CV Lead Electrical Engineer

Resume built for oil and gas job opportunities by a jobseeker with experience in Lead Electrical Engineer - would you like to offer this candidate a job/contract employment?

CV/Resume ID no.: 79166
Last Updated: Thursday, March 20, 2008

Dear sir,

I am a graduate engineer having 23 years of experience in the field of Construction, Testing, Commissioning, maintenance and operation of Transmission & Distribution Systems with an deep and sound knowledge in Construction, Protection and Relaying in Modern Power System Engineering and with through knowledge of standards, codes of electrical equipments including 4 years of over seas experience in Middle East.
Looking forward for rewarding career with leave rotation.
My availability is immediate.

Latest since Aug 2007
Senior Project Engineer- Occidental,MUKAIZANA,OMAN Through UEP Co :
Construction Lead for Electrical & Instrumentation.(12 supervisors/43 crew leads/200 technicians).
Preparation of construction check sheet, data sheet & pre commissioning sheet(QA/QC checks).
Witnessing pre commissioning tests of transformers, Change over panels, LV panels, control panels, switchgears, (6.6kv,11kv&33kv) and pumps.
Solving all technical queries on construction constrains to the Consultant and co-coordinating with consultant to resolve design & drawing slips.
Evolving planning schedule of works ahead in new oil well heads, new steam generating plants , De-bottle-Necking plant of Central Production facilities with shipping &water disposal pumps , Sewage treatment plant in camp areas and Distribution power sub-station.
Laying of 132KV UG cables from PDO switch yard to new CPF station with associated cable sealing
ends, surge arrestors and isolators.
Assisting consultant in preparation of specification for future electrical works.
Extension of power supply with associated controls to the new shipping pump in Sadad,PDO station.
Installation of PLC,ESD,IFB & SCADA panels.
Installation and extension of power supply to HVAC SYSTEM.

A)Dec 2006 to Aug 2007.
Assistant Executive Engineer/MRT/Protection-TNEB.
In charge for Testing and commissioning of substation equipments up to 110 KV level. Erection, Testing and Commissioning of 110 KV outdoor and 33 KV Indoor breakers ( VCB & SF 6 ) of manufactured by AREVA, ABB, SIEMENS, CROMPTON, VOLTAS, REYROLLE, JOTHI, ALIND. Good exposure and trouble shooting in 11 KV Indoor VCB of GEC, S & S, REYYROLLE, ECE, MEGAWIN and OLG and 110 KV Circuit breakers of ABB, Crompton Greaves, BHEL and Areva.

Testing & commissioning of Differential Relays, Over current / Earth Leakage Relays and Auxiliary relays.
Member of technical committee evolving specification for supply of power transformers & switch gears.

Testing and calibration of static energy meters installed for high voltage consumers. The metering system includes instrument transformers from 11KV to 110 KV.
Maintenance of substations up to 230 KV which includes indoor, outdoor &GIS (Merlin Gerin & Pingdingshan, china). Inspection of equipments at vendors works. Erection of switchgears(SF6,VCB,GIS) and power transformers.

Testing and Commissioning of protection schematics of power transformers and its Breakers with associated relays and auxiliary relays.
Imparting training to sub station operators on operation and maintenance of sub station equipments.

B) June 2006 to Nov 2006:
Senior Electrical Engineer/Al Mostajed Technologies co LLC
Testing and commissioning of substation equipments for FEWA. Project head for design, erection and commissioning of capacitor banks in 6 substations (132/11 KV) at Dubai for DEWA.

C) Jan 2002 to June 2006:
Assistant Executive Engineer/MRT/Protection,TNEB.
Testing and Commissioning of Power Transformers (8 to 50 MVA Capacities,11kv to 110kv) totalling up to 1600 MVA. Testing and Commissioning of 110 KV, 33KV, 11KV breakers. Testing and Commissioning of 110KV, 33KV, 11KV, current Transformers and Potential Transformers. Testing and Commissioning of Batteries & Chargers (30 Volts & 110 Volts). Testing and Commissioning and maintenance of protection schematics of power transformers, Breakers with associated relays and auxiliary relays. Complete Testing and Commissioning of 4 nos. 33/11 KV indoor substation, 1 no. 110 /11kv outdoor substation, 3 nos. 110/33/11KV indoor substations, and 2 nos. 33/11KV Outdoor substations.

