Home  Register  Jobs  CVs  Job Search  Worldwide  Process  Help  Search  Scams  JA  B  C
Oil Offshore Marine Careers in Onshore and Offshore Drilling Energy Industry Oil Offshore Marine: Oil & Gas Jobs & CVs Online recruitment services (job vacancies, resume/cv database search) for Oil Industry, Energy, Offshore, Petroleum, Engineering, Construction, Drilling, Subsea, Marine, Shipbuilding, Shipping, Petrochemical. Have your own FREE account! free cv upload registration on Oil-Offshore-Marine.com recruiter benefits: free job postings and cv search on Oil-Offshore-Marine.com
  Need to find something?
 
 Username:  
 Password:  
Oil Offshore Marine Register
 
  Remember my password?  
 Recruiters - Employers & Agencies
  Advertise / Contact Us
free cv upload for all job seekers, free access to oil and gas jobs
subscribe to oil careers alerts, oil jobs postings, drilling rig jobs, engineering jobs

 

CV HVAC Design & Estimation Engineer - Mechanical Engineer

 
HVAC Design & Estimation Engineer - Mechanical Engineer

Resume built for oil and gas job opportunities by a jobseeker with experience in HVAC Design & Estimation Engineer - Mechanical Engineer - would you like to offer this candidate a job/contract employment?

Please contact us OR search for another relevant oil CV/Resume in our impressive oil industry database

CV/Resume ID no.: 75470

Location (Residence): Abu Dhabi, United Arab Emirates
Citizenship: India
 
Languages:
  Native: Urdu
  Other: English, Hindi, Telugu
 
Education & Experience: Work Authorization & Relocation:
Education:
  Masters in System Management

Years of Experience: 6 years
Authorized to work in:
   United States, Australia, India, Kuwait, New Zealand, Oman, Saudi Arabia
Present Location:
   UAE, Abu Dhabi
Relocation:
   Anywhere (International)
 
Expertise
Category Subcategory Ability Experience
Design/Software Other Experienced 15 years
 
CV/Resume Details
 
1. Summary (Cover Letter) - CV/Resume Part 1 [Mandatory]

Dear Sir,
Please find attached my CV for your kind consideration for the post of HVAC Design & Estimation Engineer.

2. Work Experience - CV/Resume Part 2 [Mandatory]

SKILLS : - Air conditioning cooling load calculations following ASHRAE &
Carrier Hourly Analysis program v4.06 & v4.2
- Duct system design following SMACNA DW 144 Codes,
duct supervision fabrication and installation of the ductwork.
- Calculation of static pressure of blowers and selection of blowers.
- Selection of chillers, AHU’s, FCU’s, exhaust fans, blowers and
other accessories.
- Chilled water pipe design and pump head calculation, preparation of drawings for A/C equipment’s and accessories installation.
- Preparing of material submittals for the consultant’s approval.
- Estimation of Air conditioning equipment and accessories.
- Material Take off’s for ducting and piping items at various stages of
project.
- Material requisition for erection work.
- Assuring proper technical specifications for Site Engineers and workers.
- Reviewing of the updating submittals and drawings.


EMPLOYMENT :

Mar 2006 – To date : 1.COMPANY CONTROL CONTRACTING & TRADING
CO,ABUDHABI,UAE
POSITION Design and Estimation Engineer.


Mar 2004 –Nov 2005 : 2.COMPANY COMFORT CARE SYSTEMS,INDIA
POSITION Design Engineer.


Nov 2001 –Dec 2003 : 3.COMPANY S.S.COOLING SYSTEMS,INDIA
POSITION Design Engineer.

