CV Instrument engineer, Oil and Gas industry

Resume built for oil and gas job opportunities by a jobseeker with experience in Instrument engineer, Oil and Gas industry - would you like to offer this candidate a job/contract employment?

CV/Resume ID no.: 75442
Last Updated: Thursday, March 20, 2008

Respected Sir,

Sub: Instrument Engineer/ Sr. Instrument Engineer

I am very much glad to see that a vacancy is available in your organization. So, I submit the following few lines for your kind consideration. I have a very good 12 years instrumentation experience in Oil and Gas industry. I enclose here with an application (Curriculum vitae) for deserving position in your organization. As such, it is my humble request to you, to give an opportunity to render my services in your esteemed organization.

Thanking You

WORK EXPERIENCE:
Present: -Working in the M/S Nagarjuna Oil Corporation Ltd, Cuddalore,
Tamilanadu, India. As a Sr. Engineer –Instrumentation-Project from May
2006. It is a 6.0 MMTPA relocated refinery (Woerth refinery, Germany)
Under initial construction stage (Civil work)

PMC: - ABB (Lummus)

Present Duties and Responsibilities:-
As Asst. Manager-Instrumentation (Projects) in M/S Nagarjuna oil corporation Ltd,

· Reports to Asst. General Manager (Inst.) through Sr. Manager (Inst.) for administration matters, assignment of duties, control system functionality, safety and reliability.
· Preparation and issuing instrument specifications to Vendors for budgetary offers.
· Involving in P & ID reviews,
· Familiar with API 551,552,553 and 554 codes.
· Technical specification preparation for DCS & Other field Instruments.
· Studying of detailed engineering documents prepared by PMC (ABB Lummus) and making comments compared with API codes.
· Preparing the technical specifications for refurbishment of all instruments and control valves.
· Participating as a member to review the design of interface to existing process control and shut down system
· Reviewed the equipments vendor’s data.
· Carried out the bid evaluation and vendor selection process for procurement of material.
· Preparation of specifications and data sheets for a variety of field instruments and valves including pressure, temperature, flow and level gauges, transmitters, control valves, on/off valves and relief valves etc
· Other activities included inspection and review of technical documents like loop drawings, vendor data sheets, etc,

Previous:
Worked as a Sr. Engineer (Instrumentation) in the Instrument department of M/S The Andhra Petrochemicals Ltd, Visakhapatnam, India, from September 2003 to May 2006.

Worked as a Technician in the maintenance department of M/S Seraya Chemicals (Shell Oils) Singapore through M/S Radiant Instrument and Electrical Engineering PTE Ltd., from April 2003 to September 2003.

Worked as a Executive – Instrumentation in reputed Thapar group (BILT) of APR Ltd. Based at Warangal, A.P, India, from May 2002 to April 2003.

Worked as a Technician –Instrumentation in the department of M/S The Andhra Petrochemicals Ltd, Visakhapatnam, India, from April 1995 to May 2002.

Previous Job Activities:-

Duties and Responsibilities:-
As Sr. Engineer (Instrumentation) in M/S The Andhra Petrochemical Ltd.

