CV QA/QC Inspector Welding Mechanical & painting/coating

Resume built for oil and gas job opportunities by a jobseeker with experience in QA/QC Inspector Welding Mechanical & painting/coating - would you like to offer this candidate a job/contract employment?

CV/Resume ID no.: 80155
Last Updated: Sunday, May 18, 2008

A QA/QC Inspector (welding Mechanical & painting/coating) achieving the 8 year's highest level of knowledge and professionalism in the field of Quality assurance /Quality control, in Clint side as well as contractor side with background of Welding, Painting &NDT with international certification. Improved Experience in inspection in the field of Pipeline, Gas plant, LNG, Power plant, Petrochemical, Fertilizer, Pressure vessel and Desalination plant

26 March 2008 – 19 March 2008 – KKEM INSPECTION
- MTBE Gebeng

POSITION: STATIC INSPECTOR ( VESSEL & COLUMN )
Job responsibilities ( general ) :
- To ensure the integrities of equipment :
* No mechanical damage due to process to the equipment
* To check of corrosion occurred after several period of services
* To check welding condition external and internal
* Cleanliness after several period of service
- To liaise with NDT team for inspection required

June 2007- February 2008

QC Coordinator – Kencana Bestwide - Client - Carigali-Hess Project- In-charge of Onshore Piping & offshore HUCC activities.
R & R as described below :-
1. Monitors the construction activities from a technical perspective against contracts
Specification.
2. Assists the QA/QC Manager in audits of fabricators compliance with procedures
and specifications
3. Performs the following QC functions.
4. Witness key hold points during construction
5. Review x-rays, piping test paks, installation of materials including pipe, supports,
and insulation
6. Verifies pipe cleanliness after flushing
7. Performs a PID check before and after hydrotest to ensure that no piping missing.
8. Witnesses bolt tensioning of the flanges and verify proper alignment thereof.




MAY 3, 2007 – 30, 2007 - NDE CONSULTANCY SDN BHD
- OPTIMAL TURNAROUND 2007

POSITION : PLANT INSPECTOR ( static equipment and defect team )
Job responsibilities ( general ) :
- To ensure the integrities of equipment :
* No mechanical damage due to process to the equipment
* To check of corrosion occurred after several period of services
* To check welding condition external and internal
* Cleanliness after several period of service
- To liaise with NDT team for inspection required
- To ensure all documents relates to inspection ready and completed
- To liaise with DOSH Officer for final inspection
- To witness welding repair ( if applicable )
- To witness Hydro or Pneumatics Testing ( if applicable )
- To check the cleanliness the equipment prior to box-up


January 2006-May 2007 – Mushtari Eng – Client Exxon Mobil,

QC Coordinator in-charge of Duplex Stainless Steel (ASTM A790 UNS 31803) fabrication

R & R as described below

 Verifying material certificates & conduct physical inspection upon receipt, liaise with the MATCO on discrepancies
 Conduct DSS WQT & witness WPQT
 Conduct physical inspection on DSS fabrication to ensure specification compliance
 Compile QAQC records & vet NDT reports, produce weekly & monthly weld repair rates & welding inspection summary.
 Educate other QC personnel on DSS fabrication
 Review fabrication drawings to include all as built dimension.
 Maintain calibration records of inspection equipment
 Conduct and verify oxygen content using analyzer & ferrite check using ferrite-scope.
 Monitor NDT & HT progress
 Liaison with Third Party & DOSH on certification & final inspection
 Ensure proper material preservation is maintained
 Produce release note prior to offshore delivery.

Projects

DSS Tabu A,B & Guntong E.
Dehydration Skid,
Fabrication of Monel Sheathed Riser Spool for TUA, TUB & GUE
Fabrication of Chemical Feed Tank, Chemical Injection Skid for TUA & TUB
Was also involved in the Shutdown for Palas, Semangkuk, Guntong A-E EPMI Platform

APRIL 22,2005 – MAY 25,2005
TESTEX INSPECTION ( M ) SDN BHD
PETRONAS PENAPISAN TERENGGANU ( PPTSB ) TURNAROUND 2005
POSITION :
WELDING INSPECTOR
Job responsibilities ( general ) :
- Witness and monitor tie – in and golden joint activities such as :
* Edge preparation
* Cleanliness internal before final closing
* Final fit – up inspection
* Heat treatment if required
* Using of consumable
* Using of WPS and range of WPQ
* Final visual inspection
* Painting inspection
* NDT required
* Pre – stressing / cool pull
* Collect all document, report and submit to owner

DECEMBER 2003-JANUARY 2006

QC Coordinator – KNM Process

Projects (fabrication)

 Heavy wall SS steel column & vessel for North West Shelf Australia-Foster Wheeler
 Tankage for GOVE G3, Third Stage Expansion Project Australia
 Reactors & Vessels fabrication for Fertilizer Complex Al Jubail, Saudi Arabia, Shedden Udhe Germany GMBH.
 Heat Transfer Equipment & Tank for Redline II Package IIB, Petronas, PASB.
 Air-Cooler for Glycol Dehydration System for EPMI Guntong E.
 Heat Transfer equipment for Lion South Africa, Flour Daniel BV
 Main Reactor & Diolefin Saturator, Sinclair Flour Canada
 Air Receiver for Mobil, Nigeria
 Column for Ultramar Clean Fuel, Flour Daniel
 Column for Valero Gasoline De-sulfurization, Jacobs Engineering
 Revamp & Rejuvenation for MLNG 1&2, Kellogs & B&R
 MLNG 3 Condensate Storage Tank & Slop Tank
 JGC Dong Quat Refinery T2103 Propane/Propylene Splitter
 Columns & Drums for Sumitomo Chemical/Aramco Overseas JV, Rabigh Development, Saudi Arabia.