UAE Experience Summary:

ORGANISATION DESIGNATION AREA OF SPECIALISATION SUMMARY OF REPONSIBILITY
CONTROL CONTRACTING & TRADING CO, ABUDHABI, UAE Design and Estimation Engineer Focusing mainly on1.Offshore Projects {such as: Platforms (which comprises of Switchgear rooms, Battery rooms, Accommodation etc), Rigs & - Barge Accommodation}. 2.Onshore Projects (Commercial type) Ø Detailed Designing of HVAC system (includes Air-Conditioning and Mechanical Ventilation) as per the client provided documents.Ø Heat Load Calculation using HAP v4.06 and Ashrae standards.Ø Designing of Ductwork and its complete accessories as per DW 144 and Smacna standards.Ø Designing of Chilled water pipe and its complete accessories.Ø Designing of Refrigerant pipes and its complete accessories.Ø Instructing to the Draughtsman while preparing the different Layouts (Air-flow Chilled water layouts etc.).Ø Reviewing draft tender documents to prepare commercial & technical bid proposal documentation to ensure all systems and components of the tender are included.Ø Preparing reports and supporting documents to submit to Proposal Coordinator to identify areas requiring more information to ensure the Company is positioned to win and secure bids.Ø To interpret and follow Company tendering processes and procedures to ensure all aspects of tenders are met including relevant discipline codes and standardsØ Prepare quantity takeoff from drawings and tender documents. Ø Prepare pre-tender queries if any.Ø Floating the enquiries to the approved Vendors as per the ISO procedures. Following-up with the suppliers to get the quotations ASAP.Ø Floating enquiries for sub contractor's works.Ø Attending site visits, meeting with client / consultant for pre and post tender clarifications.Ø Prepare technical and commercial comparison of suppliers / sub contractor’s offers.Ø Prepare costing sheet including direct cost, indirect cost, man hours etc.Ø Co ordinate with other discipline Engineers for compiling tender documents.Ø Prepare list of equipments, skilled and unskilled manpower requirements and assist planning Engineer in preparing manpower histogram, project schedule etc.Ø Prepare replies for post tender clarificationsØ Submitting the Method statement/Technical proposal/ vendor list/Clarifications/Exclusions/Deviations to the client.

FOLLOWING ARE THE MAJOR PROJECTS INVOLVED BY ME IN INDIA:
1. Kalaniketan Complex, Hyderabad:
60 TR Air-cooled Chilled water plant, comprising of 30 TR x 2 No’s Chillers with 20 TR AHU & 40 TR ( Each 2 TR x 20 No’s) FCU’S
I have done Building Survey, cooling Load Calculations, Selection of Chiller with all FCU’s & AHU Design of chilled water piping with selection of chilled water pumps with pump head calculations. Design of Duct with static pressure calculations. Guiding to the draftsman for the preparation of drawings.

2. Narayana Hospital, Nizambad:
80 TR DX system Comprising of 40 TR X 2 No’s with 2 No’s –AHU’s Supplying to Common wards. Complete Erection of D-X System with Duct Design, Calculating Static Pressure & Installation of duct work, Pre Commissioning & Commissioning of Plant & Duct work.

3. MatrixInfocom (p) ltd., Hyderabad:
Capacity of the Plant 200TR Air- Cooled Chilled Water Plant.
This Project involved planning, Designing and Erection. The Designing Part includes Heat Load Calculations (BTU Sheets) Chiller, Pipe, AHU/FCU Selections and duct designing.

4. Telephone Exchange, Ananthapur:
30 TR Package A/c Comprising of 10TR X 3 No’s. Combined to a common ducting from the plenum. Cooling Load Calculations. Selection of Package A/c with duct design. Complete installation & Commissioning of A/c Systems.

5. Chandana’s Showroom:
Installation of Ductable Splits of 3 TR x 7 No’s. Only Selection of units & Installation of A/c with ducting work.

6. Indian overseas bank:
Work involved 30 TR Package A/c Comprising of 10 TR x 3 No’s. Combined to a common ducting from the plenum. Cooling Load Calculations, Selection of Package A/c with duct design. Complete Installation & Commissioning of A/c Systems.
THE PROJECTS IN WHICH I WAS INVOLVED IN THE ABOVE SAID ORGANISATIONS ARE AS GIVEN BELOW

