CV experience in petrochemical and refinery plant

Resume built for oil and gas job opportunities by a jobseeker with experience in experience in petrochemical and refinery plant - would you like to offer this candidate a job/contract employment?

CV/Resume ID no.: 76073
Last Updated: Tuesday, September 18, 2007

RESPECTED SIR,
I came to know through reliable sources that your organization is going to recruit person for operation for various projects.
I have total 10 years experience in pre-commissioning, commissioning, start up and normal operation of refinery and petrochemical operations in 10 PROJECTS. in India and GULF countries like QATAR .
At present i am working with QATAR PETROLEUM , if you have any vacancy in your esteemed organization for suitable post then please let me come to know,i will try to prove my ability.
i have attached here with my resume for your ready reference so please go through it and atleast call for interview i will try my best.

Professional Experience

HIGHLIGHTS:
9 Years experience in pre-commissioning & commissioning and normal operation of refinery and petrochemical operation in PROJECTS. Expertise in including Hydro treating of Diesel/Kerosene/Naphtha, Hydrogen production, Hydrogen Sulfide Recovery, Molecular extraction (MOLEX) of kerosene, Benzene extraction by ED Sulfolane.
APRIL-2006 TO UNTIL
PROCESS OPERATOR

Location QATAR
Company QATAR PETROLEUM (SEEF LIMITED)
Project HYDROTREATING,N-PARRAFIN AND LAB
A • Working with QATAR PETROLEUM (SEEF LIMITED) for 3 PROJECTS for LAB,N-PARAFFIN and BENZENE EXTRACTION in 2006 and now working for normal operation of same unit in QATAR.
• I have worked with NIRMA LTD for 3 PROJECTS (1997 TO 2006)like LINEAR ALKYL BENZENE in 1997, N- PARAFFIN in 1999and HYDROGEN in 2000 under L&T in INDIA.
LAB Complex, having capacity of manufacturing 75000 MTPA of Linear Alkyl Benzene(DCS Plant) and 65000 MTPA N-Paraffin(DCS Plant) using latest eco-friendly technology from Ms. UOP Inc. U.S.A. Also, Hydrogen Plant(DCS Plant) having capacity of 2200 NCMH. supplied by Ms. Linde Process Technology.
Job Description *Thorough knowledge in review & analysis of PFD & P & ID.
*Experience of pre commissioning & commissioning activities like *Hydrotesting, flushing, drying, Nitrogen purging, final Box-up, Acid pickling, etc.

Commissioned LAB Plant (Linear Alkyl Benzene) (lic by UOP) & N-Paraffin (lic by UOP) and Hydrogen Plant(by Hydrochem).
Presently, working in N-paraffin plant.
Thorough knowledge in review & analysis of PFD & P & ID.
Experience of pre commissioning & commissioning activities like Hydrotesting, flushing, drying, Nitrogen purging, final Box-up, Acid pickling, etc.
Commissioning of:
Hydrotreater Reactor.
Natural draft Charge Heater(by M/s.Thermax)of N-Paraffin Plant.
Four Stage high pressure Hydrogen Service Reciprocating Compressor(IHI, Japan) of N-Paraffin Plant.
Liquid Ring Vacumm Pump(LRVP).
High pressure Sundyne Pumps.
Distillation columns.
Sour Water Stripper(Sulphur removal).
Hydrotreator Reactor catalyst loading(Dense loading).
Naptha Reformer catalyst loading.
Balanced Draft Fire Heater with latest BMS system(burner management system), Air preheater & low Nox Burner supplied by Foster Wheeler, Canada having heat duty of 56MM Kcal/Hr.
Various types of centrifugal and reciprocating pumps.
Handled entire plant operations like Prefractionation, Unionfining, Molex, Kerosene & Naptha Desulphurisation, etc. Responsible for the safe operation, safe start-up & shutdown of the plant.
Operating Experience:
At present, working in Prefractionation & Unionfining (Sulphur and Nitrogen Removal) and section of N-Paraffin Plant. In this plant, handling following types of equipments & columns:
Vacuum Column & Stripper Column.
Natural Draft Charge Heater.
High pressure and High speed SUNDYNE pump.
High Pressure Hydrogen Services Reciprocating Compressor
Plunger Pump
Hydrotreated Reactor
Sour Water stripper(sulphur removal).
Various types of centrifugal & reciprocating pumps.

