CV Piping Engineer with 6 years experience

Resume built for oil and gas job opportunities by a jobseeker with experience in Piping Engineer with 6 years experience - would you like to offer this candidate a job/contract employment?

CV/Resume ID no.: 76947
Last Updated: Saturday, December 15, 2007

I am currently residing here in Bahrain. I have worked as a Piping Engineer for almost 6 years now and I'm still aiming more to develop myself in my career.

After I finished my engineering degree, I was employed as a Operations Technician in Shell Philippines Petroleum Company for almost 6 months period. I transfered to JGC Philippines Inc. where I develop my career as a Piping Engineer for 5 years of working experience. I have a strong background in oil and gas industry as well as in the field of mechanical engineering, and I strongly believe that I could apply my combination of knowledge and experience to be a good help in your company.

 Bahrain District Cooling Company B.S.C. (C)
Tabreed Bahrain
Kingdom of Bahrain
Piping Engineer
July 2007– Present
 Primarily review all related drawings, documents, specifications of contractor which regards to the design of district cooling (large central chiller plants), district cooling distribution systems (piping, etc.) and other items pertaining to district cooling system.
 Coordination project engineering activities with the project Client, subcontractors and consultants.
 Provides technical assistance to the Project Deputy Manager and keeps them informed on matters relating to quality control.
 Attend installation of large scale district cooling plant works. Establishes with the Subcontractors, procedures on testing, installation and turnover of the various systems. Aware of Subcontractor priorities for mechanical installation.
 Check mechanical and electrical works and ensure quality compliance to procedures.
 Review and check vendor document information.
 Reviews the Subcontractors Project Schedule.

 JGC Corporation
Low Sulphur Diesel Production Project (Construction Period)
The Bahrain Petroleum Co. (BAPCO), Kingdom of Bahrain
Field Piping Engineer/Supervisor
August 2005 – June 2007
 Co-ordinate all Site Piping Engineering activities and ensure they are proceeding to the correct level of quality and to Schedule.
 Primarily resolves all piping problems by field change sheet preparation encountered during construction phase.
 Perform line checking to check the quality of all piping system.
 Attend pressure testing of piping system.
 Attend Review Meeting with client to show construction progress development of the project.
 Review all field changes required by the client.
 Executes field take offs from IFC drawings and provides input for quantity tracking.
 Verifies installed quantities reported by the Subcontractors.
 Respond to and closes out Mechanical Contractor Technical Clarifications and queries and ensures Mechanical Contractor complies with Site safety requirements.
 Check and Review all PDS generated as built isometric and plan drawing.
 Revised isometric and plan drawing using PDS to incorporate all field changes for final As-Built issuance to the client.
 Review and advise Client on third parties compliance with all Client and company codes and standards.
 Determines the scope of any piping areas not shown on the normal piping drawings, such as package unit interconnection piping, and lubrication systems on equipment.
 Monitors the offsite spool fabrication to coordinate the proper priority flow of spools to the site.
 Also maintains updated delivery schedules from the fabricator.
 Prepare detail schedule for tie-in works on existing BAPCO Refinery (Revamp Area).

Low Sulphur Diesel Production Project - Revamp Area (Survey Period)
The Bahrain Petroleum Co. (BAPCO), Kingdom of Bahrain
Assistant Piping Key-Person
June 2004 – July 2004/ September 2004 – December 2004
 Verify tie-in location.
 Verify piping route on actual location.
 Verify piping information of any possible interference with existing facilities.
 Finalize all piping engineering deliverables necessary for construction period. (e.g. tie-in location map, tie-in BQ, piping plan drawing, and piping isometric drawing).

Low Sulphur Diesel Production Project - Revamp Area (Detailed Eng’g Period)
The Bahrain Petroleum Co. (BAPCO), Kingdom of Bahrain
JGC Phils.Inc
Assistant Piping Key-Person
June 2004 – August 2005
 Prepare piping layout based on conceptual layout done during site survey using AutoCAD.
 Review and check the work of CAD technicians, support staff and junior engineers.
 Check Piping Layout in 2D Cad format.
 Check Piping Isometric in 2D Cad format.
 Prepare Piping Information such as stress calculations, loading calculations, structural information to Civil Dept.
 Perform Material Take-off (MTO) based on piping isometrics.
 Coordinate with Client and other Engineering Discipline for proper exchange of design information to finish engineering phase on schedule.

