CV Off shore oil/gas field operator, Well head operator, Plant operator, DCS Control room operator

Resume built for oil and gas job opportunities by a jobseeker with experience in Off shore oil/gas field operator, Well head operator, Plant operator, DCS Control room operator - would you like to offer this candidate a job/contract employment?

CV/Resume ID no.: 76018

Presently i am working in Sudan, Greater Nile Petroleum Operating Company on-shore oil field. At present i am working as a control room operator last 5 years. I have good experience in oil & gas process field. My rotational cycle is 35/35. I would like to work in ON/OFF cycle. I would like to work "Control Room Operator" or Production operator or Process operator or Field operator.

Total Work Experience : 15 Years experience in Oil & Gas field

1. Presently working as a CONTROL ROOM OPERATOR for GNPOC Onshore Oil field in SUDAN through IPEDEX MIDDLE EAST, since 10.07.2002.

2. Worked as a FIELD OPERATOR for GNPOC Onshore Oil field in SUDAN through DIETSMANN global technologies, from 09.12.2001 to 09.07.2002.

3. Worked as a PLANT OPERATOR for OIL INDIA LTD., Onshore Gas field in RAJASTHAN through OFS INDUSTRIES PVT.LTD. From 20.03.1998 to 30.11.2001.

4. Worked as a TECHNICIAN for ONGC LTD., Mumbai offshore Oil & Gas field through S.S.CONSTRUCTION from 18.02.1997 to 09.03.1998.

5. Worked as a SENIOR ASSISTANT for ONGC LTD., SURAT-HAZIRA Onshore I.G. & Air Compressor plant through PRASHANT ENGINEERING CORPORATION from 19.08.1995 to 07.02.1997.

6. Worked as a PRODUCTION OPERATOR for ONGC, MUMBAI Offshore Oil & Gas field through Classic Engineers from Sept. 1992 to July. 1995.
ROLE AND SCOPE:

To operate shutting down / starting-up the processing plant assigned to an Offshore / Onshore platform for collection, treatment & inward transmission to consumers of oil & gas. To mix chemicals, prepare the plant for routine / planned maintenance and carry out first line maintenance. The plant includes: Water injection facilities, gas injection facilities with separation facilities with OIL & GAS Separators and gas treatment plants with associated equipment such as: dehydrators, scrubber’s booster pumps, main oil line pumps, skim oil pumps, risers ….. Etc.


MAIN DUTIES & RESPONSIBILITIES:

I. To tour to the Oil processing plant, Natural gas dehydration plant, Crude stabilization plant, Booster pump station, MID point pump station, Gas injection plant, Water injection plant, Glycol regeneration plant to every one hour to monitor performance and ensure efficient operation according to prescribed conditions.
II. To record in a log sheet operating data such as: flow rates, pressure, temperature, levels … etc, of each Module including Separators, Scrubbers, Gas header, Pumps, Compressor, Reboiler, Heater. To report to Production Supervisor abnormal readings recommending appropriate remedial action. To implement approved ones immediately.
III. To operate including starting-up / shutting down the plant and adjusting associates gauges to maintain the required levels, flow rates pressure and temperature. Preparing for pig launching and receiving operation.
IV. To prepare the plant for maintenance when required, accompanies the Instrument / Mechanical / Electrical Technicians to explain defects / defaults ensuring safe preparation of equipment for routine planned maintenance and test such repaired equipment to ensure smooth efficient operation.
V. To inform supervisor for requesting stores stock items / chemicals necessary for operating the plant, checks consignment and endorses loading / delivery notes. Maintain adequate house – keeping according to company’s safety regulations.
VI. To carry out simple laboratory tests to confirm the quality of plant products (oil, water, gas) and to help to evaluate plant performance such as water quality tests, crude salt, gas dew point, oil water cut, glycol pH … etc.
VII. To mix chemicals to appropriate ratios and to prepare doses for injection into process streams whenever required. Calibrate and stroke adjustment of the chemical pump.
VIII. To carryout planned inspection and safety tours to identify unsafe conditions and practice, classify equipment from hazard point of view. To prepare machinery and equipment for maintenance in accordance with safety regulations and to maintain adequate standard of housekeeping through out the plants.
IX. To perform other related duties such as collecting oil, water and gas samples carrying out first line routine service e.g. greasing, lubricating, adjusting glands, tightening loose connections, changing filters …. Etc. Producing weekly chemicals stock / consumption reports …. Etc.
X. To inform supervisor to issue work permits like cold work permit, hot work permit along with the certificates like electrical isolation certificate, gas test certificate, radioactive certificate, excavation certificate, scaffolding certificate, lift certificate, ground disturbance certificate, … Etc.
X1. To conduct monthly fire drill & safety meeting at FPF sent the reports to supervisor.
Keep all the Records as per the ISO-14001 (EMS) environmental management system & run the plant as per ISO-14001 standard.

Educational Qualification : Diploma in Mechanical Engineering
Higher Secondary Course
Professional Training:

1. Survival at Sea course in Mumbai.
2. Completed basic fire fighting training conducted by fire Officer and controller of ONGC offshore NQO OIL & GAS processing platform in India.
3. Completed Defensive Driving Course – DDC conducted by Standard Road Safety Trainers – Malaysia in GNPOC Onshore oil processing complex in Sudan.

Computer proficiency : Diploma in Computer Application.
Microsoft word, Excel

Light motor vehicle license holder
Sea survival course certificate holder
Good typing speed English & Tamil (60 wards per minute) over personal computer.