CV QC Inspector

Resume built for oil and gas job opportunities by a jobseeker with experience in QC Inspector - would you like to offer this candidate a job/contract employment?

CV/Resume ID no.: 75771
Last Updated: Tuesday, September 4, 2007

As someone with an extensive background in Quality Assurance/ Quality Control, Integrated Management Systems establishment, documenting and implementing. Also, with extensive exposure in the different industry standards i.e ASME, API, ASNT related to Forging of Flanges my objective is to apply the above position which would allow me to share my experiences and knowledge in you respected Company

PRECISION FORGING FACTORY
Dammam Industrial City 2,
Kingdom of Saudi Arabia

Period : March 2006 to Present

Position: Superintendent – Quality Assurance, NDT & MR

In addition to my previous work load, the following are included as primary responsibilities as follows:

• Ensure timely NDT testing of Flanges required for testing i.e. UT, MT and LT
• Oversee the whole operation of NDT area including manpower allocation.
• Ensure calibration of all measuring equipment and testing equipment as per calibration plan.

Period: Mar. 2005 ~ March 2006

Position: QA ENGINEER/Management Representative

Job Description
 In charge of the over-all activities of QA/QC within the Shop Floor / production area. Also, maintaining the implementation of Quality Management System ISO 9001:2000

Responsibilities
 To ensure that all process done in the production area are in accordance with the specified requirements by the Customer.
 Make sure that non-conforming products had been treated properly, and quarantined as necessary.
 To convene a quality meeting on matters that need to be discussed with concerned production people.
 Ensure that all drawings are updated by coordinating the Engineering section
 Make sure that materials (Carbon Steel / Stainless Steel) used for production is correct.
 Facilitate third party inspection with Client inspectors e.g. ARAMCO, JGC, Phoceene, Snamprogetti, Bechtel and other Customers inspector.
 Ensure effective implementation of our QMS
 Prepares Internal Audit plan and schedule for regular intervals as required by ISO standard
 Facilitate, Management Review Meeting in the absence of General Manager

YI PHONE SUBIC BAY CORPORATION
#3 Aim High ave., cor. Braveheart Street
SBIP-1 Subic Bay Freeport Zone, Olongapo City Philippines
Period: December 2003 ~ Present

Position: QA/QC Head; Internal Quality Auditor (IQA) Team Leader
Safety Officer

Job Description: QA/QC Head
- In-charge in the whole operation of Quality Assurance/Quality Control throughout the Company.

Responsibilities:

 Supervise and monitor all the activities within the Company with regards to the implementation of Quality control.
 Checks the entire equipment/test instrument used in the production if those are all within the range.
 Set a standard samples accept/reject as reference during inspection
 To communicate directly to the supplier on any defective parts received both local and imported parts.
 To coordinate directly with the customer with regards to the Quality complaint
 To inspect and evaluate on all incoming materials prior for use to Production
 To inspect and evaluate the Finished Products prior for shipment.
 To conduct training to QA/QC inspectors on the use of Statistical Process Control (SPC).
 To conduct evaluation/accreditation of Suppliers
 To review and approve all QA/QC reports, procedures, standard operating procedures (SOP) for updates and revisions if deem necessary

IQA (INTERNAL QUALITY AUDIT) TEAM LEADER

Job Description:

- In charged in Planning, Implementing and Monitoring of Quality, Environment and Health & Safety (QEHS) Management System.

Responsibilities:

 To prepare the audit plan
 To schedule the audit in accordance with the Internal Quality Audit procedures.
 To preside the opening & closing meeting during the audit.
 To monitor the development of the audit, which is also conducted by some of the IQA auditors
 To summarize the result of the audit in terms of conformance & non-conformances.

SAFETY OFFICER

Job Description

- Over all in-charged in the Health and Safety programs within the Company.

Responsibilities:

 To establish a plan for the Health & Safety program in the Company
 To conduct a company wide training/awareness on the health and safety policy of the Company
 To prepare a monthly Health & Safety program to be submitted to the local health and safety office as requirement.
 To conduct regular safety inspection for all safety gadgets, with regards to its usability and availability. Also, to assist the health & safety condition within the Company.

