CV Mechanical Engineer

Resume built for oil and gas job opportunities by a jobseeker with experience in Mechanical Engineer - would you like to offer this candidate a job/contract employment?

CV/Resume ID no.: 78298
Last Updated: Sunday, June 6, 2010

I'm a lazy person. Next time I get burned!

WORKING EXPERIENCE:
• 02 July 2000 to 16th November 2005 Worked as a Inspection Technician Mechanical in FFBL Fauji Fertilizer Bin Qasim Ltd. (Formerly FJFC) Karachi Pakistan.
• 17th of November 2005 to 16th of November 2006 Worked SBG (PCM) Saudi Binladin Group as a QA/QC Inspector Mechanical in Saudi Arabia.
• Join Construction Company in Pakistan first of February 2007 as a QA/QC Engineer Mechanical and Present.
• Attend (SAMREF) Saudi Aramco Mobil Refinery Company Ltd. T/A 2006 in Saudi Arabia.
• Attend Yanbu National Petrochemical Co. (YANSAB) Construction activates in Saudi Arabia.

I AM INVOLVED IN FOLLOWING ACTIVITES:

STIONNARY EQUIPMENT INSPECTION:

• Detailed internal inspection of vessels, columns, drums, tanks, rectors, stack,
• Preparation of inspection reports based on detailed internal inspection of the equipment maintaining of inspection history (Documentations) & recommendations repair procedure as per code and standard for safe reliable service of plant.
• Hydrostatic & Pneumatic leak testing of vessels. PAGE NO 01-03
• NDT methods inside vessels such as DPT, MPT,UT Thickness measurement as a part of condition monitoring (During every Turnaround and as per Plant requirement)
• Thickness monitoring of in service vessels, columns, drums, tanks, & heat exchangers of continuous condition monitoring.
• Collection of data to prepare inspection job packages to be implemented during the turnaround to focus the problem areas when the equipment is opened.
• Study / discussion / history preparation after any incident occurs so as to stop it from reoccurring.
• Final inspection before box-up to ensure leakage free plant startup.

VIBRATION MOINTERING:

• Vibration monitoring of different equipment e.g. Pumps, Steam Turbine & Gas Turbine, Blowers, & Compressors (Co2, NH3, Synthesis Gas, Air Compressor)
• Using instrument (Intake IRD Data Pac -1500 & Bently Nevada & ADRE) Routine & planned casing vibration monitoring of rotary equipment using (TK 81 & Data Pac)
• To make reports & informed concern department for maintenance.

Codes & Standards:

General we follow the following standards & codes as a reference.
• ASME Standards,
• API Standards,
• ASTM Standards,
• ANSI Standards,
• TEMA Standards,

HEAT EXCHANGER / BOILERS / FURNACES:

• Visual inspection of heat exchanger, air cooler, boiler, furnaces etc.
• Preparation of inspection reports, maintaining of inspection history & recommending repair options for the equipment.
• Routine inspection of furnace catalyst tubes to see any abnormality like glowing tube or overheated red-hot tube & their temperature measurements.
• Witnessing hydrostatic & leak testing / SFT of heat exchanger, air cooler, boilers.
• NDT techniques inside the furnace, boiler & heat exchanger like thickness measurement of furnace, boiler & heat exchanger tubes & their parts.

PIPING INSPECTION:

• To plan the day to day activities for welding and inspection in the site.
• To witness the bevel P.T and ID of the existing pipe and check the fit up of
The tie- in joints.
• Inspection of joints visually, before, during & after welding
• To select the NDT (RT,UT,MT,PT) methods for joints as per the ITP& service
• To witness the Non Destructive Testing like PT &MPI, Interpretation of RT films
PMI reports & PWHT charts,
• Preparations of punch list and hydrotest packages.
• Thickness monitoring of in service critical plant piping to ensure reliable / incident free plant operation.
• UT Thickness monitoring based replacement recommendations to avoid any failure.
• External visual inspection of pipeline to see any rust / corrosion & also the condition of pipe supports especially of steam network. PAGE NO 02-03

WELDING:

• Visual welding inspection such as VT / DPT / MPT / & RT.

MOSTLY USED NDT TECHNIQUES:

• Ultrasonic thickness measurement (Panametrics 36 DL Plus + Software V 2.00 & DM-4 DL, DM-3 & DM-2) use for piping vessels, columns, drums, tanks, rectors, stack, & exchangers.
• DPT of welding inside columns & vessels. (Normal & High Temperature)
• Radiographic testing (Ir 192).
• MPT (Fluorescent & Contrast Paint Both)
• Hydrostatic & Pneumatic leak testing.
• Material Analysis (Alloy Analyzer X-Met 880)
• Coating thickness measurement using Delta Scope MP-2c.
• Holiday testing of under ground piping after coating / wrapping.
• Hardness measurements.

TURNAROUND EXPERIENCE:

• FFC-FAUJI FERTILIZER COMPANY LTD GOTH MACHI. (FFC-1) PAKISTAN
• FFC-FAUJI FERTILIZER COMPANY LTD MIRPUR MATHELO (FFC-3). PAKISTAN.
• SAUDI ARAMCO MOBIL REFINERY COMPANY LTD. (SAMREF) SAUDI ARABIA YANBU AL-SINAIYAH.

I was officially assigned to attend annual turnaround of FFC-1 & FFC-3 & (SAMREF) this added worth to my experience. My responsibilities included:

• Pre-cleaning inspection of vessels, columns, drums, tanks, & heat exchangers.
• Generate pre-cleaning inspection reports.
• Post cleaning inspection.
• Generate detail report given recommendations for corrective action.
• Final inspection before Box-up to ensure plant start-up with zero leakage.


PLANT COMMISSIONING EXPEREINCE:

FFBL is a pr-owned ammonia plant. During its construction phase I was involved in details internal inspection of all the vessels, columns, drums, tanks, & heat exchangers & piping welding & different other NDT techniques inspect vessels, columns, drums, tanks, & heat exchangers generate & given recommendation to rectify problems.

CONSTRUCTION FILED EXPERIENCE:

• Generate daily welding records.
• To arrange NDT as per client & codes requirements.
• Visual pipe welding inspection on daily basis.
• Attend daily morning meeting with client and follow-up hot issues NCR & (surveillance) and other related of QA/QC.
• To prepare punch list after complete the project.
• To prepare the dossier for submission of client after completion of project.

EDUCATION &TECHNICAL QUALIFICATION:
• Matriculation With Science
• Intermediate With Science.
• Diploma of Mechanical Engineering in Technology.
• One-Year Course of Mechanical Drafting.
• Training ISO 9001: 2000 (Internal Quality Auditing) Conduct by National Inspection
and Technical Testing Co. Ltd. Saudi Arabia.

APPRENTICESHIP TRAINING:
• Two Years of Apprenticeship (01Junary 1998 to December 2000). In Mechanical Inspection from FFBL Fauji Fertilizer Bin Qasim Ltd. (Formerly FJFC) Karachi Pakistan.

-

-