Low Sulphur Diesel Production Project (Proposal Period)
The Bahrain Petroleum Co. (BAPCO), Kingdom of Bahrain
JGC Phils.Inc
Piping Engineer
June 2004 – August 2005
 Prepare Man-Hour estimate based on no. of deliverables for No. 2 HDU Revamp Work Area.
 Prepare piping conceptual routing based on ITB documents.
 Prepare list of deliverables for piping scope of work.
 Studies ITB to know scope of work, and other project-related documents such as overall project schedule, basic design data, client specification, client standard drawings, existing drawings, and plot plan.

Batangas Refinery Conversion Project
Caltex (Philippines), Inc., Batangas, Philippines
JGC Phils.Inc
Piping Engineer – Assistant Piping Key Person
October 2003 – April 2004
 Studies ITB to know scope of work, and other project-related documents such as overall project schedule, basic design data, client specification, client standard drawings, existing drawings, and plot plan.
 Perform site survey activities such as verifying tie-in location, conceptual routing, interference and other activities that are required for the project.
 Prepare detailed layout for piping around tanks (off-site area) using AutoCAD.
 Prepare detailed layout for fire fighting facilities using AutoCAD.
 Loading Calculation of pipes for the preparation of pipes supports and sleepers.
 Preparation of Piping Information for Inter-Discipline Correspondence.
 Coordination with the Client and other Engineering Discipline for proper exchange of design information.
 Perform Material Take-off (MTO) based on material sketches and P & ID.

Petron Energy Efficiency Project
Petron (Philippines), Inc., Bataan, Philippines
JGC Phils.Inc
Piping Engineer – Area Piping Key Person (APS-2 Area)
June 2003 – October 2003
 Studies ITB to know scope of work, and other project-related documents such as overall project schedule, basic design data, client specification, client standard drawings, existing drawings, and plot plan.
 Perform site survey activities for the preparation of piping layout around Heat Exchangers and Pipe rack.
 Prepare plan and isometric drawings of piping layout in 2D CAD format.
 Loading Calculation of pipes for the preparation of pipes supports and sleepers.
 Preparation of Piping Information for Inter-Discipline Correspondence.
 Coordination with the Client and other Engineering Discipline for proper exchange of design information.
 Perform Material Take-off (MTO) based on material sketches and P & ID.

D&E Firewater Gap Project
Pilipinas Shell Petroleum Corporation (PSPC), Batangas, Philippines


JGC Phils.Inc
Piping Engineer – Piping Key Person
April 2003 – June 2003
 Study project specification, client design standards, and approved P&ID for proper checking of plan drawings.
 Overall checker of piping plan drawing (firefighting facilities).
 Coordination with the Client and other Engineering Discipline for proper exchange of design information.
 Prepare manual isometric drawing for Material Take-Off Preparation.
 Prepare Final Material Take-Off for procurement and construction.
 Prepare Progress Report of the Project (Piping Scope)

TGU Project
Pilipinas Shell Petroleum Corporation (PSPC), Various PSPC Oil Depot
JGC Phils.Inc
Piping Engineer
March 2003 - April 2003
 Assist immediate senior engineer in the preparation of piping layout.
 Prepare plan and isometric drawings based on approved P & ID in 2D-CAD format.
 Check “For Construction” isometric drawings for MTO preparation.
 Prepare Final Material Take-Off for procurement and construction.

Bitumen Import Facilities Project
Pilipinas Shell Petroleum Corporation, Rizal, Philippines
JGC Phils.Inc
Junior Piping Engineer
February 2003 – March 2003
 Assist immediate senior engineer in the preparation of piping layout.
 Revisions of plan and isometric drawings based on revised P & ID in 2D-CAD format.
 Check “For Construction” isometric drawings for MTO preparation.
 Prepare Final Material Take-Off for procurement and construction.

K2U Project
Thai Polyacetal Co., Ltd., Thailand
JGC Phils.Inc
Junior Piping Engineer
January 2003 – February 2003
 Check field change sheets given by field engineers.
 Revisions of plan and isometric drawings based on field change sheets using PDS for As-Built issuance.
 Control of Field Change Sheets.

