CV Sr Electrical Supervisor

Resume built for oil and gas job opportunities by a jobseeker with experience in Sr Electrical Supervisor - would you like to offer this candidate a job/contract employment?

CV/Resume ID no.: 75281
Last Updated: Thursday, April 24, 2008

I consider myself to be a diligent team player who is always open to suggestions on how quality and efficiency can be improved. My work ethic is second to none and I thrive on new challenges always maintaining safety to be of the highest priority. I am highly skilled and have proven myself as a quality team leader in various roles over my career. I believe that with my extensive experience that I am a prolific asset in my chosen field of work

Professional Experience:
(Starting from present employer CAREER HISTORY

Position : Sr. Electrical Supervisor
Period : July 2006 till date
Employer : Petrodar Operating Company (PDOC)
Country : Republic of Sudan – Oil Field

Current Job Description: Working in energising panel side, Programme logic control operation, maintenance and trouble shoot, injection pumps, crude oil pumps, P C P Pumps, maintenance of V. S. D’s, E. S. D’s, working in main feeders, Booster Pumps, water inject pump, H. V. L. V Breakers, V. C. B, V. C. U, 33 kv, 6.6 KV to 400 volts, draw out breakers, field area, motors , MOV,LCP Fuel Pumps, Instrument utility, air compressor,
H T C P panel, Boiler Motors, Burner Motors, Communication with DCS

**********************************************************************************

Position : Electrical Supervisor
Period : 19th May 2006 to 3rd June 2006
Employer : Al- Bahar
Project : Training with Caterpillar Dealers
Country : Kuwait

Job Description : EMCP,EMCP+3, VR3, VR 6, CDVR, Laptop Analysis for power Generation, rectifiers, startor exicitor, bearing replacement, troubleshoot
Load Bank Test: for power generators 100%.

****************************************************************************

Position: Electrical Supervisor
Period: 1999 to 2006
Employer: T,tal, E.p
Client: E & P, Total, Alstaom, OMES
Project: Oil & gas Plant, Power Project
Country: Yemen ,Oman
Job description -Trouble shoot Corrective maintenance,Caterpillar,Gensetno:399, 398,800KW, 500KW,890KW,660KW, EMCP, AVR, Governor Control, Starter, Charger, Solenoid Breaker, Actuator, Battery,Oil temp.,Water temp., Overspeed etc.

Preventive Maintenance:
Alternator side, Bearings, EMCP, Control Wiring, Starter,Battery,Insulation checking, over under earth relay checking, Synchronising system etc.

Maintenance - of MCC, PCC, UPS, Motors Injection pump,Chemical Pump,Draw-out breakers, LV/MV terminations, DCS Instruments, Control room as per required rules and regulations, assisted high volt termination. V.S.D & Plant Safety & human safety, work safety knowledge

Installation Commissioning- PCC, MCC, Control room DCS Instrument), MICC, PILC, SWA,Cable Termination, Relay Calibration, Motor Commissioning, Erection works,
11KV, R.O Plant Tray Job (fiber) Megger test, Earth test cable layout, light fittings, Panel erection, After plant run, 6 month Maintenance & Servicing.

Work area involved : Control room, MPC relay calibration and MV termination

****************************************************************************
Position:Act Electrical Supervisor
Period: 1989 to 1997
Employer: Costain Company
Client: KOC , Qatar Gas, Qapco, Chiyoda Co. Japan, Adgas
Project: Qatar Gas
Country: Qatar, Abudhabi, Kuwait

Installation Commissioning- PCC, MCC, Control room DCS Instrument), MICC, PILC, SWA,Cable Termination, Relay Calibration, Motor Commissioning, Erection works,
11KV, R.O Plant Tray Job (fiber) Megger test, Earth test cable layout, light fittings, Panel erection, After plant run, 6 month Maintenance & Servicing.

Work area involved- Motors, battery, UPS, switch gears, F6, VCB etc., Hazardous area, flame proof, explosion proof motors, transformer substation, DCS panel fire system, MACC glanding, DCS instrument, PCC section, tray jobs, earthing and gas turbine plant QAPCO- 33KV and 11 KV cable termination

***************************************************************************
Position: At. Electrical supervisor
Period: 1983 to 1989
Employer: Oil & Natural Gas Company
Client: ONGC
Project: Uran ONGC
Country: Mumbai, India

Work Areas- Maintenance of Draw-out Breakers, Butterfly switches, VCB, Generators,Motors, FTA panel, UPS, SF6 Breaker, Earthing, Explosion proof , glanding etc.

Insulation & earth test, modification, Panel operation, Cable termination, isolation & de-isolation, battery maintenance motors, Gen set, lights, control panel, servicing etc.

Qualifications:
S. S. C and Diploma - Engineering

Training undergone:
Oil & Natural Gas Corporation,
Uran , Mumbai

Technical Training :
Fire systems, firefighting 1&2, Introduction to explosion chemical Explosive, Hazardous area, Isolation safety, working safety etc

Skills-&Ability.Summary

- Co-ordinate and supervise commissioning and construction work teams and plan future workprogrammes
-Liaise-between.Client and Contractor
- Successfully submit tender bids for major Industrial and Commercial projects
- Report on the integrity of explosion-protected equipment in hazardous areas
- Install explosion-protected equipment and wiring systems
- Inspect visually, existing hazardous area installations
- Ensure the safety of hazardous areas
- Knowledge of how to assess and minimise risks associated with working on Hazardous Area
. Equipment
- Ability to assess all risks before commencing work and have safe work practices
- Install and maintain medium and low voltage switchgear and control systems
- Able to work long shifts in remote areas.

Other work related Activities:
 Participate in commissioning new equipment and punch list clearance
 Assist the production supervisor in the preparation of modification request
 Trained and supervised on job trainees, knowledge of various types of welding and industrial enamels
 Preparation of daily trouble shoot and activity report, also keeps record of data and operation activities.
 Keep and maintain record of permit to work control system
 Suggestion to improve the power related with facilities and operation procedure
 Initiate corrective measures in case specific rectification of product is not reached
 Prepare the equipment for maintenance activities as per maintenance planning.
 Maintenance of Equipment
 Assist supervisor in production and HSE meeting with site Manager
Personal-Statement

I consider myself to be a diligent team player who is always open to suggestions on how quality and efficiency can be improved. My work ethic is second to none and I thrive on new challenges always maintaining safety to be of the highest priority. I am highly skilled and have proven myself as a quality team leader in various roles over my career. I believe that with my extensive experience that I am a prolific asset in my chosen field of work