CV Project Manager, Site/Construction Manager, Operations Manager, Mechanical Inspector

Resume built for oil and gas job opportunities by a jobseeker with experience in Project Manager, Site/Construction Manager, Operations Manager, Mechanical Inspector - would you like to offer this candidate a job/contract employment?

CV/Resume ID no.: 75451

DATEOF BIRTH : 8’th June 1956 QUALIFICATION : Project Manager, Site/Construction Manager, Operations Manager, Mechanical Inspector

OTHER KNOWLEDGE & SKILLS :

First Aid Plant training, Saudi ARAMCO work permit receivership seminar/examination, Safety regulations control and management held at Jubail, Knowledge in welding codes and standard such as, ASME VIII Div.1 & IX, ASME B31.1/B31.3, ANSI‘s, API 1104, 650, 653, and AWS DI.I, AWWA for fiberglass and internal coated piping for potable water lines, ISO 9000, 1, 2, & 3, ISO 8501-1 and Pipeline corrosion protection programme-management & control thus pigging and air blowing, AWS member, Project management and implementations, project preparation, job execution plan, scheduling & Construction curve, materials take off & cost estimation, manpower(& its accommodations) & Equipment planning, other civil related site preparation, excavation, foundation, concreting and other structural erections, pave and non pave roads.

9 years as Mechanical Inspector in Quality Assurance / Quality Control Engineer, Thus Gas Turbine & Generator settings alignment, including Shaft & bearing its gap clearances, Diffusers its welding, other NDT’s and insulation, Boiler & Evaporator-Desalination erection/Installation, internal inspection and Boiler (HRSG) heat recovery steam generator and its associated piping, Furnace wall insulation and refractory & fire bricks arrangement, Down comer piping route arrangement & piping in fuel oil lines; all based on ASME B31.1/B31.3 and ASME VIII Div. 1.
Piping design and review and its calculation and supports application, based on applied international standards.
Tanks inspection, Commissioning and testing, Piping, welding inspection and RT film review, piping / structural fabrication and erections, grit/blasting and paint inspection, hydrostatic test and insulation inspection, Plant Equipment erection and alignment, also to include HVAC and Fire Fighting systems its erection and installation, 9 years as Site Manager/ Superintendent in electro-mechanical construction, 6 years in Quantity surveying, cost estimation & planning/scheduling (All in Desalination, Petrochemical, GOSPs, Refinery & Pipe line Projects), & 2 years as Sales


26 YEARS OF EXPERIENCE (SUMMARY)

9 years as Mechanical Inspector in Quality Assurance / Quality Control Engineer, Thus Gas Turbine & Generator settings alignment, including Shaft & bearing its gap clearances, Diffusers its welding, other NDT’s and insulation, Boiler & Evaporator-Desalination erection/Installation, internal inspection and Boiler (HRSG) heat recovery steam generator and its associated piping, Furnace wall insulation and refractory & fire bricks arrangement, Down comer piping route arrangement & piping in fuel oil lines; all based on ASME B31.1/B31.3 and ASME VIII Div. 1.
Piping design and review and its calculation and supports application, based on applied international standards.
Tanks inspection, Commissioning and testing, Piping, welding inspection and RT film review, piping / structural fabrication and erections, grit/blasting and paint inspection, hydrostatic test and insulation inspection, Plant Equipment erection and alignment, also to include HVAC and Fire Fighting systems its erection and installation, 9 years as Site Manager/ Superintendent in electro-mechanical construction, 6 years in Quantity surveying, cost estimation & planning/scheduling (All in Desalination, Petrochemical, GOSPs, Refinery & Pipe line Projects), & 2 years as Sales Engineer.
WORK HISTORY & EXPERIENCE

DATE and YEAR : 28 February 2006 to Present (August 2007)

COMPANY : Mott MacDonald Ltd.

ADDRESS : P.O. BOX 11302, Dubai, UAE
PROJECT : Aweer Gas Turbine Power Station ‘H’ Phase II &
Phase III, Spec: CNE/121/2004

POSITION : Mechanical Inspector

OWNER : DUBAI ELECTRICITY & WATER AUTHORITY
For the Emirate of Dubai

CONTRUCTORS : BEMCO - SIEMENS Ph2 & ETA-SIEMENS Ph3

NATURE of WORK
The project comprise of the construction erection of the three Gas Turbines and Generators associated with Diffusers and smoke stacks, three fuel oil Tanks and one demin tank, Transformers and Switchgear building facilities, with the capacity of 400MW and associated piping connections for phase 2 and The construction of the same for phase 3 with the capacity of 600MW which are the total of 1000MW.

YEAR : 16 November 2004 to 28 February 2006

COMPANY : Mott MacDonald Co. Ltd.

ADRESS : P. O. Box 47094, Abu Dhabi UAE

POSITION : Mechanical Inspector (Owner’s Engineer OE)
PROJECT : Umm AL NAR Independent Water & Power Project

OWNER : ARABIAN POWER COMPANY

CONTRUCTORS : MITSUI & CO. (MEDDLE EAST) E.C.
Power Island : Mitsui / Toshiba
Desalination : Mitsui / Hitachi Zosen

NATURE of WORK
The construction and erection of Five Gas Turbines and Generators associated with five Boilers and piping (HRSG) heat recovery steam generator, 2 steam Turbine-Generators, two Evaporator-Desalination with the capacity of 12.5 MIGD. And three power Transformers with the capacity of 500, 400, and 350MW, total capacity of 1250MW, Four product water Tanks Two Demin Tanks and two Fuel oil tanks with its associated piping.

