CV QA/QC Inspector

Resume built for oil and gas job opportunities by a jobseeker with experience in QA/QC Inspector - would you like to offer this candidate a job/contract employment?

CV/Resume ID no.: 75822
Last Updated: Friday, September 14, 2007

Over Thirteen (13) years experience in fabrication and erection of oil, gas, chemical, petrochemical and pharmaceuticals projects. (Structural, Piping, Pipelines, Pressure Vessels, Storage Tanks, Jackets and Living Quarters etc.)

Experience Profile:

• Preparation of Welding Procedures, Procedures Qualification Records.
• Witnessing Procedure/ Performance Qualification Test.
• Materials verification, Fit-up Inspection, Dimensional Inspection & Visual Inspection.
• Welding Process Control like Filler Materials, Backing gas, Pre-heat, and Inter-pass Temp etc.
• Preparation of inspection reports.
• Radiography film Viewing and Interpretation.
• Review of NDT reports.
• Day-to-day inspection and Co-ordination.
• Identifying and preparation of hydro test packages.
• Preparation of QC Documentation for test packages.
• Pre hydro test line walk and Punch list preparation.
• Re-instatement line walk and Punch list preparation.
• Conducting Hydro Testing, Pneumatic Testing and Vacuum Testing.
• Holiday Testing, Painting / Coating Inspection.
• Witnessing of Insulation / Cladding Inspection.
• Interpretations and evaluation of test results as per Codes and Standards.
• Documentation for regular inspection activities.
• Submission of post-project documentation.
• Familiar to interpret the following international codes:
▪ ASME SECTION– II, V, VIII & IX.
▪ ASME B31.3 AND AWS D1.1
▪ API 620, 650, 653 & 1104
• Inspection of Oil, Gas, Petrochemical and Refinery (Static and Rotating) equipment like Pressure Vessels, Heat Exchangers, Boilers, Reactors, Storage Tanks, Compressors, Pumps and Valves etc.
• Knowledge in the field of PMI, MFL, IRIS, RFEC, Eddy Current and Borescope.

From 1st March 2007 To Present:

COMPANY : Mobiz Pte Ltd., Singapore.
M/S Siemens Pte Ltd., Singapore.
Designation : QA/QC Inspector
Project : Adriatic LNG Project (EIB)

Responsibilities:
a. Material, Fit-up, Dimensional, Welding and Visual Inspections.
b. Radiography Film interpretation.
c. Maintain the QC data base and continuously monitoring all the activities welding progress, Welders performance, Quality and NDE activities as per specification requirement and prepare the reports.
d. Attending QA/QC meeting to discuss all the quality related activities and progress as well.
e. Submission of post-project documentation.



Project profile: The project is constructed by M/S SIEMENS Singapore, designed and executed by AKERKVAERNER/ EXXON MOBIL.

From 5th September 2006 To 28th February 2007:

COMPANY : Rotary IMC Pte Ltd., Singapore.
Designation : QA/QC Engineer
Project : Huntsman Singapore Plant JAU-R

Responsibilities:
a. Preparing WPS, PQR, ITP, NDT Summary, Hydrostatic test procedure, Pneumatic test procedure, Vacuum test procedure and etc.
b. Conducting Welder Qualification Test.
c. Radiography Film interpretation
d. Review of NDT reports.
e. Day-to-day inspection and Coordination..
f. Conducting Hydro testing, Pneumatic testing and Vacuum Testing.
g. Maintain the QC data base and continuously monitoring all the activities welding progress, Welder Performance, Quality and NDE activities as per specification requirement and prepare the reports.
h. Attending QA/QC meeting to discuss all the quality related activities and progress as well.
i. Submission of post-project documentation.

Project profile: The project is constructed by M/S JACOBS ENGINEERING Singapore.

From 25th October 2005 To 4th September 2006:

COMPANY : Setsco Services Pte Ltd., Singapore.
M/S Jurong Consultants Pte Ltd., Singapore.
Designation : Engineering Inspector
Project : Bulk Liquid Products Terminal on Jurong Island.

Responsibilities:
a. Material, Fit-up, Dimensional, Welding and Visual Inspections.
b. Witnessing Welder Qualification Test.
c. Radiography Film interpretation.
d. Review of NDT reports.
e. Day to day Inspection and Coordination.
f. Pre-hydro test line walk and Punch list preparation.
g. Reinstatement line walk and Punch list preparation.
h. Witnessing Hydro testing, Pneumatic testing and Vacuum Testing.
i. Maintain the QC data base and continuously monitoring all the activities welding progress, Welder Performance, Quality and NDE activities as per specification requirement and prepare the reports.
j. Attending QA/QC meeting to discuss all the quality related activities and progress as well.
k. Submission of post-project documentation.

