CV Marian, Smart Plant Materials, Spec writer, Material Management

Resume built for oil and gas job opportunities by a jobseeker with experience in Marian, Smart Plant Materials, Spec writer, Material Management - would you like to offer this candidate a job/contract employment?

CV/Resume ID no.: 76909

Dear Sir,

I am writing in response to your listing on Oil Offshore Marine for the position of Marian Systems Consultants. After reading your job description, I am confident that my skills along with my experience are the right match for the position advertised.

You may kindly note that I posses over 15 years of experience in Piping Material Management on various projects involving Chemical, Petrochemical, Power Plant and Oil and Gas. I am being considered as a Material management expert for Technip Group. Presently I am working in Technip Paris.

I would welcome the opportunity to further discuss this position with you. I have enclosed my resume for your kind perusal and I look forward to hearing from you.

JAN 06 TO TODATE TECHNIP FRANCE (PARIS)
PIPING MATERIAL ENGINEER - SPEC WRITER - MARIAN SUPERUSER

Responsible for :
Preparation of piping classes and, specification activities for the EPC project.
Support and training of Marian piping End users, Preparation of training documents, testing of new service packs, help desk support, preparation of improvement plans… etc.
Preparation of PDS RDB files like, PCD, SDD, SDL, Brach tables…etc
Set up of MARIAN software for piping MTO control/preparation of material requisitions.
Support to PDS and Marian end users.

MAR 96 TO JAN 06 TECHNIP ABU DHABI (10-YEARS)
PIPING MATERIAL ENGINEER - SPEC WRITER – MARIAN SUPER USER

Main Project Involved
- NEB – North East Bab (EPC)
- Dalia – FPSO Topsides (EPC)
- GASCO RUWAIS FACILITIES UPGRADING PROJECT (EPC)
- BP / ARCO -
AL RAYYAN OIL DEVELOPMENT PROJECT- QATAR (FEED / EPCM)
- AKPO - FPSO Topsides (EPC)

Responsible for :
 All piping specification activities for the EPC project.
 Piping specifications, piping class summary, piping material specification, purchase specification for piping bulk and valves, valve data sheets, data sheets for piping special parts, based on SHELL DEP/MESC specification requirements.
 Preparation of piping construction standard.
 Set up of MARIAN software for piping MTO control/preparation of material requisitions.
 Support to PDS designers for missing components.
 Preparing piping bill of quantities (BOQs) for piping fabrication/erection, painting and insulation to evaluate piping construction cost/evaluate the construction contractors offers.
 Preparation of piping material requisitions for piping bulk, valves and special piping materials.
 Technical bid evaluation and recommendation on the offers received for piping items. Prepare purchase requisitions.
 Coordination with vendors, review and approval of vendors documentation and drawings.
 Coordination with piping designers.
Co-ordination with site and clarify the queries from site related to materials aspects.

JAN 00 – DEC 02 Main Project Involved
- SHELL EXPLORATION PROJECT
SOROOSH AND NOWROOZ INTEGRATED DEVELOPMENT PROJECT
- GASCO RUWAIS FACILITIES UPGRADE PROJECT INCLUDING SULPHUR RECOVERY PROJECT (PROPOSAL / FEED / EPC)

Responsible for :
 All piping specification activities for the EPC project.
 Piping specifications, piping class summary, piping material specification, purchase specification for piping bulk and valves, valve data sheets, data sheets for piping special parts, welding specification, piping construction specification, specification for painting, hot and cold insulation etc., based on SHELL DEP/MESC specification requirements.
 Preparation of piping construction standard.
 Set up of GMINI software for piping MTO control/preparation of material requisitions.
 Preparation of piping material requisitions for piping bulk, valves and special piping materials.
 Technical bid evaluation and recommendation on the offers received for piping items. Prepare purchase requisitions.
 Coordination with vendors, review and approval of vendors documentation and drawings.
 Coordination with other disciplines, for the issues related to piping materials.
 Proposing the alternatives to reduce the cost i.e. cost effective proposals.
 Assisting the costing department in preparation of commercial proposal.
 Preparation of Bill of quantities for piping fabrication/erection, painting, insulation and underground facilities to evaluate construction cost.
 Reviewing/Technical bid analysis of proposal for Sulphur Recovery package unit and clarification to the queries from bidders.

JAN 98 – DEC 00 ADNOC
RUWAIS SULPHUR HANDLING PROJECT (FEED / PMC)

Responsible for :

 All piping specification activities during Basic and Detailed Engineering of project.
 Piping specifications, piping class summary piping material specification, valves data sheets, welding specification, piping construction specification. Specification for Jacketted piping and steam tracing.
 Preparation/checking of plot plans, piping GA drawings, piping construction standards, jacketted piping details.
 Piping MTO for estimation purpose.
 Technical evaluation and recommendation of technical bids for the EPC tender for sulphur handling projects.
 Technical support to the contractor during execution of the project and checking of the documents/drawings prepared by the contractor.

SEPT 97 – NOV 99 ADGAS
EPCM SERVICES FOR JETTY LNG AT DAS ISLAND (EPCM)

Responsible for :

 Piping material requisitions.
 Purchase specifications for pipes, fittings flanges, gasket bolting and valves cryogenic service.
 Preparation of requisition, Technical bid analysis and drawings.

