CV Piping Engineer (Stress), Caesar, Smart Plant Review, ASME B 31.3, ASME B 31.4

Resume built for oil and gas job opportunities by a jobseeker with experience in Piping Engineer (Stress), Caesar, Smart Plant Review, ASME B 31.3, ASME B 31.4 - would you like to offer this candidate a job/contract employment?

CV/Resume ID no.: 77888
Last Updated: Thursday, January 10, 2008

Dear sir ,

I m applying for the post of Piping Design Engineer ( Stress Analysis Engineer)basically I am Mechanical Graduate Engineer and completed Post Graduate Diploma in Piping Design and also completed Post Graduate Diploma in Business Management .My qualification and technical experience is mentioned in my resume so please find attachment .

Looking forward for your reply

SUMMARY OF EXPERIENCE :
Currently working for Saudi Arabian Oil Company (SAUDI ARAMCO) projects, association with AMCDE and KBR (KELLOGG BROWN & ROOT) consort in Saudi Arabia, as an Sr. Piping Engineer, Since May 2007

PROJECT : GAS AND OIL SEPARATION PLANT ( GOSP )
CLIENT : SAUDI ARAMCO
LOCATION : UTHAMANIYAH, K.S.A.
RESPONSIBILITIES :
Working on CAESAR II (5.0) with following job responsibilities
• Stress analysis for the plant piping as well as transportation pipelines.
• Stress analysis for Onshore Piping - Oil Trunk line for Manifa Oil Well Site with
ASME B31.4 & ASME B 31.8
• Stress analysis for GOSP flow lines and water injection pipelines
• Stress analysis for the interconnecting piping to equipment such as HPPT, MPPT,
LPPT, Dehydrator and Pumps.
• Prepare and check of engineering procedures, specifications and standards.
• Prepare and check the basis of design, specification, data sheets, Piping Plan,
Isometrics, MTO, technical bid evolutions, Plant layout and other Drawings.
• Comment on Equipment Layout & Piping Studies
• Assist the designer in stress related work such as –
Rooting & supporting of the relief & blow down lines
• Assist the pipe support loop
• Pipe support position for the critical lines to be approved
• Preparation of Piping stress analysis and report by using isometrics, P&ID’s & Line list.

PROJECT : AS BUILD ON BUTANE,ETHANE AND METHANE PIPING ROUTING &
EQUIPMENT
CLIENT : JUYAMA GAS PLANT SAUDI ARAMCO
LOCATION : JUYAMA, K.S.A.
RESPONSIBILITIES :
• Field verification on Piping and Equipment based on P&ID and Piping Drawings.
• Red marking on the drawing as per the field modification
• Preparing drawing for client approval
• Preparing comment response to client

PROJECT : I.CONCEPTUAL DESIGN FOR PS-3Q ESCAPE CAPSULE A-4330C
II.DETAIL DESIGN FOR INSTRUMENTATION AIR RECIEVER @WHJ
CLIENT : QATAR PETROLEUM
LOCATION : DOHA ,QATAR
RESPONSIBILITIES :
• Field verification on offshore platform piping
• Modification and new routing on piping as per site condition
• Piping support selection

worked with SHAW STONE & WEBSTER ROLTA LTD as an Senior Stress Engineer
February 2006 to April 2007

PROJECT : SHARQ 3rd EXPANSION PROJECT - AL JUBAIL ETHYLENE PLANT
CLIENT : EASTERN PETROCHEMICAL COMPANY (SHARQ)
LOCATION : JUBAIL INDUSTRIAL CITY SAUDI ARABIA
RESPONSIBILITIES :
Worked on CAESAR II (4.5) with following job responsibilities.
• Performing stress analysis of various systems such as line connected to rotating
equipments like Pump and air coolers, air Fin Cooler & storage Tank.
• Analysis of Static Equipment like – Drums, Dryers, Exchanger, & Reactor.
• Obtain the approval for out of specification nozzle throats from Equipment package
Engineer
• Comment on Equipment Vendor
• Comment on Equipment Layout & Piping Studies
• Assist the designer in stress related work such as –
Rooting to / from sensitive equipment, critical vessels & heat exchanger
Decides the fix & sliding end of equipment
Rooting & supporting of the relief & go down lines
• Assist the pipe support loop
• Pipe support position for the critical lines to be approved
• Static equivalent seismic & wind analysis
• Safety relief valve calculation.
• Checking Loads & Stresses on Equipment Nozzles.
• Preparation of Piping stress analysis packages by using P&ID’s & Line list.
• Stress analysis of Column, heat exchanger & Pressure Vessels by using Vendor
Allowable nozzle loads.

Worked with SNC LAVALIN INDIA LTD. As an ‘Piping Stress Analyst’
Since July - 2004 to Jan -2006

PROJECT : POLY PROPILINE PLANT -I
CLIENT : M/S SUMITOMO CHEMICAL ENGINEERING CO LTD. JAPAN
LOCATION : JAPAN
RESPONSIBILITIES :
Worked on CAESAR II (4.5) with following job responsibilities
• Performing stress analysis of various systems such as line connected to rotating equipments like Pump and air coolers, & storage Tank.
• Analysis of Static Equipment like – Drums, Dryers, Exchanger, & Reactor.
• Static equivalent seismic & wind analysis
• Safety relief valve calculation.
• Load Case Preparation
• Checking Loads & Stresses on Equipment Nozzles.
• Preparation of Piping stress analysis packages by using P&ID’s & Line list.
• Support selection
• Loop size calculation
• Produce the stress isometric
• Complete the stress isometric after final calculation.
• Prepared the stress analysis report

Worked with Flexitech Stress Consultants, Mumbai. As an STRESS ENGINEER (Six Month)
Job Profile :
• Line modeling in CAESAR II
• Equipment modeling in CAESAR II
• Load Case Preparation
• Checking Loads & Stresses on Equipment Nozzles.
• Preparation of Piping stress analysis packages by using P&ID’s & Line list.
• Support selection
• Produce the stress isometric
• Complete the stress isometric after final calculation.
• Prepared the stress analysis report.

PGDPD :
Post Graduate Diploma in PIPING DESIGN from Vishwakarma Institute Of Technology, PUNE . INDIA ( MS ). in June 06.With following subject’s ,
1. Line sizing & optimization 2. Material of piping system
3. Layout Engineering 4. System Engineering
5. Corrosion & Material selection 6. Thermal Insulation
7. Field Instrumentation 8. Costing
9. Fabrication & Installation 10. Piping Design Codes
11. Statutory Regulation & Safety 12. Pipe support & Stress Analysis
PGDBM :
Post Graduate Diploma in Business Management from , Dr. B. A.M. University AURANGABAD, INDIA in 2005 ( 74.57 % )
B.E. (Production.): First Class (64.33%) From Dr.B.A.M. University Aurangabad, INDIA in 2004.

COMPUTER SKILS & EXPOSURE :
M.S.OFFICE, AutoCAD, CAESAR-II & Smart Plant Review
Exposure and familiarity with International Piping Standard such as , ASME B 31.3 , ASME B 31.4
And ASME B 31.8

piping design engineer,Exposure and familiarity with International Piping Standard such as , ASME B 31.3 , ASME B 31.4
And ASME B 31.8