Project profile: The project is constructed by M/S PUNJ LLOYDS LTD AND PLANT ENGINERING Singapore, designed and executed by HORIZON SINGAPOR PROJECTS PTE LTD/ EMIRATES NATIONAL OIL COMPANY LTD.



From 23rd October 2002 To 15th June2005:

COMPANY : NDT & Corrosion Control Services., KSA & UAE.
Designation : QA/QC Inspector/ Welding Inspector

Projects / Sites Involved:

• Worked as Welding Inspector at SAFCO, Jubail during their shutdown.

Responsibilities:
a. Visual and Welding Inspection on Reactor and Pressure vessels.
b. Witnessing Dye Penetrant Testing.
c. Preparation of inspection reports.
d. Witnessing Hydrostatic testing

• Worked as Welding Inspector at SAMAD Jubail during turnaround.

Responsibilities:
a. Visual and Welding Inspection on Reactor, Pressure vessels and Heat Exchanger.
b. Witnessing Dye Penetrant Testing.
c. Preparation of Inspection reports.
d. Witnessing Hydrostatic testing

• Worked as Welding Inspector at Suedrohrbau Saudi Arabia Ltd. Haradh.

Project: Haradh Gas Gathering Manifolds & Transmission Pipelines.
Client: Saudi Aramco

Responsibilities:
a. Material, Fit-up, Dimensional, Welding and Visual Inspections.
b. Radiography Film interpretation.
c. Review of NDT reports.
d. Witnessing Hydro testing.
e. Maintain the QC data base and continuously monitoring all the activities welding progress, Welder Performance, Quality and NDE activities as per specification requirement and prepare the reports.
f. Submission of post-project documentation.

• Worked as Third Party Inspector for Velosi Certification LLC at Amiantit Group, Dammam.

Responsibilities:
a. Visual Inspections on FRP Vessels.
b. Witnessing Hydrostatic testing
c. Preparation of inspection reports.

• Worked as Inspection Engineer at Sabtank, Jubail.

Responsibilities:
a. Performed inspection and corrosion survey on the pipelines.
b. Ultrasonic Thickness measurements on pipelines.
c. Preparation of inspection reports.

• Worked as Inspection Engineer at IBN-Rushed, Yanbu during turnaround.

Responsibilities:
a. Visual and Welding Inspection on Reactor, Pressure vessels and Heat Exchanger.
b. Witnessing Dye Penetrant Testing.
c. Witnessing Hydrostatic testing.
d. Preparation of Inspection reports.

• Worked as QC inspector at NPCC - Dass Island - Abu-Dhabi.

Project: Major over all of crude oil storage tank7 & 11.
Client: ADMA-OPCO.

Responsibilities:
a. Material, Fit-up, Dimensional, Welding and Visual Inspections.
b. Radiography Film interpretation.
c. Review of NDT reports.
d. Witnessing Hydro testing.
e. Maintain the QC data base and continuously monitoring all the activities welding progress, Welder Performance, Quality and NDE activities as per specification requirement and prepare the reports.
f. Submission of post-project documentation.


• Worked as Inspection Engineer at SABIC - R&D - Riyadh.

Responsibilities:
a. Visual Inspections on Heat Exchanger.
b. Witnessing Dye Penetrant Testing.
c. Preparation of Inspection reports.

• Worked as Third Party Inspector at MHI-Ghazlan Power Plant II.

Responsibilities:
a. Visual and Welding Inspections on Piping.
b. Preparation of inspection reports.

• Worked as Welding Inspector at Al-Zamil Metal Works Factory, Khafji.

Project: Replacement of bottom plate crude oil Storage tank TK-122.
Client : Kuwait-Gulf Oil Company.

Responsibilities:
a. Material, Fit-up, Dimensional, Welding and Visual Inspections.
b. Radiography Film interpretation.
c. Review of NDT reports.
d. Witnessing Hydro testing.
e. Maintain the QC data base and continuously monitoring all the activities welding progress, Welder Performance, Quality and NDE activities as per specification requirement and prepare the reports.
f. Submission of post-project documentation.

• Worked as Third Party Inspector for Velosi certification LLC at Al-Mutlak Metal Industries, Jeddah.

Responsibilities:
a. Material, Fit-up, Dimensional, Welding and Visual Inspections.
b. Review of Inspections reports.
c. Witnessing Hydro testing.
d. Painting / Coating Inspection.
e. Preparation of inspection reports.

• Witnessing Welder Qualification Test for Al-Ghamdi Est. - Ras-tanura.

• Witnessing Welder qualification Test for Abdullah Al- shuywar. - Dammam.

• Worked as Third party inspector for Velosi certification LLC at Arabian pipe coating co, Jubail.