· Overall Building heating loads have been calculated. During load calculation all Sensible and Latent heat sources have been considered. Zoning exposure and building mass have been considered in heating and cooling calculations. The air conditioning systems have been provided comfort conditions in all rooms throughout the operating period. Each zone, room and portion of room with different load profile, orientation or sensible load have been calculated. Separate HAP / block loads for each Air Handling System have been calculated in accordance with ASHRAE and Project specification given by consultants.
· Air Distribution Systems have been designed in accordance with SMACNA DW 144 & Carrier Codes Air outlets and inlets have been shown on the drawing and indicated on the schedule drawing, Manufactured Standard diffusers, grilles have been used.
· Static Pressure calculated for selection of blowers. Equipment has been selected from approved vendors listed in Project specifications and in accordance with required capacity and performance data.
· Infiltration loads have been accounted at a minimum rate of 0.5 air changes per hour in heating / cooling calculation in accordance with project specifications.
· Toilet rooms have been provided with mechanically operated exhaust system capable of providing a minimum of four (4 - 6) air changes per hours.
· Air system equipment and ductwork, supply & return grilles / diffusers have been installed according to approved construction drawings and specification and manufacturers installation manual.
· Each completed assembled refrigerant system shall be leak tested to continue that the joint seal or connection leak. These leak tests have been performed prior to that painting and insulation.
· All building environment systems and components have been checked and adjusted to produce the design objectives.
· The original drawings have been updated to “ as- built” condition, when the construction of the project is completed & submitted to client.


3. Education & Training - CV/Resume Part 3 [Mandatory]

JOB TITLE : Design and Estimation Engineer
QUALIFICATION : 2001 – B. E. (Mechanical) from Gulbarga University
2006 – MBA (System Mngt) from Sikkim Manipal University


4. Computer Skills - CV/Resume Part 4 [Mandatory]
ADDITIONAL : - Hourly Analysis program v4.06 & v4.2
INFORMATION - Block load v3.05
- Carrier Psychrometric Utility program v1.23
- Psychrometric Calculator
- Design tool duct sizer v6.4
- Master Converter 2.3
- MSOffice, good at Ms Excel.
5. Other Skills - CV/Resume Part 5 [Optional]
SKILLS : - Air conditioning cooling load calculations following ASHRAE &
Carrier Hourly Analysis program v4.06 & v4.2
- Duct system design following SMACNA DW 144 Codes,
duct supervision fabrication and installation of the ductwork.
- Calculation of static pressure of blowers and selection of blowers.
- Selection of chillers, AHU’s, FCU’s, exhaust fans, blowers and
other accessories.
- Chilled water pipe design and pump head calculation, preparation of drawings for A/C equipment’s and accessories installation.
- Preparing of material submittals for the consultant’s approval.
- Estimation of Air conditioning equipment and accessories.
- Material Take off’s for ducting and piping items at various stages of
project.
- Material requisition for erection work.
- Assuring proper technical specifications for Site Engineers and workers.
- Reviewing of the updating submittals and drawings.
6. Additional Information - CV/Resume Part 6 [Optional]
-

 

Questions about this candidate? Contact us for an immediate answer. To find similar people [or more experienced] - active jobseekers, please login OR create, FREE of charge, your own company account.

In order to view this candidate's contact information, you must a) be registered with Oil Offshore Marine - Worldwide Oil & Gas Jobs, and b) have already purchased a subscription.

Login Register Pricing Information
HVAC Design & Estimation Engineer - Mechanical Engineer
CV/Resume ID no.: 75470

Relevant CVs; view more oil and gas CVs
1. INSTRUMENTATION DESIGN AND DETAIL ENGINEER
2. Instrument / Electrical Engineer
3. civil engineer
4. HVAC Design & Estimation Engineer - Mechanical Engineer
5. Piping - Ship Designing
6. LWD MWD, Drilling Analysis/ Fresh Graduated
7. Design engineer (static equipment)
8. PDMS ADMINISTRATOR
9. Process Engineer
10. Structural Designer/Detailer
11. Involved in design for continuous improvement for process/cost/quality
12. PLC-SCADA Engineer
13. Structural Civil Engineer
14. HVAC Designer Engineer - Project Engineer
15. Structural Track Supervisor
16. HSE Advisor offshore and onshore oil gas, power plant
17. Control System engineer, System Engineer
18. Installations and Commissioning Engineer, Engineer/Manager in Gas pipelines and instalations
19. Mechanical Engineer, overhaul of gas turbine engine parts. Air flow Sonic and subsonic range
20. Electronics Engineer Production & Testing in MAK India AC, DC and AC/DC Ground Power Units (GPUs)
 