· Reports to Manager (Inst) for administration matters, assignment of duties, control system functionality, safety and reliability.
· In charge of instrumentation for area 01(Syn. gas production plant) and utilities.
· Supports to SIC (shift in charge) and manager (production) for Instrumentation jobs in area 01(Syn. gas production plant) and utilities.
· Responsible for maintenance and trouble shooting of PLC and DCS.
· Preparation of PM schedule and annuals shut down schedule.
· Planning and supervising the regular PM jobs, which includes installation. Calibration, maintenance and trouble shooting of process control instruments.
· Attending to instrumentation related breakdown in various shop floors.
· Troubleshooting and writing trip reports for instrumentation related breakdowns.
· Preparation of specifications and data sheets for a variety of field instruments and valves including pressure, temperature, flow and level gauges, transmitters, control valves, on/off valves and relief valves etc.,
· Participated in P& ID development including entering instruments details to the database.
· Participated as a member to review the safety and shutdown logic diagrams.
· Participated as a member to review the fire and gas protection system.
· Participated as a member to review the design of interface to existing process control and shut down system.
· Raising the purchase requisition.
· Maintained stores inventory and material follow up.
· Reviewed the equipments vendor’s data.
· Carried out the bid evaluation and vendor selection process for procurement of material.
· Writing the monthly progress report at the end of the every month.
· Prepared the instruments testing procedures, calibration reports and PM check lists.
Duties and Responsibilities as a Technician:
· Calibration, maintenance installation and trouble shooting of field instruments of pressure, flow level and temperature transmitters. (Makes – Rosemount, Yakogawa, Taylor, ABB – Kent, Honeywell, Sakura, and Masoneilan).
· Calibration, maintenance, servicing and installation of pressure, temperature and level switches.
· Calibration, overhauling and preventive maintenance of control valves and its positioners. (Makes; - Fisher, Neles Jamsbury, Masoneilan, IIL, Mazada, and Parcol).
· Calibration, Trouble shooting and preventive maintenance of Fire and Gas Detection System. (Makes: - MSA, Mather Platt).
· Calibration, Installation Testing and Maintenance of Vibration Probes and thrust probes. (Make: - Bentley Nevada).
· Servicing, Testing and Installation of safety valves and Breather valves (Makes: - AUDCO, Mazada).
· Calibration and installation of panel and Field instruments.
· Following regular preventive maintenance schedule – inspects tests, services and calibration of all process instruments.
· Trouble shoots, reported or detected abnormailities in the control panel, its sensors, monitoring system, recording, indication/meeting gauges or devices including the control system by manipulating sensing if the unit controlled responds accordingly.
· Determine the nature of defect extends of damage and necessary repairs to restore the control panel operation to normal.
· In the course of instrument maintenance, repair and installation work.
· Reading interlock logic circuits diagrams, piping and instrument diagrams (P&ID)
· Follow established test and calibration procedures with standard calibrators.
· During periodic shutdown, works on corrective works in rotating equipment. Checking all related instruments such as vibration probes, thrust probes and its monitors, bearing temperature elements etc., also assist operation personnel during start – up.
· Keeping and maintaining records and files of equipment performance history and its Calibration sheets as per procedure.

EXPOSURES ON:

· Honey well TDC 3000 DCS A-MC’s start ups, module replacements and configurations, HG point configuration CL programming etc.,
· Honey well TDC 3000X DCS with Logic manager (LM), advanced process manager (APM) and remote I/O’s.
· Honey well IPC 620-25 PLC module configurations and replacements, Ladder logic programming.
· YASAKAWA’S U84 PLC, programming and module replacements.
· BENTLY NAVADA 7200, 3300 Vibration Monitors.
· YAKAGAWA DCS.
· Full advanced instruments like ultrasonic flow, vortex flows and radar level.

EDUCATION:
Bachelor of Engineering in Electronics and Communication Engineering from college of engineering, Andhra University, Visakhapatnam, AP, INDIA, in 2001 (part time- night college).
Diploma in Electronics and Communication Engineering from S.B.T.E.T. Hyderabad, INDIA, in 1994.
· Certificate of safety orientation course (Oil and Petrochemical) from MOM (ministry of Manpower) of Singapore.
· Certificate of Safety orientation course (construction) from MOM (Ministry of Manpower) of Singapore.

MS Office

EXPOSURES ON:

· Honey well TDC 3000 DCS A-MC’s start ups, module replacements and configurations, HG point configuration CL programming etc.,
· Honey well TDC 3000X DCS with Logic manager (LM), advanced process manager (APM) and remote I/O’s.
· Honey well IPC 620-25 PLC module configurations and replacements, Ladder logic programming.
· YASAKAWA’S U84 PLC, programming and module replacements.
· BENTLY NAVADA 7200, 3300 Vibration Monitors.
· YAKAGAWA DCS.
· Full advanced instruments like ultrasonic flow, vortex flows and radar level.