Responsibilities:
a. FBE Coating Inspection.
b. Preparation of Inspection reports.

• Witnessing Welder Qualification Test for Consolidated Contracting Company, Yanbu.

• Worked as a welding inspector at Al-Khathlan Est, Yanbu.

Project: Yanbu refinery process area ESD &marine control system replacement.
Client : Saudi Aramco.

Responsibilities:
a. Material, Fit-up, Dimensional, Welding and Visual Inspections
b. Preparation of inspection reports.
c. Review of NDT reports.
d. Witnessing Hydro testing.


From 27th July 1997 To 10th May 2001:
COMPANY : Express Engineering Pte Ltd., Singapore.
M/S Sembawang Marine Off-shore Engineering Pte Ltd., Singapore
Designation : QA/QC Inspector

Responsibilities:
a. Material, Fit-up, Dimensional, Welding and Visual Inspections.
b. Preparation of Inspection report.
c. Day to day Inspection and Coordination.
d. Pre hydro test line walk and Punch list preparation.
e. Reinstatement line walk and Punch list preparation.
f. Conducting Hydro testing, and Pneumatic testing.
g. Maintain the QC data base and continuously monitoring all the activities welding progress, Welder Performance, Quality and NDE activities as per specification requirement and prepare the reports.

h. Attending QA/QC meeting to discuss all the quality related activities and progress as well.
i. Submission of post-project documentation.

Projects Involved:

1. Project: Al Shaheen development project consisting of well head platforms.
Client : Maersk Oil Qatar.

2. Project: Yetagun field Development platform.
Client : Premier Petroleum Myanmar Ltd.

3. Project: Laminaria and Coralina Development Floating Production Storage & Offloading Facility.
Client : Woodside Australian Energy.

4. Project: Malampaya Deep Water Gas to Power Project.
Client : Shell Explorer, Philippines.

5. Project: Sincor Down Stream Project.
Client : Contrina, Venezuela.

6. Project: Bayu-Undan Gas Recycle Project.
Client : Philips Petroleum, Australia.

From 5th May 1995 to 20th June 1997:
COMPANY : Monofix Agro Products Ltd., Dharwad, India.
Designation : Piping Engineer

Responsibilities:
a. Preparing Process Piping Welding and Inspection Procedure, Hydrostatic test procedure, Pneumatic test procedure and etc.
b. Production Planning, Production Scheduling.
c. Identifying and preparation of hydro testing test packages.
d. Pre hydro test line walk and Punch list preparation.
e. Reinstatement line walk and Punch list preparation.
f. Conducting Hydrostatic testing and Pneumatic testing.
g. Continuously monitoring all the fabrication and erection activities.
h. Updating daily progress.
i. Attending Daily Construction meeting to discuss all the fabrication and erection activities.
j. Documentation of Records.

From 1st May 1992 to 25th April 1995:
COMPANY : Southern Herbals Ltd., Bangalore, India.
Designation : Supervisor

Responsibilities:
a. Supervising all the Fabrication, Erection and Installation activities.
b. Production Planning, Production Scheduling.
c. Updating daily progress.

d. Pre hydro test line walk and Punch list preparation.
e. Reinstatement line walk and Punch list preparation.
f. Conducting Hydrostatic testing and Pneumatic testing
g. Attending Daily Construction meeting to discuss all the fabrication and erection activities.

Educational Qualification:

GRADUATION NAME OF THE INSTITUTION BOARD/UNIVERSITY YEAR OF PASSING
Diploma in Mechanical Engineering V.M.K.V.S.S. POLYTECHNIC, State Board of Technical Education
( D.M.E ) Salem, India. April 1992

State Board of Technical Education
H.S.C Govt. Boys Higher Secondary School State Board of Tamil Nadu, India. March 1990
S.S.L.C Govt. Boys Higher Secondary School State Board of Tamil Nadu, India. April 1988

Technical Qualification:

COURSE YEAR OF PASSING
American Welding Society (AWS)-Certified Welding Inspector (CWI No: 01072231) July 2001
Radiographic Film Interpretation ASNT Level- II June 2005
Radiographic Testing ASNT Level- II June 2005
Ultrasonic Testing ASNT Level- II June 2005
Magnetic Particle Inspection ASNT Level- II June 2005
Liquid Penetrant Testing ASNT Level- II June 2005

Package : MS-Office 2000, Autocad

Inspection of Oil, Gas, Petrochemical and Refinery (Static and Rotating) equipment like Pressure Vessels, Heat Exchangers, Boilers, Reactors, Storage Tanks, Compressors, Pumps and Valves etc.
• Knowledge in the field of PMI, MFL, IRIS, RFEC, Eddy Current and Borescope.