JUL 97 – OCT 98 ADMA-OPCO
ZAKUM GAS INJECTION PROJECT (EPCM)

Responsible for :

 All piping specification activities during basic and detailed Engineering of project.
 Piping specifications, piping class summary piping material specification, valves data sheets, welding specification, piping construction specification to set up for the project on GMINI software for MTO control and piping material requisitions.
 Technical bid analysis and preparation of purchase requisitions.
 Vendor drawing review/approval and co-ordination with vendor.
 Co-ordination with site and assist to solve the site problems.

OCT 96 – JUL 97 ZADCO/NPCC
DALMA AND HAIR DALMA FIELDS DEVELOPMENT PROJECT (EPCM)

Responsible for :

 Piping specifications - Piping material specifications, valve specification and data sheets, purchase specification for valves, pipes and fittings, piping construction specification, welding specification for piping.
 Material requisitions, inspection and test plan for piping items.
 Technical bid evaluation and technical recommendation report for valves and piping items.
 Piping material (MTO) control using GMINI software.

OCT 96 – DEC 96 TOTAL ABK
FIRE WATER NETWORK UPGRADING OF CENTRAL COMPLEX (DETAILED ENGINEERING)

JUL 96 – OCT 97 ADMA-OPCO
ADMA-OPCO DAS & US3 EFFLUENT MONOPOD TOWER PROJECT (DETAILED ENGINEERING)

JUN 1993 – FEB 1996 ABB SAE SADELMI (ASEA BROWN BOVERI)

SENIOR MECHANICAL CAD COORDINATOR

AL TAWEELAH POWER & DESALINATION PLANT

 Preparing piping general arrangement drawing, Piping and Instrumentation (P & ID) Drawing, Isometric Drawings, Bill of Quantities, Fabrication Drawings for steel platforms, Coordination of Drawings, Under ground Layouts and all sketches required for site construction.

MAR 1992 – JUN 1993 BECHTEL INTERNATIONAL

SENIOR MECHANICAL AND CAD COORDINATOR

 Preparation of general arrangement drawings, Isometric drawings, Bill of Quantities, Piping & Process diagrams, Fabrication drawings, coordination of Civil, Electrical & Mechanical Drawings, As-built drawings for P & ID and mechanical equipment layout drawings.

JAN 1991 – MAR 1992 RIZZANI DE ECCHER

ENGINEER

ASAB FLOW ANALYZERS AND AUTO FIRE PROTECTION SYSTEM IN DAS ISLAND PROJECT
 Preparing Civil, Structural drawings sections, elevations and detailed drawings for building construction. And also central aircondition drawings including duct and pipe designing and incharge for computer maintenance.
 Electrical and Instrumentation detail drawings, P&ID diagrams, cable schedule, as-built drawings etc.
 Work involved in Drainage drawings, fabrication and installation of process platforms, marine and gas pipe lines and all detailed drawings for site construction.

JAN 91 – MAR 92 COREX SERVICES

ENGINEER

 Design of Ducts, Pipes, layout drawings, sections, riser diagrams etc.

EDUCATIONAL AND PROFESSIONAL AFFILIATIONS

 Certified as Material management Expert and Member of Expert group in Technip.

 Diploma in Mechanical Engineering

 Diploma in Computer
 DOS 6.22, Windows, Excel, Word, Autocad, Microstation, ISO-Cad, Pro-Flow, Pro-ISO etc., All ABB and Technip Engineering Programmes.

 Very good knowledge PDS and SP3D. Trained in all modules of PDS and SP3D.
 Trained on All type of PDS RDB files generation through Material management programmes.
 Conversant with all type of PDS and SP3D RDB problems.

 Trained On Alias I-Sketch Package On Isometric Drawing/ Customization.

 Very Good knowledge of MARIAN Ver.5.5.3 and 6I) (Piping Material Management Tool)
 Administration Modules.
 MLCL Modules.
 BOM Module.
 Interface with PDS / PDMS / SP3D.
 REQ Modules.
 Site Module (only used for construction team support)
Worked as Marian System Super user. Job includes support to end users, Preparation of training documents, help desk support, testing of new service packs, Preparation of improvement plans…………etc.

EDUCATIONAL AND PROFESSIONAL AFFILIATIONS

 Certified as Material management Expert and Member of Expert group in Technip.

 Diploma in Mechanical Engineering

 Diploma in Computer
 DOS 6.22, Windows, Excel, Word, Autocad, Microstation, ISO-Cad, Pro-Flow, Pro-ISO etc., All ABB and Technip Engineering Programmes.

 Very good knowledge PDS and SP3D. Trained in all modules of PDS and SP3D.
 Trained on All type of PDS RDB files generation through Material management programmes.
 Conversant with all type of PDS and SP3D RDB problems.

 Trained On Alias I-Sketch Package On Isometric Drawing/ Customization.

 Very Good knowledge of MARIAN Ver.5.5.3 and 6I) (Piping Material Management Tool)
 Administration Modules.
 MLCL Modules.
 BOM Module.
 Interface with PDS / PDMS / SP3D.
 REQ Modules.
 Site Module (only used for construction team support)
Worked as Marian System Super user. Job includes support to end users, Preparation of training documents, help desk support, testing of new service packs, Preparation of improvement plans…………etc.

Conversant with relevant Piping codes and standards like ANSI/ASME,BS & IS.

Trained from Milan (Italy) about the ABB Material Management System.

Over 15 years of experience in piping design and engineering of chemical, petrochemical, refinery, power plants and FPSO projects. Covering piping material specification (metallic and non-metallic materials), technical evaluation of vendor bids, vendor drawing review, piping material take-off (MTO) using computerised system (GMINI and MARIAN Software) and preparation of purchase requisitions as per the BOM quantities.