer
All study work on board & AutoCAD
Co-ordination with other disciplines
Comments on vendor drawing , Nozzle orientation
Freezing equipment layout /safety layout

------------------------------------------------------------------------------------------------------------------------------------------





 Worked with M/s. Sadra Construction (IRAN) . as a PDMS Piping designer

Project worked on:-.

Feb ‘02 TO Apr‘02

Plant : SPD 4 & 5
Client : Technip coflexip
Location : Iran (Offshore Platform)
Silent Features : modeling of 4 inch & below lines
Self Involvement : Worked as a PDMS Piping Designer
Have done self study for 4 inch and below lines
Directly modeling on Pdms
Co-ordination with other disciplines
Iso checking / Clash checking / reporting & Issuing lines to fab shop

-------------------------------------------------------------------------------------------------------------------------------------------


 Worked with M/s. Aker Kvaerner Powergas Mumbai. as a PDMS Piping designer on Self contract

Project worked on:-.

Feb ‘2000 TO Feb ‘2002

Plant : Dupont Refinery
Silent Features : Columns,Reactors,Pumps
Self Involvement : Worked as a PDMS Piping Designer
Have done self study for various equipments
Co-ordination with other disciplines
Comments on vendor drawing, Nozzle orientation

Plant : Balal Refinery
Silent Features : Columns, exchangers, Pumps
Self Involvement : Worked as a PDMS Piping Designer
Have done self study for various equipments
Co-ordination with other disciplines
Comments on vendor drawing, Nozzle orientation


Plant : Sasol Refinery
Silent Features : Columns, exchangers, Pumps, Rack
Self Involvement : Worked as a PDMS Piping Designer
Equipment & piping modeled on the basis of Ga input
Comments on vendor drawing, Nozzle orientation

-------------------------------------------------------------------------------------------------------------------------------------------




 Worked with M/s. Cosolidated Contracting Co. Abudhabi. as a AutoCAD Operator

Project worked on:-.

Jul ‘98 TO Sept ‘99

Plant : RREP (Ruwais Refinery Expansion Project) Abu Dhabi UAE
Silent Features : worked with construction group
Self Involvement : Worked as a AutoCAD operator
Have done spooling on TALISO package developed by CCC
Support detailing On Autocad 2002

-----------------------------------------------------------------------------------------------------------------------------------------------------------
 Worked with M/s. Marcon Engineers Pvt Ltd . as a Piping Draughtsman

1994 to 1998

Project worked on:-. Hpcl Refinery Mahul – FCCU Expansion Project
Piping study layout, Equipment layout on AutoCAD
Preparation of network diagram, sleeper layout,
Isometric drafting, sections & detailing, support layout on AutoCAD

Hpcl Refinery Mahul – FCCU Expansion Project
Designing, Checking & Study of piping layouts with Isometric
Of reactor area & DMDS storage tank area.
Drafting on microstation-95 also for the same area

Haldia Refinery
Designing, checking & study of piping layouts in
Process area with all kinds of isometic ( jacketed also ).
Also worked on Auto cad Rel .12.

Tce- Essar Refinery
Designing, checking & study of piping layouts in tank area
Rack layout prepared for the same.
Worked on Auto cad Rel .12.

Sasa Polymer plant
Drafting of piping layouts & support layout in Process area
Jacketed Isometric & layout with chemtex menu
Worked on Auto cad Rel .12. With the help of pipemenu


 Worked with M/s. Indicos Computer Services Mumbai. as a cad operator
Project worked on:-.

Feb ‘91 TO Feb ‘94

Nature of work : cadding services
Silent Features : P&id , iso’s. Layout, mechanical drgs of old projects
Self Involvement : Worked as a cad operator
cad drafting for various projects
Mechanical drafting & p&id, layout drafting on AutoCAD & micro station

EDUCATIONAL QUALIFICATION : PASSED S.S.C IN MARCH 1987
WITH DISTINCTION (78%)


TECHNICAL QUALIFICATION : PASSED MECHANICAL DRAUGHTSMAN FROM
(I. T. I.) THROUGH MUMBAI I.T.I IN 1989

Specialized Experience:

Well versed in PDMS Design (3D modeling)
Detail Engineering of Piping Systems in Major Oil & gas Plants (onshore/offshore) Petrochemical, Process Industry for Chemicals, Conveying Systems, Steam, Flare and Utilities
Preparation of equipment layout, piping general arrangement drawings and isometrics.
Checking of equipment layout, piping general arrangement drawings, isometrics and equipment’s platform/ladder orientation.
Nozzle orientation preparation /checking.
Review of package equipment, vendor drawing.
Development & checking of civil interface drawing.
Supporting of all types of critical & non critical lines.
Well versed in PDMS 11.3 / 11.5
Have done one entire project on PDS also.
Well versed in AutoCAD 2002 / 2004.

PACKAGES KNOWN: PDMS – 6 Years experience
PDS - 1 Year experience
MICROSTAION ’95 – 1 Year experience
AutoCAD R2000/14/12 - 7 Years experience

TOTAL EXPERIENCE : MORE THAN 16 YEARS

TOTAL PIPING EXPERIENCE : AKER KVAERNER NORWAY (deputation) - 1 Year
KVAERNER POWERGAS MUMBAI - 5 Years
TECHNIP INDIA LTD - 1 1/2 Year
MARCON ENGINEERS - 4 Years
CCC- ABUDHABI, UAE - 1 1/2 Year
L & T – MUMBAI - 1/2 Year
SADRA CONSTUCTION IRAN - 1/2 Year
INDICOS COMPUTERS-MUMBAI - 2 Year

no