CV PDMS, NavisWorks & Tribon M3 - Marine, Oil and Gas Electrical Designer

Resume built for oil and gas job opportunities by a jobseeker with experience in PDMS, NavisWorks & Tribon M3 - Marine, Oil and Gas Electrical Designer - would you like to offer this candidate a job/contract employment?

CV/Resume ID no.: 78318
Last Updated: Friday, February 6, 2009

Objectives

To secure a challenging position in the field of Design Engineering, where my vast experience & creativity will be used for completing the job efficiently & in time.

Summary of Qualifications

Offering more than Fourteen years of Experience in Marine, Offshore, Oil & Gas Industry with a wide variety of projects involved in Electrical & Instrumentation Disciplines. Acquire extensive knowledge in a broad range of Computer programs & other Various E & I Engineering Field. Confident to fill a Lead Position or Perform as an integral part of the team.

Name of company : Woodside Energy Ld
Period : Jun’ 2008 – Till Date
Position : PDMS & CAD Electrical Designer
Project : LNG PLATFORM, WoodSide Energy Ltd, Australia
Job Type : Contract

Live Design using PDMS- MDS (Multi Disciplinary Support) Modeling Tray, Pipe Support & Cable Tray. Extraction of 2D from the Model and generate support details.

Extraction of 2D General Arrangement drawings from PDMS Draft & convert into AutoCAD Drawings to generate Plan Views, Sectional Elevations and details of data tables and detailed MTO’s.

Provide detailed engineering input during all design phases, including interpretation and challenge of standards.

Actively communicate with other disciplines to optimize areas of interface, during the design development, review and check processes.

Ensure equipment vendors provide timely and quality input into design packages.

Review all third party discipline design works.

Ensure design packages to meet the relevant safety,environmental and ergonomic standards.

Name of company : Noble Drilling Services Inc Houston USA. Singapore.
Period : Sep’ 2007 – May' 2008
Position : Electrical Designer (PDMS & CAD)
Project : Noble Danny Adkins, Noble Jim Day drilling Rig

Duties and Responsibilities :

Involving in the designing the drilling rig, mainly in the Electrical & Instrumentation (Medium Voltage, Low Voltage & DC systems) cable trays routing & power plan drawing preparation & cable penetration detailed design works in Auto-CAD & PDMS.
Provide detailed engineering input during all design phases, including interpretation and challenge of standards.
Working very closely with the Design Manager/ other discipline Engineer in laying out the appropriate drawings as to insure optimum performance in the fabrication on the systems.

Actively communicate with other disciplines to optimize areas of interface, during the design development, review and check processes.
Ensure design packages to meet the relevant safety, environmental and ergonomic standards.
PDMS & AutoCAD used for installation drawings, reference and modification.

Name of company : Neptune Marine & Drilling (S) Pte Ltd., Singapore.
Position : Electrical Designer (CAD & PDMS)
Period : Sep’ 2005 - Sep’ 2007


v Type: Neptune Explorer Drilling Vessel
v Type: Neptune Discover Drilling Vessel
v Class : ABS

Duties and Responsibilities :

Involving in the designing the drilling vessel, mainly in the Electrical & Instrumentation (Medium Voltage, Low Voltage & DC systems) cable trays routing & power plan drawing preparation & cable penetration detailed design works in Auto-CAD.
Provide detailed engineering input during all design phases, including interpretation and challenge of standards.
Working very closely with the Design Manager/ other discipline Engineer in laying out the appropriate drawings as to insure optimum performance in the fabrication on the systems.

Actively communicate with other disciplines to optimize areas of interface, during the design development, review and check processes.
Ensure design packages to meet the relevant safety, environmental and ergonomic standards.
AutoCAD used for installation drawings, reference and modification.

Name of company : Sembawang Shipyard Pte Ltd., Singapore.
Position : Asst Engineer (CAD)
Period : May’ 2003 - Sep’ 2005

Duties and Responsibilities :

Prepared power, control and instrumentation System diagrams. ( Offshore Marine)
Involved in the sourcing power equipments information.
Coordinates with engineers and draughts persons in the design functions & done on-board ship check & verification.
Performs engineering calculations for power and instrumentation systems
Guides draughts persons and contract staff’s in producing detailed construction drawings.
Involved in the preparation of detailed instillation Drawings.
Reviewed supplier / sub-contractors design deliverables.