KENTZ BOTSWANA (PTY.) LTD.
Plot 6397 Lejara Road, Broadhurst industrial
Gaborone, Republic of Botswana; Southern Africa
Period: Nov. 2002 ~ Dec. 2003
Position Held: QA/QC Officer

Job description:

- In charged in the Establishing, Implementing and Monitoring the Quality Management System (QMS) to all projects.
- Internal auditing of all projects with regards to QA/QC activities on Site
- In-charged in determining Quality requirements for each project both Electrical and Mechanical Installation.

Responsibilities:

 Upon awarding the project to KENTZ, I should say to it that I could have the copy of the project specification for me to be able to determine the necessary documentations to prepare. Normally, KENTZ can execute the project both Mechanical & Electrical projects.
 To prepare all Quality requirement for Mechanical Works installation. The following Mechanical Works requirements as follows but not limited to:
 To prepare a Quality plan for every projects prior to its construction.

 To conduct orientation to all project personnel in meeting the objectives and targets of the projects.
 To prepare the specific work Instructions for each projects based on the scope of work specified in the specifications. The Project/Construction managers prior to its issuance to site should approve the work instructions.
 To monitor the effectiveness & clarity of the work instructions as against the specifications.
 To conduct project audits during the course of construction, to ensure that effective implementation of the system is followed as required.

 To ensure that all drawings available on-site are current and controlled to ensure the quality of the job.
 To implement effective Document Control both in the Head Office and to all construction sites.
 To prepare all the documentation/manuals required by the standards prior for the certification.
 To prepare the following documents/manuals, such as the following:

YI PHONE SUBIC BAY CORPORATION
#3 Aim High ave., cor. Braveheart Street
Subic Bay Industrial Park Phase 1;
Subic Bay Freeport Zone – Olongapo City
Period: March 2000 ~ October 2002
Position Held: QA/QC Head; Admin. Head; QMR

QA/QC Head

Job Description
- In-charge in the whole operation of Quality Assurance/Quality Control as well as the Establishing, Implementing and Monitoring the ISO 9001:2000 Quality Management System throughout the Company.

Responsibilities:

 Supervise and monitor all the activities within the Company with regards to the implementation of Quality control.
 Checks the entire equipment/test instrument used in the production if those are all within the range.
 Set a standard samples accept/reject as reference during inspection
 To communicate directly to the supplier on any defective parts received both local and imported parts.
 To coordinate directly with the customer with regards to the Quality complaint
 To inspect and evaluate on all incoming materials prior for use to Production
 To inspect and evaluate the Finished Products prior for shipment.
 To conduct training to QA/QC inspectors on the use of Statistical Process Control (SPC).
 To conduct evaluation/accreditation of Suppliers
 To review and approve all QA/QC reports, procedures, standard operating procedures (SOP) for updates and revisions if deem necessary

Admin. Head

Job Description
 In-charged in the whole operation of Admin. Section. Also, for the manpower allocation of all department.

Responsibilities
 To facilitate all instruction from Taiwan, with regards to the operation of the Company.
 To report directly to President.

 To supervised the admin. Section in the following:
1. Hiring of new employees
 Responsible to oversee the activities of the whole Company from Admin., Production area, Production Engineering to Warehouse Department.
 To monitor the Process of the Production as will as to the flow of Raw Materials and its availability.

 My duties are to coordinate with our mother company in Taiwan in terms of Production Forecasts, Materials needed either in Office or in the Production.
 Responsible to report directly to the President for the daily and monthly activities of the company.
 Responsible to coordinate with our local suppliers of Production materials etc.
 Responsible to call a meeting with the STAFF to discuss with them the Plans for the next Week or Month Production.
 Responsible to monitor the activities of all departments with regards to their daily output.
 My duty is to coordinate with our counterpart in Taiwan and to our Broker here in SBMA regarding our IMPORT/EXPORT activities.

MANAGEMENT REPRESENTATIVE (MR)

Job description

- In-charged in the Establishing, Implementing and Improving the Quality, Environmental Management Systems.