 
Other CVs; view more oil and gas CVs
1. Master, Rig Mover, Captain, Anchor handling, Towing, Supply operations, Sesmic Survey
2. Piping Mechanical Engineering
3. AUTOMATION ENGINEER WITH KNOWLEDGE OF PLC, SCDA, HMI.
4. Welding QA QC
5. Drilling Fluids Engineer, Mud Engineer, MI SWACO
6. Maritime Officer
7. Medical Officer, Expert Accident and Emergency Physician, Oil & Gas industry
8. HSE Engineer for offshore and onshore jobs
9. Piping Engineer Aker Solutions BV, PDMS, Smart Plant, Microstation, Navis Works
10. Coating / Painting Supervisor, FROSIO course Singapore, Malaysia Marine Heavy Engineering, Johor Bah
11. Graduate Mechanical / Mechatronics Engineer
12. Electronic Technician, Hardware Design, Maintainance
13. WELDING INSPECTOR CSWIP 3.2 CERTIFICATE
14. Sr Drilling Engineer, designed and drilled HP-HT gas wells with sour gas and horizontal wells
15. Security Specialist Maritime Anti Piracy Protection, GEO OPS Global Executive Outreach
16. PhD Geophysicist, Geogiga, PGC, SeisOpt, GREMIX, SEISTRIX, SIESIMAGER, VIEWSEIS, REFLEXW
17. Experienced qualified Health and Safety professional in construction engineering and marine
18. Sr QA Inspector KEPPEL FELS Singapore Wens Quality Assurance Pvt Ltd, Chennai, India
19. Environmental Engineer Specialist, desalination, wastewater treatment Doosan Desalination R&D Center
20. Junior piping engineer - Piping layout, stress analysis, design and detail engineering
21. Piping Draughtsman Indian RCC & Steel Structure detailing for industrial, residential & commercial
22. Romanian Toolpusher, Rig Manager, Company Man with 12 years of oilfield experience
23. Mechanical rotating equipment technician, hands-on experience in commissioning, alignment, start-up
24. Trainee Software Engineer Select Software, JeevanBhimaNagar, Bangalore India
25. Experienced Marine HR & Training Professional, BP Shipping Shell Ship Management Bibby International
26. Production Engineer / Well Services Engineer ConocoPhillips Algeria ENI Iran B.V. Shell Nigeria
27. Sr Electrical Engineer experience in design and construction supervision of Oil & Gas projects
28. Junior Mud Logging Geologist, Baker Hughes Inteq, Qatar for clients Ras-Gas, Qatar Gas, Maersk & Oxy
29. Project Coordinator / Project Planning Staff, Primavera Project Planner (P3) / Primavera Enterprise
30. Roughneck / Roustabout in Aban Offshore in FPU Tahara, experience in oil rig drilling company
 
 

Press Ctrl+D to Bookmark - Tell a Friend - Job Archives - Jobs - Oil and Gas CVs Resumes - Subscribe to Job Alerts - Site Map - Events - Legal - Privacy - Contact

oil offshore marine's website design

Official Blog - International Maritime Signal Flags - Glossary of Oil & Gas Jobs Definitions - Abbreviations & Acronyms from the Oil, Offshore, Marine, and Shipping Industries - Engineering Oil Jobs - Top 100 Energy Sites - Marine Jobs - Offshore Jobs - Oil Careers - Maritime Jobs - PDS/PDMS Oil & Gas Jobs - Oil Industry Jobs - Oil Field Jobs - Oil and Gas Careers - Petroleum Jobs - Oil Rig Jobs - Offshore Oil Rig Jobs - Drilling Jobs - Oil Industry - Official Sitemap - Jobs Feed - Login to your Oil-Offshore-Marine.com account

www.Oil-Offshore-Marine.com - Your Oil & Gas, Offshore, Construction, Shipping, Petrochemical, and Marine Engineering Recruitment Center.

© Oil Offshore Marine - Oil & Gas Jobs - All Rights Reserved.
This website is designed for international users, and its use is governed by Oil Offshore Marine - Oil & Gas Jobs Legal provisions. By browsing on any page of this website, you are deemed to have accepted all Oil Offshore Marine - Worldwide Center of Oil & Gas Jobs legal terms. If you do not agree with Oil Offshore Marine's legal provisions, you must stop using this website and its services.


find oil and gas jobs

  Looking for something?