v Vessel Name : BERGE SISAR FPSO
v Project : FPSO
v Class : ABS

Involved in the Design of Power system with redundancy as per Class requirements
Involved in the design of Ventilation, Lighting & Livestock equipments as per Class requirements.
Preparation of block diagram, termination diagram and layout drawings as per modifications defined as of the following systems in accommodation areas -
Fire detection and general alarm system
Produce water system
Emergency power system
Radio, Navigation & Telecommunication system
Prepare Electrical equipments MTO and cable MTO.
Liaise with Ship repair Managers, Production Managers, Site Engineers & Owner representatives on project and production matters
Preparation of detailed Engineering drawings as per approved design.

v Vessel Name : Munin FPSO
v Project : FPSO
v Class : LRS

Involved in the Design of Power system with redundancy as per Class requirements
Involved in the design of Ventilation, Lighting & Livestock equipments as per Class requirements.
Preparation of block diagram, termination diagram and layout drawings as per modifications defined as of the following systems in accommodation areas -
Fire detection and general alarm system
Produce water system
Emergency power system
Radio, Navigation & Telecommunication system
Prepare Electrical equipments MTO and cable MTO.
Liaise with Ship repair Managers, Production Managers, Site Engineers & Owner representatives on project and production matters
Preparation of detailed Engineering drawings as per approved design.
Involved in As-built dwgs of power generation & distribution system dwgs.
Involved in the detailed dwgs of Fire & Gas system and ESD system.
Involved in the updating of modified and new systems operation manuals and owner documents of the various systems.

v Vessel Name : ERHA FPSO
v Project : FPSO
v Class : LRS

Involved in the Design of Power system with redundancy as per Class requirements
Involved in the design of Ventilation, Lighting & Livestock equipments as per Class requirements.
Preparation of block diagram, termination diagram and layout drawings as per modifications defined as of the following systems in accommodation areas -
Fire detection and general alarm system
Produce water system
Emergency power system
Radio, Navigation & Telecommunication system
Liaise with Ship repair Managers, Production Managers, Site Engineers & Owner representatives on project and production matters
Preparation of detailed Engineering drawings as per approved design.
Involved in As-built dwgs of power generation & distribution system dwgs.
Involved in the detailed dwgs of Fire & Gas system and ESD system.
Involved in the updating of modified and new systems operation manuals and owner documents of the various systems.

v Vessel Name : Sapura 3000
v Project : DP II Derrick Pipe Lay Vessel
v Class : ABS

v Responsibilities :

Involved in the detail design of Main Power system and distribution works.
Involved in the design of main cable ladder routing on freeboard deck, tank top, engine room and accommodation arrangements.
Involved in the preparation of block diagrams, termination diagrams and layout drawings for the following system -
Fire detection system and general alarm system
Public Address system
Telecommunication c/w radio & navigation.
Produced water system
Sea water and Fresh water system
Instrumentation Control and Monitoring system.
Liaise with Owner’s and their consultants and specialized vendors on the project design process.
Liaise with Ship repair Managers, Production Managers, Site Engineers on project status.
Co-ordinate with piping/ mechanical / hull & outfit discipline for the system design drawings and also check & update drawings.

v Vessel Name : British Oak
v Project : Oil Tanker
v Class : ABS

Involved in the design of Power generation and distribution system with redundany requirements for the livestock as per Australian Maritime Safety Authority regulations.
Involved in the detailed dwgs for the arrangements, mainly in Cargo hold lighting & fans.

v Vessel Name : LNG Galea
v Project : GAS Carrier
v Class : LRS

Involved in the Preparation of the design drawings and documents during FEED phase & tendering stage. The main systems as follows-
Design Main & Emergency power generation & distribution system
Design Main cable routing dwgs
Design the modification of existing Radio systems to comply with regulatory rules
Design the expansion of fire & gas systems
Design PAGA & Telecomm systems
Involved in the interfacing details between Marine and Process, Turret equipments.
Instrumentation Control and Safety Systems dwgs.
Verify the vendor & specialist’s document and drawing deliverables.
Prepare Electrical equipments MTO and cable MTO.
Liaise with Owner’s with their consultants and specialized vendors on the project design process.

Name of company : Wah Yuen Electrical Engg Pte Ltd, Singapore.
Period : Dec’ 1994 - Mar’ 2003
Position : Asst Elect Design Engineer (CAD)

Vessel Name: M/V Endeavor

I was involved in
Responsible for all design aspects of electrical & Instrumentation installation details
Evaluated system drawings and design model as well as our equipment layout drawings to provide installation teams with accurate equipment and cabling layout drawings for all applicable compartments.
Discussed/resolved any on site issues with shipyard and relayed results to installation team.
Designed to meet customer’s specifications and fall within relevant governing codes.
AutoCAD Design used for installation drawings, model reference and modification.

