CV Instrument and Control Engineer (Offshore, Onshore) with 10 years experience

Resume built for oil and gas job opportunities by a jobseeker with experience in Instrument and Control Engineer (Offshore, Onshore) with 10 years experience - would you like to offer this candidate a job/contract employment?

CV/Resume ID no.: 76238
Last Updated: Tuesday, February 2, 2010

Dear Sir

It is pleasure and honor to apply for the above mentioned position and to submit to you my resume.

I'm a Engineer have 10+ years of experience in Oil & Gas a Reputable petroleum and petrochemical Industrial Company, I became Very interested for working Offshore & Onshore In general. I have gained considerable Practical experience in Installation, Commissioning, Maintenance, Troubleshooting and Operating of Complicated instrument, automation and Control Systems for Oil and Gas industry with both major Petroleum Companies in Egypt
I hope you may favorably consider my application and would very please to meet you at your convenience.

Mar. 2007 - Present: Instrument & Control Engineer, Inspection Electrical Engineer
Saqqara Project British Petroleum ( BP )
Installation, Commissioning, Inspection, Start up Instrumentation, Control and automation Systems
* PMT ( Project Management Team )
* Ensuring technical queries from the contractor or other are solved.
* Working close with the contractor to Complete H.V, L.V, instrument, automation and Control
Equipment to a high Specification. according to KBR Engineering and standard
* Supervision of Petrojet (Const. Egyptian Co.) and other subcontractor.
* Inspection of electrical construction activities
* Participation in P & ID and process controls development
* GOC ( Guidance on Certification )
Guidance on Certification has been developed as a management control system for
inspection and test (I&T) activities associated with fabrication, construction, pre-commissioning,
commissioning and maintenance of systems being worked upon and handed over for
operations. GOS as best practice for BP Projects

Aug. 2001 – Mar. 2007: Instrument , Control & automation Engineer
Gulf Of Suez Petroleum Company ( GUPCO )
British Petroleum ( BP )
Installation, Commissioning, Maintenance, Troubleshooting and Operating of
Complicated instrument, automation and Control Systems in petroleum (offshore,
Onshore) and Industrial Environment
* Programmable logic controllers PLC , DCS
Siemens Simatic S5 115u, 135u, 150u,
Siemens Simatic S7 300u, 400u (STL, SCL)
* Good Dealing with (LDR ladder, STL statement list)
* Beginner with SCL (Structured Control Language)
* Good Dealing with Siemens S7 Software
* Good Dealing with Industrial Communication
- Industrial Ethernet
- PROFIBUS ( DP )
- AS- Interface
* PLC Software using (Siemens S5, S7)
* ASI (Actuator Sensor Indicator) System
* Working on MCC (Motor Control Cabins)
* Read & Understanding Engineering Drawings such as
- P & IDs, ( Process & Instrumentation Diagrams )
- SLD's, ( Electrical Single Line Diagrams )
- Loop Drawing,
* Measuring and Instrumentation Control Systems
Pressure, Heat, Level, Distance, ESD, SDV, photocell, limit, proximity Switches … etc)

# Rehabilitation and Implementation Maximo 5.3 System
* I&C Engineer Planning & Data Analysis ( Maximo System; Work Group Engineers)
* Working on CMMS (Computerize maintenance management system) ( Maximo )
* Upgrade Maximo 5.3 project maintenance Gulf of Suez Company