MLNG-TIGA Project
Petronas MLNG Tiga, Malaysia
JGC Phils.Inc
Junior Piping Engineer
December 2002 ~ January 2003
 Assist immediate senior engineer in the production of isometric drawings for construction purpose.
 Check “For Construction” isometric drawings against check prints for final issuance.
 Revisions of plan and isometric drawings based on field change sheets using PDS for As-Built issuance.
G1 Project
Asia Silicones Monomer LTD., (ASM), Thailand
JGC Phils.Inc
Junior Piping Engineer
November 2002 – December 2002
 Assist immediate senior engineer in the production of isometric drawings for construction purpose.
 Check “For Construction” isometric drawings against check prints for final issuance.
 Revisions of plan and isometric drawings based on field change sheets using PDS for As-Built issuance.

KOC Crude Export Facilities Project (Proposal Project)
Kuwait Oil Company (KOC), Kuwait
JGC Phils.Inc
Junior Piping Engineer
October 2002 – November 2002
 Studies ITB, project and design basis such as scope of work, overall project schedule, basic design data, client specification, client standard drawings, existing drawings, and plot plan.
 Check draft isometric drawings for Material Take-Off preparation.
 Prepare Material Take-Off for BM/BQ preparation.
 Prepare of Bill of Materials and Bill of Quantities for Man-Hour estimate.
Cadetship Training for Piping Engineers
JGC Philippines Technical Training Course
Ayala Alabang, Muntinlupa City, Metro Manila, Philippines
Cadet Piping Engineer
April 2002 – October 2002
 Technical training on Basic Knowledge for Piping Layout. Basically to develop a thorough knowledge of the codes and standards and a good understanding of offshore engineering practices applicable to topsides equipment layout and piping design for oil and gas facilities.
 Technical training on Piping Arrangement around Pumps, Piperack, Pipe Sleeper, Heat Exchanger, Tanks and other plant equipments.
 Technical training on the interpretation for Piping and Instrument Diagram.
 Technical training on PIMS and PMS (Material Management System).
 Technical training on Basic Piping Stress Analysis.
 Technical training on Plant Design Software (PDS).
 Technical training on Plant Design Management Software (PDMS).
 Technical training on Bentley Microstation SE Software.
 On-the-Job Training
 Plan and Isometric Drawing preparation using AutoCAD.
 Material Take-Off and Material Management Software Input.
 Material Sketch preparation.
 Manhour Estimation for proposal project.
 Bill of Materials/Bill of Quantity preparation.
 Pilipinas Shell Petroleum Corporation
Pililla Refinery
Brgy. Malaya Pilillia Rizal, Philippines
Process Operations Technician
November 2001 – April 2002
 Pilot Training on Different Refinery Equipments and Instruments (e.g. pumps, compressors,exchangers, towers, valves, gauges etc.).
 On-the-Job Training on troubleshooting of different refinery equipment.
 Capable of Commissioning and Decommissioning of different refinery equipment such as Pumps, Exchangers, Compressors, and Furnaces during shutdown and start-up period.
 Panel Board reading of Flow Data (Pressure, Temperature & Volume).
 Product sampling of Methyl-Ethyl Ketone Dewaxing Unit (MDU).

SEMINARS AND TRAININGS ATTENDED
 Cadetship Training for Piping Engineer
JGC Philippines Inc.
JGC Phil. Bldg., 2109 Prime St., Madrigal Business Park
Ayala Alabang, Muntinlupa City, Metro Manila, Philippines
April – October 2002

 Apprenticeship Training
Pilipinas Shell Petroleum Corporation
Pililla Refinery
Brgy. Malaya Pilillia Rizal, Philippines
November 2001 – April 2002
 Seminar on AutoCAD Release 2000
Philippine Society of Mechanical Engineering-UE Student Society
Engineering Building,UE Caloocan Campus
Caloocan City, Philippines
July 2000
 Lecture Series on Basic AutoCAD
Philippine Society of Mechanical Engineering-UE Student Society
Engineering Building, UE Caloocan Campus
Caloocan City, Philippines
August 1999


EDUCATION
 University of the East – Caloocan Campus
Caloocan City, Philippines
June 1996 - May 2001
• Consistent Department of Science and Technology Scholar (DOST for 5 yrs.)
 Juan Sumulong Memorial Junior College
Taytay Rizal, Philippines
June 1992 - March 1996
 Sta. Ana Elementary School
Taytay Rizal, Philippines
June 1986 - March 1992

PDS, Microstation, Autocad, AutoPlant, Smartplant, Caesar, MS Office.

Field Piping Engineering