CV PDMS PIPING DESIGNER

Resume built for oil and gas job opportunities by a jobseeker with experience in PDMS PIPING DESIGNER - would you like to offer this candidate a job/contract employment?

CV/Resume ID no.: 75624
Last Updated: Wednesday, April 8, 2009

Dear Sir,

Sub: Application for the post of Senior Piping Designer - PDMS

I am having 11 ½ years of experience in the preparation of Piping layouts, Equipment layouts, Piping isometrics, pipe supports, Stress calculation, Pipe thickness calculation , Tie-in Schedule and detailed fabrication, support drawings for upstream Oil, Onshore, Offshore, Gas, Power and petrochemical plants.

I am herewith sending my detailed resume for the post of Senior Piping Designer - PDMS for your kind perusal.

Expecting a favorable reply from your organization.

Thanking you

Experience Summary
CB&I Global Engineering Services – Ajman, UAE Feb.2007 to Till date

Piping Designer
Pearl GTL Project - Qatar
Preparation of Equipment layout, piping general arrangement, Piping isometrics extractions, Pipe support detailing, Tie-in drawings for Shell Pearl GTL Project Tankage area using PDMS 11.6 and MDS.

TECHNIP Middle East, Qatar Aug. 2006 to Feb. 2007

Piping Designer ( Deputed to Maersk Oil Qatar – QATAR)
AL Shaheen Offshore Field Development Project 2005 (FDP 2005) – Maersk Oil Qatar
Preparation of Equipment layout, Piping general arrangement, Piping Sectional views, Piping isometrics, Pipe support detailing, Tie-in Schedule and detailed material take-off for offshore platforms (BA, HA, GA & IA) for Maersk Oil Qatar’s field development project (FDP 2005).
SembCorp Engineers and Constructors Pte Ltd, Singapore Feb.2006 to June 2006

Piping Designer

CA MAU 1 - 750MW Combined Cycle Power Plant – Vietnam

Preparation of Plot Plan, Equipment layouts, Piping general arrangement drawings, detailed isometric drawings and pipe support drawings for 750MW Combined Cycle Power Plant for Petro Vietnam .

Tecnicas Reuindas S.A, Kuwait Jan. 2005 to Dec.2005

Piping Designer

GC-28 Capacity Expansion for Compression and Medium Crude Processing

Preparation of Plot Plan, Equipment layouts, Piping general arrangement drawings, and detailed fabrication drawings like isometrics and detailed pipe support drawings for their Capacity expansion project for GC-28 Crude Oil Gathering Centre for Kuwait Oil Company (K.S.C) Kuwait.

Tebodin Middle East Ltd, Abu Dhabi Dec.2003 - Nov 2004

Piping Designer

Jubail Port Expansion Project – KSA (Sabic Terminal Services Co.)

Preparation of Piping general arrangement drawings, Equipment layouts,P&Ids, support detailing and isometric preparation for their Jubail Port expansion Project.


Jaleha Degassing Station & Fahahil Main Oil Pump Station – Qatar (Qatar Petroleum)

Preparation of Piping general arrangement drawings, Equipment layouts,P&Ids, support detailing and isometric preparation for the Jaleha degassing, Fahahil Main oil pump and new vapour blower areas for Qatar Petroleum.
Deputed to Tebodin & Partner L.L.C Oman.(Nov.2004)

Preparation of Piping general arrangement drawings, Equipment layouts and isometric preparation for their MSCP oil terminal facility project for Oman Refinery Company.


Dodsal Pte Ltd, Dubai Nov 2002- Oct 2003

Assistant Engineer Design

Preparation of pipe stress analysis for main steam lines, support design, Preparation of Pipe thickness calculation. Preparation of Fabrication Isometrics, and making detailed support drawings. Checking and finalization of Piping MTO, Co-ordinating with the client for getting approval of drawings.


Shuweihat S1 Power and Water Project - Abu Dhabi,AL-Shuweihat

• Checking of Fabrication, Erection, and Support detail drawings for 1 x 1500 MW combined Cycle Power Plant coming up at AL-Shuweihat Abu Dhabi.

Spic JEL Engineering Construction Ltd, Madras, India June 1996 to Oct 2002

Piping Designer

Detailing of Power, Petrochemical and Gas Plants and responsible for preparation of piping general arrangement drawings, Piping isometrics, supports & bill of materials using Auto Plant, AutoCAD, and N-BOPPS software.
Projects Summary

Kuwait National Petroleum Company – Kuwait

• Deputed to Gulf Spic Engineering LLC-Kuwait (August 2002-Oct 2002)

Preparation of Piping general Arrangement, support detailing, preparation of valve pit drawings for the Kuwait National Petroleum Company’s Oil Gathering centre at GC-6 and GC-11.

Ruwais Fertilizers – Abu Dhabi

• Involved in preparation of Piping, general arrangement drawings, detailed fabrication and support drawings for the 4 bar absorber system for their revamping project.

Tarong North Power Station:

• Preparation and checking of Piping general arrangement drawings, preparation of Support, Fabrication and Erection drawings for 1 x 450 MW coal fired Power Plant at Nanango, Australia using N-Bopps (Software developed by IHI Japan for making isometrics from general arrangements)

Callide Thermal Power Plant, Australia:

Detailing of 2 x 420 MW coal fired power plants at Central Queensland, Australia

• Involved in preparation and checking of Piping general arrangement and detailed piping fabrication, erection, support drawings and material take off.

Rojana & Sahacogen Power Company, Thailand:

Detailing of 2 x122 MW power plants at Sriracha and Ayutthaya, Thailand.

• Involved in preparation of detailed construction drawings for the main steam system, circulating water and feed water systems and auxiliaries.


Major projects include:

• Shell Pearl GTL Project (Qatar)
• AL Shaeen Offshore Field Development Project 2005- FDP 2005(Qatar)
• GC-28 Crude Oil Capacity Expansion project (Kuwait)
• Jubail Port Expansion project (KSA)
• Jaleha Degassing station and Fahahil Main Oil pump station (QATAR)
• AL Shuweihat S1 Power and Water Project. (UAE)
• Ruwais Fertilizers, Abudhabi (UAE)
• Ravaa Satellite Gas Development project, India
• Polyplastics Asia Pacific SDN, BHD., Malasiya (MP-1 Chemical Project)
• Tarong North Power Station, Australia
• Callide Thermal Power Plant, Australia
• Rojana & Sahapathana cogen plant, Thailand

Diploma in Mechanical Engineering (1996)

Computer skills:

Software PDMS 11.6 – (Equipment, Design, Draft & Iso draft Modules), MDS
Auto Plant 13.51, AutoCAD R-2006& R-2007, Caesar II Ver 4.40,

Other Applications MS Office

MS office