1. Data gathering for all Ras Shoukeir field locations ( more than 105,000 equipment).production
facilities, all machineries and Equipments field (Off/Onshore) from Process & Instrumentation
Diagrams (P&ID's), Electrical Single Line Diagrams (SLD's), Electrical Switchboards, MCC
Schedules, Vendors Manuals , Data Sheets and Site Visit
2. Build asset hierarchy based on as built, (P&ID's) Process and instrumentation drawings and
Incorporating into CMMS and ensure static date quality.
3. Knowledge of maintenance disciplines. Instruments / Electrical / Mechanical
Equipment t used in oil and gas industry plan/ schedule all maintenance activities
4. Create and Monitor WO Work Order, PM preventive maintenance, CM Corrective
Maintenance, JP Job plans and inspection programmed implementation.
5. Develop preventive maintenance Programmed and ensure implementation through
Computerized maintenance management system (CMMS)
6. Monitor Preventive Maintenance and Inspection Programmed Implementation.
7. Develops Divisions long and short term action plan in the line with company’s business
Plan, implementation & follow up of programmers/ progress reports / performance
Measures that contribute to the reduction of maintenance cost and production loses.
- Rehabilitation and Implementation Maximo 5.3 System
Identified, implemented systems and processes to meet the Needs of the business
department Supported Development of Area, site and procedures, processes, plans and
strategies Integration with staff during change processes


Oct. 1998 – 2001: Automation Engineer
ICOPACK, EGYWRAP, COPACK Petrochemical Companies Group
Shift Engineer (Maintenance)
Chief Shift Engineer (Maintenance)
Egyptian Companies For Petrochemical Raw Materials Packaging – A Leader Company
For Biaxial Oriented Polypropylene (B.O.P.P). Which Contains The Most Advanced Technology
In Control, Instrument And Measuring Systems

* Maintenance, Troubleshooting and Operating of Complicated instrument, automation and
Control Systems for Petrochemical Industrial Environment
* Supervision from early construction to final testing, start up and commissioning of plant
systems, including instrument, automation, Control Systems and L.V motor control circuits
* Part of the project management team with the responsibility for the inspection of electrical
Subcontractors and nationals. Completion and Commissioning of New 2 Production line
(EGYWRAP, COPACK )
* Programmable logic controllers PLC
Siemens S5 115u, 135u
* Good Dealing with (LDR ladder, STL statement list)
* Good Dealing with Siemens S5 Software
* SCADA System
* Fix Dmax32
* Fix Paradyme
* working on MCC (Motor Control Cabins)
* Variable speed control
DC D / A drives Motor Siemens (6RA23, 6RA24.and 6RA70)
AC D / A drives Motor Siemens (FVC, SC and MC series)
* Thickness gauge measuring systems (thin layer Sheet -10-40 µ) such as
- X-Ray. ( Scantech system France Company )
- Radiation-Ray. ( FAG system Germany Company )
* Metalizing machine
(A very high tech. Machine to cover BOPP a very thin layer of evaporated aluminum)
DCS system controlling the winding system, Evaporator system, thickness measuring
- Galileo Vacuum Company
- VALMET General Company

Nov. 1997 – 1998: Electronics Engineer
Inter. Communication & Electronic Company ( Telecomp )
Electronic system design and technical for trainer

* FPGA (field programmable gate array) ACTEL
* FPIC (field programmable interconnect component) APTIX
* EPAC (electrical programmable analog circuit)

May. 1996 – 1997: Security, CCTV , Fire& Gas Alarm Systems Engineer
Germany International Company ( IBCOL )
Work With Armed Forces, Internal Ministry
* Security System , Access code
* CCTV System (1 to 128 Camera)
* Addressable fire alarm control panel (1 to 4 Loop)
* Conventional fire alarm control panel (1 to 64 Zones)

B.Sc. Instrument and Control Engineering 1997
Faculty Of Engineer - Helwan University - Cairo - Egypt

- Windows & Most of Microsoft Applications
(Word , Excel , Power point , Access , Outlook…etc)
- P.L.C Program (SIEMENS lang. S5 & S7)
- Maximo 5.3 Program
- CMMS Computerize Maintenance Management System

•Ability to understand specifications and contract documentation.
•ability to work well both independently , virtual and culturally diverse within a team environment
•Strong interpersonal / coordination skills and the ability to engage multifunctional groups.
•Demonstrated ability to handle competing priorities and persistence to overcome obstacles
•Ability to prepare, analyze and interpret technical presentations
•Knowledge of Engineering codes, standards and practices is a necessity to evaluate planning requirements for engineering projects.