D) Jan 1997 to Jan 2002:
Assistant Engineer, Special Maintenance,TNEB.
Erection, Testing and Fault rectification of control gears from 11KV to 110KV at both indoor/outdoor substations. Repairing of sick distribution transformers of various capacities ranging from 63 KVA to 500 KVA (11KV/433V) which includes right from building of cores, HV/LV Coil winding and testing.)
Conducted strip test on distribution transformers. Repairing of Metering sets of various ranges. (i.e. CT-100/50, 40/20/5A, PT-11000/110 V) Testing of transformer oil, insulators, hand gloves and other insulating materials procured by the TNEB. Conversant with reconditioning of released transformer oil from the transformers and breakers. Testing and commissioning of power transformers. (upto 16 MVA,33/11kv).

E) Dec 1995 to Dec 1996
Project Engineer, M/s. Al-Falahy Ruwi, Sultanate of Oman
Executed two projects for P.D.O/Oman, the works involved were erection of transformers, OH lines and LVDB for Well heads in a on shore oil field located in north of Oman.
The other work involved installation of 4 nos CAT DG sets with associated fuel tanks.
Executed a project of installing communication tower with associated ghaat road,OH lines and distribution transformer for Ministry Of Defence, Oman.
Executed one major project for OMAN AIR at RUWI International Airport . The works involved were erection of transformers, RMUs and laying of XLPE cable.

F) June 1994 to Dec 1995
Site Engineer,M/s.Al-Hussain Engineering services LLC,Ruwi,Sultanate of OMAN
Execution of LT and HT networks up to 33 KV as per Oman standards.(Networks consists of overhead lines and XLPE U.G Cables) Execution of industrial electrification works including erection of LT panels.APFC panels and Main Distribution Boards. Surveying, Designing and preparation of technical specification for MEW tenders. Tendering, procurements and co-coordinating with MEW for inspection, testing and commissioning.

G) May 1992 to May 1994
Assistant Engineer-North Madras Thermal Power project and Basin Bridge Gas Turbine Power Project – TNEB.
Review of Technical design, specifications proposed by Tata Consultancy Services, Madras and tendering for the following packages
Laying of HV/LV cables, cable trays and terminations, Electronic weigh Bridging system, CTs, VTs, 2 MVA Transformers, Switchyard erection package, 123 KV isolators and SF6 Circuit Breakers.

H) Oct 1987 to May 1992
Assistant Engineer, Office of The Chief Engineer/Distribution, TNEB,CHENNAI
Design and preparation of L.V networks for Agricultural, Industrial and Domestic consumers of capacity less than 140 HP. Design and preparation of improvement works involving l1KV/33KV/ L.V.O.H. Lines and cables along with Distribution transformers of capacity ranging from 100 KVA to 500 KVA. Execution of power distribution networks for catering supply to L.V Consumers. Execution of LV/HV structural works. Erection Testing and Commissioning of Supply distribution networks attending to break downs in substations as well as in 33 KV, 11KV and LV Over head lines/ Under ground Cables.

I)Spet 1984 to Oct 1987.
Site engineer at M/s Indian Engineering Construction, Chennai.
Design and preparation of Estimate and Electrification of Building and factories. Maintenance of power supply system at various consumers works in a private firm at Chennai.

EDUCATIONAL AND PROFESSIONAL STATUS
Bachelor of Engineering (Electrical & Electronics 5 Years Integrated Syllabus from University of Madras
Post Graduate Diploma in Materials Management - Annamalai University
Post Graduate Diploma in Power Plant Instrumentation &Controls - Annamalai University

Training Programmes Attended
1)”Hydrogen sulphide” familiarisation course conducted by Oxy, Mukhaizna, Oman.
2)” High Voltage Testing Techniques”- Conducted By College of Engineering - Anna University
3)”Power/Energy Calibration”- Conducted By STQC Government Of India .
4)”Protection Practices & Relaying Techniques”- Conducted By TNEB
5)”Industrial Relations”- Conducted By TNEB
6)”Management Techniques”- Conducted By TNEB
7)”Electricity Metering Technologies & Systems”- Conducted By – PFCL, Ministry of Power
8)”Power Quality, Harmonics & Pollution-Uses, Effects & Mitigation”- Conducted College of
Engineering – Anna University. .
9)”Power Distribution Management” - Conducted By Power System
Training Institute Bangalore.

ms word &excel

testing of protective relays,energy meters calibration