R & R as described below

1. Verifying material certificates, MRIR & MMIL. Liaise with MATCO on discrepancies, NCR & MDR.
2. Review QAQC records & NDT reports, weekly & monthly weld repair rates & welding inspection summary.
3. Update QAQC Manager on field construction revisions & modifications
4. Review MDR and liaise with all parties concerned.
5. Review & monitor QC inspector & NDT Technicians performance to ensure compliance meeting the specification requirements.
6. Liaise with Sub-Contractors QAQC personnel, to ensure QA QC requirements are complied.
7. Verify proposed WPS
8. Witness the WQT & WPQT
9. Liaise with Third Party reps on certification & final inspection work activity
10. Conduct internal audit meeting ISO requirement.
11. Attended Management meeting & provides QAQC status & updates.
12. Conduct periodic check on QAQC filing systems to ensure that it continues to be updated. Liaise this activity with the Document Controller.



OCTOBER -NOVEMBER 2003

QC COORDINATOR

Tepat Teknip Kejuruteraan Sdn. Bhd


Projects

1. Shutdown for BASF (repair work on behalf of DOSH)
2. Shutdown for TCOT EPMI, Kerteh
3. Shutdown for Palas,Semangkuk, Guntong A-E Platform
4. Supply of vacuum PipestilL for T505 Replacement- Exxon
5. Petronas Ammonia-Pressure vessels for Package IIB
6. Lime Slurry Tanks – Huntsman Tioxide


R & R as described below

 Prepare QC procedures
 Working closely with DOSH reps
 Attend management meeting
 Liaise with Client’s reps
 Conduct site inspection and monitor QAQC work progress.




DECEMBER 2000-SEPTEMBER 2003

QC COORDINATOR

Kvaerner Process Asia Pacific

Projects

 Glycol Dehydration Systems for Duyong
 Valero Wilmington Refinery- Valero Alky Revamp & Expansion
 Inco, Australia.


R & R as described below

1 Verifying material certificates, MRIR & MMIL. Liaise with MATCO on discrepancies, NCR & MDR.
2 Review QAQC records & NDT reports, weekly & monthly weld repair rates & welding inspection summary.
3 Update QAQC Manager on field construction revisions & modifications
4 Review MDR and liaise with all parties concerned.
5 Review & monitor QC inspector & NDT Technicians performance to ensure compliance meeting the specification requirements.
6 Liaise with Sub-Contractors QAQC personnel, to ensure QA QC requirements are complied.
7 Verify proposed WPS
8 Witness the WQT & WPQT
9 Liaise with Third Party reps on certification & final inspection work activity
10 Conduct internal audit meeting ISO requirement.
11 Attended Management meeting & provides QAQC status & updates.
12 Conduct periodic check on QAQC filing systems to ensure that it continues to be updated. Liaise this activity with the Document Controller.




JULY 1998-DECEMBER 2000

SENIOR QA INSPECTOR

Fischer Rosemount Manufacturing (M) Sdn Bhd

R & R

Basic QA activities.


JAN 1995 – MAY 1996
Cleveland Bridge & Engineering
Qc Inspector

R & R
- Daily inspection
- Prepare & maintain procedures for controlling fabrication testing procedures
- Assured all welding procedures and welders are properly qualified

EDUCATIONAL BACKGROUND

Graduate - Malaysia France Institute- Advance Diploma in Welding Technology.

C. COURSES ATTENDED (Technical Development)

1. NDT Level II(MPI/DPI)
2. Practical Welding (up to 6GR)
3. Welding & Inspection of Dissimilar Metal
4. Inspection & Testing of Duplex Stainless Steel
5. Basic ISO 9001:2000 Requirements.
6. CSWIP 3.1 / 3.4 ( courses only )
7. Offshore Survival.


D. SKILLS

1. Knowledge in welding & fabrication technology
2. Knowledge in reading & interpretation of engineering drawings including P&ID
3. Computer literate (Microsoft Office, Word, Power Point & Excel
4. Knowledge in QA QC & inspection based on ITP
5. Knowledge in NDT & Destructive Testing.
6. Knowledge in WQT & WPQT
7. Posses’ good leadership skills

3. Computer literate (Microsoft Office, Word, Power Point & Excel

Knowledge in WQT & WPQT
7. Posses’ good leadership skills