CV Lead Piping Engineer, Chief Piping Engineer, Pricipal Piping engineer

Resume built for oil and gas job opportunities by a jobseeker with experience in Lead Piping Engineer, Chief Piping Engineer, Pricipal Piping engineer - would you like to offer this candidate a job/contract employment?

CV/Resume ID no.: 75603
Last Updated: Friday, June 24, 2011

Over 25 years of comprehensive expertise in the various phases of projects design and detailed engineering, with specific experience in piping/pipeline(onshore/offshore/FPSO) design and pipe supports which includes 12 years Middle East Experience.
Conversant with Shell standards, all international codes like BSI, ANSI, ASTM, API & ASME, DIN, TEMA, AWWA, AWS, NFPA, OSHA, etc.,
Having worked for the projects of clients such as Petroleum Development Oman, Kuwait Oil Company(KOC),Oman Refinery Company, Qatar Petroleum, British Petroleum, Occidental, Anadarco, Tributan Exports Ltd., Indorama Synthetic (I) Pvt. Ltd., SASA-Turkey, Reliance India Ltd., Hainan-China, Indian Oil Corporation Ltd., Oil & Natural Gas Commission, Jordan Phosphate Mines, Mazagon Dock Ltd., and Umm-Al-Naar Refinery besides being associated with the engineering of several power plant and process plant projects in India and Middle East countries.

PRESENT COMPANY – CRESTVILLE ENGINEERING & TECHNOLOGY CO.LTD, NIGERIA

PRESENT POSITION – Piping Lead/Project Lead (From July,'07)

Previous Company: SIMON CARVES INDIA LIMITED , DELHI
Designation: Senior Manager
Duration: Since March 2007 to July 2007
Was Handling prestigious ONGC’s pipeline projects


2006 March – 2007 March Foster Wheeler (I) Pvt Ltd, India,Chennai
Lead Engineer - Piping

Lucite International is the world's leading supplier of Methyl Methacrylate (MMA), and the only organisation with production, research and development, sales and marketing facilities in all three major geo-economic regions – the Americas, Europe and Asia. It has 25% market share in MMA by volume with over 600 kte of capacity. MMA is the foundation for a diverse and attractive range of products from mobile phone screens, through solid surfaces for kitchens and bathrooms to coatings for use in both home and industrial environments. Total cost of the project is 1500 crores Indian Rupees.
Principal aspects of my Role:
Responsible for quality and timely deliverables from the piping, materials, stress & support engineering team for the specific project (Lucite International-Singapore), and involvement in the general departmental activities like man-hour control, man power planning, staff training and graduate engineers training. Preparation of weekly/monthly report, attending the client meeting/weekly progress meeting/monthly progress meeting/manpower planning/staff appraisals/monitoring the work progress to meet the schedule date/participating in the technical discussion with the client/project team and other discipline/participation in the 30%,60% & 90% project review. Reporting to the group manager.

2005 – 2006 Petrofac International Ltd., Sharjah, U.A.E.
Area Lead Engineer – Piping
Handled prestigious 680 million dollar plant modernization project independently for Gathering Center-04, KUWAIT OIL CO. Facility upgrading and relocation of under ground process piping to above ground and new additional desalter/condensate recovery unit and new L.P. Separator facilities. Responsible for man-hour control, quality and timely deliverables from the piping.

2003 – 2005 Tebodin & Partner Llc., Muscat, Oman
Sr.Engineer/Design coordinator-Piping/Pipeline

Handled independently the following project for PETROLEUM DEVELOPMENT OMAN.
MOL/SOGL As-built clean-up
48” LNG Supply Pipeline Extension to Sur
LEKHWAIR-DHULAIMA Pipelines
Integrity Study –Phase-I MOL/SOGL Ancillary pipe work
YP4&YP5 Wellhead hook-up and Flow lines to GGP-II Manifold
Jawda-Rima INF new 12”-GRE Pipeline FED/DD
Fahud Water Flood Pipelines (FEED)
Nimr E1 Header Pipeline Debottlenecking
YP4 & YP5 Wellhead hook-up & Flow lines to GGP-II manifold
Qaharir-Thuleilat new 20” pipeline
Thamoud-Maurid 14” Pipeline replacement
MOL/SOGL Integrity repairs and valve replacement
LNG-SAIH RAWL Pipe work replacement for Train-1,Train-2 & Slug catcher area
Responsible for Front End Design, Detailed Design, ANSI B 31.3, B 31.4, B31.8 and API requirements and standards, critical valves, block valve stations for the projects with follow-up of man-hour control, client coordination, vendor package review and overall quality management of the whole project.