Duties and Responsibilities:
Based on its scope of works & procedures its applied codes & standards and RFI receives, make a daily surveillance and inspection on various fit-ups and welding, thus structural and piping erection and installation, boiler assembly internal inspection, And walk-down inspection making punch lists of comments prior to its commissioning & mechanical completion.

YEAR : 5 May 1998 to 19 July 2004

COMPANY : Ewbank Preece Power & Water Ltd.
(Mott MacDonald Group Registered in England, no.1688229)
P. O. Box 3457, Jeddah 21471, K. S. A.
POSITION : Mechanical Inspector

PROJECT: Shoaiba Phase2 Power & Water DesalinationLot1A/1B (Saline Water Convertion Corporaton)
CONTRACTORS : BECHTEL/(HANJUNG)Doosan/ALSTOM(ABB)

Nature of work;
Client’s Consultant for Saline Water Conversion Corporation (SWCC) in the construction, commissioning, and maintenance of a 5x100 MW Back Pressure Steam Turbine Power Plant with plant configuration on a range system comprising 5 boiler/turbine units, each turbine associating with two MSF desalination units and associated facilities (awarded to Doosan). Also, the New Tanker Terminal (awarded to Saudi Archirodon) for receiving and unloading crude oil tankers of 40,000 to 100,000 tons capacity to supply the plant with necessary fuel.

DATE & YEAR : 12 April 1994 to February 1998

COMPANY : FMQ Sons Co.
: P.O. Box 388 Dhahran Airport, K. S. A.
POSITION : Site Manager

PROJECT : ARAMCO PROJECTS
Abqaiq GOSP5/6, Aindar GOSP 4/6, Uthmaniyah
GOSP 10/11, Shedgum NGL & Shedgum 1&2.

DUTIES and RESPOINSIBILITIES
Project site preparation of job execution thus & to include camp site arrangement, office and construction staffs, manpower required, tools /Equipment and transport vehicles and materials procurement preparation, for the intended projects.
Project site implementation and delegation of activities, (civil Supervisors) thus site layouts, & excavation for foundations & pipe trenching, the making of right of ways above ground piping installations from Well heads to main (trunk) line.
Weekly progress site meeting (between the client-owner and contractor) discussing the issues and information with regards to the development of the project, and the problem encountered, also interoffice staff meetings exchanging information and issues to meet the supervisors needs thus, the project Equipment required its availability in relation to the actual site situations and scheduling. Liaise to the top management with regards to the problem encountered and on how to coup the project on schedule.

DATE and YEAR : 1’st April 1991 to August 1994
COMPANY : Bechtel Construction & Management
Kuwait Project

POSITION : Project Superintendent
PROJECT : Al - Awdah / Al - Tamer Projects
Ahmadi Refinery, and Shuaiba south pier

DUTIES and RESPONSIBILITIES

Make a draft preparation based on the project schedule gather all information with regards the availability of materials and equipment, based on the reports & direct information from the in-charge staff, weekly monitoring of bar-chart schedule, making preparation of the prioritize activities and these will be the agenda during weekly progress meeting and resolve the issues that causes the delay & lack of co-ordination. Through these I have to liaise to the top management thru correspondence and verbal communication. Regularly I have to make visit the site and observe the actual status of the project.
Gather information feed-back from supervisors and foremen with regards to their workforce status, as company’s policy.

DATE and YEAR : 1’st December 1984 to December 1990
COMPANY : Sidra Oil & Gas Projects Co. Ltd.
P. O. Box 2421, Tripoli, Libya
POSITION : Site Superintendent

Project Assignments:

1. Al-Baidah 46 AGOCO’s gas plant modification
2. Zueitina Oil Co. (Occidental of Libya) 103A and 103D
3. Tripoli main office - Engineering group

DATE and YEAR : 1’st May 1981 to September 1984

COMPANY : Faysal Mohd. Qahtani Sons Co. P. O. Box 388 Dhahran Airport, K. S. A.

POSITION : QA / QC Engineer / Mechanical Supervisor

PROJECT : Uthmaniyah GOSP2, Aindar GOSP 4 & 6

DATE and YEAR : September 1978 to February 1981
COMPANY LEITZ-ZULUETA INC.
117Gamboa St. Legaspi Vill.Makati, Metro Manila, Philippines
POSITION : Sales Engineer
PRODUCT Line : Exclusive distributor of Fox Boro Instruments & Other related industrial products

First Aid Plant training, Saudi ARAMCO work permit receivership seminar/examination, Safety regulations control and management held at Jubail, Knowledge in welding codes and standard such as, ASME VIII Div.1 & IX, ASME B31.1/B31.3, ANSI‘s, API 1104, 650, 653, and AWS DI.I, AWWA for fiberglass and internal coated piping for potable water lines, ISO 9000, 1, 2, & 3, ISO 8501-1 and Pipeline corrosion protection programme-management & control thus pigging and air blowing, AWS member, Project management and implementations, project preparation, job execution plan, scheduling & Construction curve, materials take off & cost estimation, manpower(& its accommodations) & Equipment planning, other civil related site preparation, excavation, foundation, concreting and other structural erections, pave and non pave roads.

EDUCATIONAL BACKGROUND:
Course Taken School/University Year Attended
B.S. in Aeronautical Engineering FEATI University 1974 - 1978
Santa Cruz, Manila, Phils.

Aircraft Maintenance Engineering Cebu Aeronautical Tech. 1972 - 1974
( 2 year course ) School – Cebu City, Phils

Knowledge in automation Internet exploration for such materials requirement and procuments, MS Word, EXCEL

Can Prepare Architechtural Designs (manual) its concept appluied most modern furnishings in interiors, in Four Storey biulding, and Villas, can prepare take-off materials cost estimates, Electrical housing design & lightings, Water destribution, and plumbing, Can prepare project Scheduling S-curve