Operating experience of the following process of LAB Plant, N-Paraffine Plant & Hydrogen Plant:
UOP-Prefractionation Unit:- High temperature (140-245°C) & low pressure stripping reaction from kerosene feed & getting Heart Cut (C10 TO C13).
UOP-Unionfining UnitHydrotrating Unit:- High temperature (311-375°C) & High pressure (85 ksc) gas & liquid mixed phase hydrogenation reaction using Ni- Mox catalyst for kerosene desulphurisation for removing sulphur, nitrogen, metals, oxygen, halides & olefin saturation. The hydrotreater consists of multiple reactor beds with inlet diffuser, top liquid distributor tray, quench zone & outlet collector for two phase(gas-liquid) flow regime.

UOP-Molex Unit:- Selective absorption (physical) of N-Paraffin at moderate temperature (177°C) & pressure (25 Ksc) from sweetened Kerosene using molecular sieves. It is simulated moving bed system with solid absorbent moving upward & liquid moving downward using UOP patented rotary valve, governed by Absorbent Chamber Control System(ACCS).
Catalytic Steam Reforming Reaction (Hydrogen Plant):- High temperature (800-865°C) & High pressure (25 Ksc) Naptha reforming reaction using Ni-catalyst for hydrogen production. Naptha is being treated for sulphur removal with hydrodesulphuriser unit.
Sour Water Treatment:- Hydrogen sulfide & ammonia recovered from sour water (collected from “Hydrotreator Unit”) & used as fuel gas in hot oil heater & treated water is being used as condensate water & in hydrotreator unit for dilution of salt.

UOP PACOL Unit:- High temperature (465-505c) & low pressure gas phase dehydrogenation reaction using platinum on alumina catalyst for paraffin conversion to olefin.

UOP Define Unit:- Moderate temperature (180-220c) & high pressure (36ksc) liquid phase hydrogenation reaction using Ni-Mox catalyst.

UOP BENZENE EXTRACTION UNIT: Benzene extraction with extractive distillation using sulfolane as a lean solvent.
Special Achievement:
Involved in pre-commissioning, commissioning & start-up activities of N-Paraffin Plant & Hydrogen Plant.

Commissioning of UOP-Prefractionation, Unionfining Units, PACOL, PEP of LAB Plant and N-Paraffin Plant.

Commissioning activities include equipment assembling catalyst loading, reactor filling, absorber chamber filling, dry out of catalyst beds, dry out of charge heater refractory, etc.

Distillation columns, heat exchangers, fin-fan coolers inspection.

Pumps water run & m-seal conversion.

Loop filling with hydrocarbon & cold circulation of hydrocarbon.

Start-up of various pumps & compressors.

Charge Heater(Union Fining) commissioning

Commissioning of Hot Oil Heater:
Hot oil heater is supplied by M/s Foster Wheeler Ltd. - Canada, having capacity of 57 mmkcal.

Commissioning activities including radiation, convection section, hot oil surge drum erection, tubes installation, burners installation & inspection, FD fan, ID fan installation.

Heater dryout & Loop filling with hot oil.

Commissioning of IHI Compressor (IHI-Japan, Reciprocating Compressor).

Compressor boxup.

Acid pickling of suction and discharge line.

Commissioning of lube oil circuit.

Compressor heat run.

Compressor start up.

Critical Equipments / Instrumentation Handled:
Atmospheric & vacuum distillation columns.
Unionfining (Hydrotreator Unit) with high pressure and high flow sundyne pumps.

31301 NM3/HR & 3974 NM3/HR Multistage Reciprocating Compressor (IHI Japan).

Molex Unit with ACCS(Adsorber chamber control system) & co-planner manifold indexer - Rotary Valve.

Balanced draft process Fire Heater (57 MMKCAL) with BMS panel, air preheater and low NOx Burners supplied by Foster Wheeler Calgary, Canada.

Liquid ring Vacuum Pumps (LRVP) Hibon Canada.

High speed, high pressure(SUNDYNE) Japan.

Various kinds of instruments like flow meters, thermo couples, pressure transmeters, lever transmeters, control valves, online analyzers, etc.

Critical Liquid Handled:
Kerosene, Benzene, N-Pentane, naptha, N-Paraffin, Iso-octane, linear alkyl benzene, Liquefied Petroleum Gas, Furnace Oil.
Job Title : PROCESS OPERATOR
Job Description. : commissioning and operation of equipment and units of lab plant and n-paraffine plant.my role as a commissioning operator. iwas taken fully responsibility of precommissioningctivities like hydrotesting,flushing,punch list dilution,leak testing,purging, acidpickling,andcommissioning activities like header charging,heater dryout, sulfiding of catalyst,evacution of unit etc

Professional Training:
Fire & Safety Seminar Attended:
Indian Petrochemical Corporation Ltd.
Fire & Safety Classroom Training
Firefighting Pumps & Equipment (Field Training)
Permit to Work System and other Safety System.


Educational Background

Jun 1997
Location : Dabhoi
Institute : Gujarat University
Description : B.Sc. Chemistry

basic

n/a