2001 – 2003 Granherne International Ltd., Doha, Qatar
Engineer/Principal Designer – Piping/pipeline

Handled independently many projects for Occidental &Qatar Petroleum. Worked independently for pipeline modifications for pipeline campaign 2000,2001 for Occidental-Qatar offshore platforms Issb,
Is-04,06,V07,T10,20,26,29,30,35&43 of PS-1 and made frequent site visit for above said platforms. Feed for Powered Water Injection System of pump stations-1,2,3,4,7,8&9 for Qatar Petroleum and visited all sites as Khuff sites,Khatiya main, north and south,Fahahil main, north and south, Desalination plants, Point u,Point n,Powered water inj.stations and all clusters for Qatar Petroleum’s fire and gas detection upgrade project.
Responsible for man-hour control, quality and timely deliverables from a team of Lead designers/Designers and draughtsmen.
1997 – 2001 Electrowatt Engineering., Muscat, Oman
Lead designer – Piping/pipeline

Deputed to Oman Refinery Company and worked as a design office in charge.
Projects handled in the areas of Oman Refinery :
Crude distillation Unit, Hydro treater Unit, Net gas hydrocarbon recovery system merox Unit, Gas tail Unit, Sulphur recovery Unit, Mogas blending/butane loading Unit, Sour water stripper Unit, Power generation plant etc.,
Was leading designer / Junior Designer, Draughtsman team & Responsible for preparation and checking of design drawings, Layouts, Isometrics, Tie-in schedules, Bill of materials, Man hour estimating and all piping detail drawings.
Worked as a senior designer for following projects:
Oman LNG upstream design review for PDO. Front End Design for Mukaizna Oil field for PDO, Design modification of process area, flare area, manifold area, Flow line survey, Pipeline routing and survey, well Hook-up for Oil and water wells, Water injection facilities, Pipe racks, Tank farm area, Instrument air facilities, Water Disposal well, Water service well, Drain facility, Utility, Oil gathering station and Production stations at desert of Petroleum Development Oman (PDO).Worked at all PDO desert sites for design modification.
1995 – 1997 Sharikat Hani Llc., Muscat, Oman
Senior designer – Piping/pipeline

Was leading designer / Junior Designer, Draughtsman team & Responsible for preparation and checking of design drawings, Layouts, Isometrics, Tie-in schedules, Bill of materials, Man hour estimating and all piping detail drawings.
Worked as a senior designer for following projects:
Complete As-built Isometric drawings & PGAs for Marmul area, Nimr area, Rima area, Bhaja and all south Oman production and gathering stations of PDO. (Worked at desert full time for above said projects).
1993 – 1995 Thapar chemtex Consultants Ltd., Bangalore, India
(A joint venture company of Thapar Group having technical collaboration with Chemtex Int’l, U.S.A.)
Designer – Piping
Worked as a designer for the following clients as turnkey projects:
Tributan Exports Ltd., Indorama Synthetic India Ltd., S A S A-Turkey, Reliance India Ltd-Gujarat, Hainan-China, Iocl-Madras.


1991 – 1993 John Brown Engg.(I) Pvt.Ltd., Bangalore, India
(A joint venture company was having technical collaboration with John Brown London, U.K.)
Senior Draughtsman – Piping
Worked as a Senior draughtsman for the following detail engineering projects for ONGC offshore platforms like Main Deck, Cellar Deck, Below Deck and Heli Deck :
ONGC-Neelam Platforms 5,6,8 &9 and IM,IN,IT, & IW of Bombay High South field.
1989 – 1991 Southern Petrochemical Industries Corporation Ltd., Chennai
Draughtsman – Piping
Worked as a draughtsman for the following turnkey projects:
Iocl-Baroda, Arochem-Madras, Ongc-Lanwa, Umm-Al-Naar Refinery, Ongc-Sobhasan, Jordan Phosphate Mines, Mazagon Dock Ltd., Tnpl-Madras, Ipl-Gujarat
1982 – 1989 Vijayshree Equipments Pvt. Ltd., (A joint venture with Ransburg Gema-West Germany)
Draughtsman – Piping
Worked as a Jr.draughtsman for turnkey projects of pre-treatment plants & Powder coating plants. Design and fabrication of utility piping, medium size ASME Sec.VIII vessels, air compressors, ducts.

QUALIFICATION : MS Mech.Engg
BS Mechanical Engg.
BS Petroleum Engg.
Diploma in Mechanical Draughtsmanship
Two years Higher Secondary (Vocational) course in General
machinist with machine drawings
CCNA-Cisco-USA

PROFESSIONAL COURSES : Basic first aid certificate
Course H2S awareness and escape course, Desert driving skill certificate
course, Health and safety environment course, Permit to work (PTW) course.

SOFTWARE PROFICIENCY : CAESAR II (Three months experience), Auto Pipe, Auto Plant
AutoCAD (All versions including 2006) CCNA-Cisco-Usa, MS
Office, Windows, Word & Excel Software programming in
BASIC, FORTRAN
Auto Lisp programming
PDMS-Review the model in PDMS
PDS-Smart Plant Review package
Plant design system (PDS)
Equipment Modeling,
Piping Designer,
Isometric Drawing Manager

MS Office, Windows, Word & Excel Software programming in BASIC, FORTRAN
Auto Lisp programming

OFFSHORE EXPERIENCE : Six Years