Vessel Name :Edco Star
I was involved in
Responsible for all design aspects of electrical & instrumentation installation
Evaluated system drawings and design model as well as our equipment layout drawings to provide installation teams with accurate equipment and cabling layout drawings for all applicable compartments.
Discussed/resolved any on site issues with shipyard and relayed results to installation team.
Designed to meet customer’s specifications and fall within relevant governing codes.
AutoCAD used for installation drawings, reference and modification.
Vessel Name: British Pioneer (Oil Tankers)
I was involved in
Responsible for all design aspects of electrical & instrumentation installation details.
Evaluated system drawings and design model as well as our equipment layout drawings to provide installation teams with accurate equipment and cabling layout drawings for all applicable compartments.
Discussed/resolved any on site issues with shipyard and relayed results to installation team.
Designed to meet customer’s specifications and fall within relevant governing codes.
AutoCAD used for installation drawings, reference and modification.

Vessels Name: LNG Galeomma, Shell International (GAS)
LNG Gallina Shell International (GAS)
LNG Gemmata Shell International (GAS)

I was involved in
Responsible for all design aspects of electrical & instrumentation installation
Evaluated system drawings and design model as well as our equipment layout drawings to provide installation teams with accurate equipment and cabling layout drawings for all applicable compartments.
Discussed/resolved any on site issues with shipyard and relayed results to installation team.
Designed to meet customer’s specifications and fall within relevant governing codes.
AutoCAD used for installation drawings, reference and modification.

Vessel Name : A Elephant (Bulk)

I was involved in
Responsible for all design aspects of electrical & instrumentation installation
Evaluated system drawings and design model as well as our equipment layout drawings to provide installation teams with accurate equipment and cabling layout drawings for all applicable compartments.
Discussed/resolved any on site issues with shipyard and relayed results to installation team.
Designed to meet customer’s specifications and fall within relevant governing codes.
AutoCAD used for installation drawings, reference and modification.

Vessel Name : British Trader (Oil Tankers)

I was involved in
Responsible for all design aspects of electrical & instrumentation installation
Evaluated system drawings and design model as well as our equipment layout drawings to provide installation teams with accurate equipment and cabling layout drawings for all applicable compartments.
Discussed/resolved any on site issues with shipyard and relayed results to installation team.
Designed to meet customer’s specifications and fall within relevant governing codes.
AutoCAD used for installation drawings, reference and modification.

Vessel Name : Energy Ranger (Bulk)

I was involved in
Responsible for all design aspects of electrical & instrumentation installation details.
Evaluated system drawings and design model as well as our equipment layout drawings to provide installation teams with accurate equipment and cabling layout drawings for all applicable compartments.
Discussed/resolved any on site issues with shipyard and relayed results to installation team.
Designed to meet customer’s specifications and fall within relevant governing codes.
AutoCAD used for installation drawings, reference and modification.

Vessel Name : Grand Clipper(Bulk)

I was involved in
Responsible for all design aspects of electrical & Instrumentation installation
Evaluated system drawings and design model as well as our equipment layout drawings to provide installation teams with accurate equipment and cabling layout drawings for all applicable compartments.
Discussed/resolved any on site issues with shipyard and relayed results to installation team.
Designed to meet customer’s specifications and fall within relevant governing codes.
AutoCAD used for installation drawings, reference and modification.

Vessel Name : S.A.Fortius

I was involved in
Electrical load balance analysis to aid in sizing of electrical power source
The design of cable ladder & equipment installation drawings including Main Single Line and other drawings.
Research into future electrical engineering concepts for power consumption
Co-ordinate and design the drawings for class & owners approval
AutoCAD used for installation drawings, reference and modification.

Vessel Name : Dalasini Doxa

I was involved in
Responsible for all design aspects of electrical installation details
Evaluated system drawings and design model as well as our equipment layout drawings to provide installation teams with accurate equipment and cabling layout drawings for all applicable compartments.
Discussed/resolved any on site issues with shipyard and relayed results to installation team.
Designed to meet customer’s specifications and fall within relevant governing codes.
AutoCAD used for installation drawings, reference and modification.

Educational Qualifications:
Diploma in Auto-CAD (2D)
Certified in Visio (2D)
Bachelor Degree in Science
Electrical PDMS (3D model)

Operating System : MS Windows 2000-XP
Presentation Package : MS-Office 2007
2D Design & Drafting : AutoCAD 2000 - 2008 & Microsoft Visio 2007
3D Design & Modeling : PDMS 11.6 SP4, NavisWorks & Tribon M3
Programming Knowledge: Yes

NIL