Responsibilities

 To prepare all the necessary documentation necessary for the implementation of ISO Standards. The following are the lists of documents needed:
 To conduct a company wide orientation specifically for the awareness of ISO 9001:2000 QMS; ISO 14001:1996 EMS.
 To supervise the Internal Quality Audit as preparation for the certification audit.
 To preside the Management Review meeting after the Internal Quality Audit
 To act as a liaison of the Company for the external meeting/conference with regards to quality.
 To act as a company representative during the certification audit to be conducted by external or third party auditor.

MONITRONICS INC.
#8 South 6th Road KEPZ
Kaoshiung, Taiwan ROC
Period: January 1995 ~ March 2000
Position Held: Asst. QA Engineer

Job Description
- In charged in the evaluation, inspection and analysis of incoming materials, finished products and returned products from customer.

Responsibilities

 To assist the Engineer in doing the Job that is related with QUALITY
 Responsible to evaluate new Product prior for Mass Production.
 Responsible to evaluate the defective units send back by our customer and to make a CORRECTIVE ACTION.
 To conduct an IPQC, FQC, FQA, IQA and OQC inspection both in Production area and in the QA section.
 Responsible to conduct a daily “Reliability Testing” for each lot per Model of our product prior for shipment.

INDUSTRIAL PRODUCTION & DISTRIBUTION SYSTEM
Jeddah; KSA
Period: April 1994 ~ August 1994
Position Held: Field Engineer

Job description

- In-charged in the whole operation of Field installation of CATV using direct Satellite Disc Antenna.


Responsibilities

 Responsible for “On Site” evaluation of various SATELLITE reception factors including Satellite Look Angle, Terrestrial Interference Identification.
 Responsible for the Installation of Head End and Dish Antenna, Site signal distribution and Cable Layout.
 Responsible for preliminary planning of manpower and Materials utilization ensuring quality works results.
 Report directly to the area manager for the accomplishment done.
 Communicating with client regarding the quality of our services as well as the effectiveness of our product.

DAE RYUNG IND., (Phil) INC.
Cavite Export Processing Zone
Rosario, Cavite
Period: June 1993 ~ April 1994
Position Held: IQC Engineer

Job description

- In-charged to all activities with the IQC section, especially all incoming materials Import or local purchased materials.

Responsibilities

 To ensure that all incoming Materials from our supplier both local and imported shall be in good condition and within our required specification.
 Responsible to monitor in the Production Line after the Materials were issued, in order to intercept the defective materials/parts that may cause delay in the Production.
 Responsible to make a report and Feedback immediately to the supplier any defective parts received for replacement or for repair if necessary.
 Responsible to coordinate with the supplier regarding defective parts for possible improvements.

TEMIC (Telefunken Microelectronics)
FTI. Taguig Metro Manila
Period: November 1991 ~ June 1993
Position Held: IQC Inspector

Job Description

- To inspect all incoming materials prior for usage to production.

Responsibilities

 Responsible to check all incoming materials from our supplier both local and imported materials.
 To ensure that Electronics and Mechanical parts shall be inspected based on our criteria of inspection. Semiconductor parts shall be randomly checked if it is good or reject.
 Responsible for an “on-site” inspection in our supplier.

Professional Licensed:

 Registered MECHANICAL ENGINEER - Reg. No.: 0043756

Academic Qualifications:

 Bachelor of Science in Mechanical Engineer

Achievements:

 Last December 2006, myself as an MR we are successfully certified in Integrated Management Systems i.e. ISO 9001:2000 and OHSAS 18001:1999 by TUV.
 Had successfully completed the IRCA approved ISO 9001: 2000 Auditor/Lead Auditor Course
Certificate No. 05/S/QMS3/1744
 Able to certify the Integrated Management Systems (ISO 9001:2000; ISO 14001:1996 & OHSAS 18001:1999) of YI PHONE SUBIC BAY CORPORATION through AJA Registrars Inc. last Dec. 5 ~ 6, 2004 as a QMR, EMR, PCO and Health and Safety Officer aside from my regular work as the QA/QC Dept. Head.
 Took the “Philippine Educational Placement Test” acceleration exam. and was promoted from first year High School to College.
 Able to certify the YIPHONE Quality Management System by TUV Products under my supervision based on ISO 9001:2000 Standards.

Software Knowledge:

MS Word
MS Excel;
MS PowerPoint
JDE management networking
Familiar in ERP systems

none