CV Structural PDMS/CADD Designer

Resume built for oil and gas job opportunities by a jobseeker with experience in Structural PDMS/CADD Designer - would you like to offer this candidate a job/contract employment?

CV/Resume ID no.: 77490
Last Updated: Monday, December 17, 2007

Respected sir,
I am writing from Dubai.
I have been in the Oil / Gas and associated petrochemical Industry for over 10 years. During this period I have gained considerable experience in Cad Design Drafting and detailed designing of Civil / structural steel on a variety of Offshore and Onshore projects.
During this period I have been responsible for the Civil / Structural steel 3D Modeling, Design drafting, Detailed designing, Heavy Lifting / Stacking / Flipping / Load out drawings for Onshore & Offshore structures like Oil / LNG storage plants, Topsides, Jackets, Bridges, FPSO Modules, Spar hulls, Access platforms and other Miscellaneous structures

Now I am searching a job where i can express my all technical knowledge and skills for a challenging job.
Hope you will contact me if you have any vacancy which suits to my experience.

Experience

Sr. Civil / Structural PDMS Designer –
CB&I Eastern Anstalt,(Chicago bridge & Iron) Global Engineering Center, Ajman . Dubai, U A E.

From March 2007 to Till Date

Duties and responsibilities of position include the Modeling / Preparation / Development of Oil &LPG storage plant layouts and Civil / structural study drawings during the conceptual design stage and produce detailed design drawings under the direct Supervision of Principal Design Engineers.
Prepare Civil / Architectural drawings, RCC Drawings, Structural Drawings, Standard drawings for each project, produce 2D drawings from PDMS 3D model, check the clash and prepare clash report


 Major Projects and Nature of works Completed & Involving

• Shell Pearl GTL – (Shell Pearl GTL LNG Storage plant for Shell Qatar.)

 Producing Primary standard drawings
 Prepare Modeling and or inputs to PDMS model
 Preparing Under & Above ground civil structures, Foundations, columns
 Preparing Design draft for platforms including stairs, handrails & Ladders



Sr. Structural Designer / Design / Construction Draftsman –
J. Ray McDermott Middle East Inc. Dubai, U A E.

From April 2001 to February 2007

Under the direct Supervision of Drafting / Engineering / Production & Construction Engineer carried out the following Design / Detailing / Construction Engineering Drawings.

On the 6 year span I worked for 37 Decks, 39 Jackets, 2 Spar hulls, 2 Bridges and 2 Flares with Jay Ray McDermott

 Major Projects and Nature of works Completed & Involved

• Amenam / Kpono project – (Amp1 platform 12000 MT Offshore processing Deck & Jacket For ELF Petroleum Nigeria.)

• Shell Qatar ( 4 Decks & 4 Jackets)

• Medusa & Front runner Spar Hull (586 FT long and 94 FT dia spar hulls for Murphy U.S.A.)

• Qatar gas phase II Well head Jackets (WH-4, WH-5 & WH-6)

• Ras Laffan Lng Co. Ltd. [ Ras Gas ] Qatar (WH-7, WH-5, WH-4, WH-6 & WH-9 Jackets & Platforms)

• ONGC – N-11 & N-12 Decks for E.I.L. India.

• K J O (Al-Kafji joint operations Saudi Arabia) Project ( 2 Decks & 2 Jackets)

• Dolphin Upstream Offshore Facilities ( Dol-1, Dol-2 decks, Jackets, bridges & Flares)

• Saudi Armco ( MRJN, SFNY, HMUR 21 Nos. Jackets & 21 Nos. Decks)


 Producing Primary & Secondary steel design drawings for Platform from scratch
 Grating layout and plating layout on deck, stair, Access platforms, top of jacket walkway etc.
 Preparing handrail layout for deck, boat landing, stair, access platforms & jacket walkway
 equipment supports details
 Preparing cut list, shop drawings and template for Beams, Plates and Shapes.
 Structural steel detailing and developing client drawings for site fabrication as per site Query sheets ( S Q S)
 Preparing construction drawings for lifting, flipping & stacking
 Preparing ship / barge mooring details.
 Preparing crane lifting arrangement and details.
 Layout & Load out, Transportation arrangements
 Preparation of As-Built drawings after completion of the project

• Azerbaijan International Operating Company (AIOC) Caspian Operating at Baku ( Central Azeri-CA, West Azeri-WA, East Azeri-EA Deck Fabrication)

 Producing Primary & Secondary steel shop drawings for spar
 Preparing cut list, shop drawings and template for Beams, Plates and Shapes.



Structural Draftsman -
Mahimthura Consultants, Mumbai, INDIA.

From April 1999 to March 2001

 Structural Drawings

• Preparing Detailing of Beams, Columns, Footings & foundations (R.C.C)
• Preparing Layout of Residential, Commercial & Industrial Buildings
• Preparing Details for Water Tanks (Under ground & Over head)

 Projects Involved

• The New Equestrian Club Al-Janadriah Race Course (C.F.P) (Detailed R.C.C shop drawings (Beams, Columns & Slabs) For Saudioger Ltd. Saudi Arabia
• L & T Mumbai ( Civil drawings)
• C.I.D.C.O. Mumbai INDIA ( Architectural & Structural Drawings)

• Boss Engineers & Surveyors at HOWELL U.S.A. (Town Planning & Detailing of Sewers, Roads, Contour Maps & GIS Drawings)
• Hafeez Contractors Mumbai INDIA ( Civil, Architectural & Structural Drawings for Multi storied Buildings)
• K- Towers Mumbai, INDIA ( Ground + 30 Storied – Architectural & Structural Drawings)



Structural Draftsman -
Fed-Soft Consultants, Mumbai, INDIA.

From Oct. 1997 to March 1999

 Structural Drawings

• Preparing Detailing of Beams, Columns & Framings
• Preparing Raster to Vector Conversion of DWG’s / Maps / Contours in to Micro-Station or Auto-Cad formats.

 Projects Involved

• INDIAN NAVY , Navel Dockyard , Mumbai, India ( Preparing Detailed Structural drawings)
• Colour-Chem Mumbai, INDIA (Industrial, On-shore Platforms, Equipment support Detailing etc…..)

Academic Qualification

• Secondary School Leaving Certificate ( S.S.L.C.) from board of Public Examinations, Kerala State, INDIA.
• Completed P.D.C. (Pree-Degree Course / HSC) From Mahatma Gandhi University, Kerala, INDIA.

Technical Qualification

• Civil Draught’s man (2 Year Diploma) From International I.T.C. Kerala, INDIA. Passed with Grade-A
[Affiliated to N.C.V.T. Govt. of INDIA]
• Certified Course for Auto-Cad From Master Computers, Kerala, INDIA
• Certified Course for Micro-Station (2D & Foundation of 3D) From Fed-Soft Consultants Mumbai, INDIA
• In-house Training for X-steel
• In-house Training for PDMS (Plant design management System) from AVIVA

Knowledge of Computer Literacy

 Operating Systems

• M.S. Dos, Windows-3.1, 95, 98, 2000, NT & XP

 Cad Packages

• Auto-Cad All Versions

 Design & GIS Packages

• PDMS
• Auto-Cad L.D.D. (Land Development desk Top for town planning)
• Micro-Station-95, SE, J, Micro-Station Power Draft

 Others

• M.S. Office ( All Version)
• IRAS-B ( Supporting Package for micro-Station)

On Job Training and Courses

Quality awareness training Level-2 Procedure,
Creative thinking and problem solving,
Assertiveness skills,
Workplace safety
HSE Management System orientation Program
X-Steel
PDMS