Bachelors in MECHANICAL ENGINEERING Years of Experience:
Authorized to work in: Egypt Present Location: EGYPT, KENA Relocation: Qatar
1. Summary (Cover Letter) - CV/Resume Part 1 [Mandatory]
Ten years experience as a Piping Engineer in Petroleum, Power Station, LNG, Oil & Gas ;Level of experience include both engineering and site supervision .Familiar with codes, and standards (API, ASTM: ASME ……)
LICENCE MECHANICAL ENGINEER NO 11/5711 FROM EGYPTION ENGINEERING SYNDICATE
2. Work Experience - CV/Resume Part 2 [Mandatory]
DETAILED WORK EXPERINCE
PIPING SECTION HEAD : Consolidated Contractor In’l Co.
Pearl GTl project : Qatar
From 11/2007 till know
SENIOR PIPING ENGINEER : Snamprogetti Lummus Gas LTD
: Western Libya gas plant
: From 8/2004 to present.
From 4/2005 till know : In position of Senior Piping Engineer : Acting as a focal Point for Piping Construction team to ensure that all work is completed within the time ;budget and complies with the relevant Codes; Regulation and Standards.
Development and effective management of assigned staff which is the critical factor in achieving the existing standards requirement; Interface with the other disciplines within a matrix management structure to ensure that the highest level of service is provided to the client’s delight.
Job duties include planning; scheduling and providing work directions for all piping work as required . Reports and related data. Review technical submittals. Review drawing and coordinate with disciplines engineers where needed ; and ensure reviewed drawing are available to all parties . Coordinate with the contract supervisor to assure the required technical submittals are obtained from contractors;
Participate in the preparation of Field Change Requests and Change Orders
Supervise quantity take-offs for in field new drawing and design.
Punch list and test pack review and Hydro/Pneumatic testing planning and frequently witnessing.
System completions. (Three trains contain Around 17000 Ton of different piping material; 1650 Ton of supports materials; 11000 Isometric; 3500 Test Packages; 79 Systems)
From 8/2004 to 4/2005: Fabrication coordinator: Monitoring and witness activities on process piping spools on fabrication work shop. Physical check the work on progress to ensure that it conforms in accordance with contract specification and approved procedure. Insure that the inspections are carried out in line with approved inspection plan and/ or specification.
Reporting the progress and the status to the management.
Follow up the under ground piping activity.
PIPING ENGINEER : KBR-MWKL-TR
: Damitta LNG Plant.
: From 4/2003 to 8/2004
Duties Include From 4/2003 to 10/2003 : Fabrication shop supervising (212000 Dia Inches carbon steel, low temperature alloy steel and stainless steel) ;Reviewing the material receipt vouchers for piping, supervising workshop activity and control the progress , Manpower requirement planning; spools releasing , material traceability.
From 11/2003 to 8/2004 acting as Senior Piping Engineer during erection phase; monitoring the erection activity and solve and replay the piping construction technical queries also create a utility lines requested by the client and not in the basic design scope..
- Coordination between the construction subcontractors and NDE company and attend the daily progress meeting.
- System compilation and system turn over to commissioning.
PROJECT ENGINEER : HONEYWELL
: Abu Sultan Power Plant
: From 4/2002 to 2/2003
Duties Include : Supervision of Lube Oil System modification and replacement ; Non pressure piping isometric material take off ; weld map and spooling; drawing creation , manpower estimation; Budget of fabrication control , attend the progress meeting,
Coordinating the activity on site between the different disciplines
Electrical and instrumentation erection supervision.
BOP ENGNEER : ELECTRICITÉ DE FRANCE (EDF)
: SUEZ GULF POWER PLANT
: FROM 2/2001 TO 4/2002
Duties Include: Responsible for all water treatment plants erection activity (Desalination, Electrochloranation plant; Demineralization plant)
Heavy and light fuel tank drawing review, erection supervision and progress monitoring and reporting.
Loading and unloading fuel pump stations, fire fighting pump station erection.
Auxiliary boiler erection and its piping prefabrication, erection monitoring and supervision.
Compressor unit equipment and piping erection and modification supervision and progress monitoring
Electrical and instrumentation related to vendor packages erection and supervision.
Systems walk down, and turn over to commissioning.
PIPING ENGINEER : TECNICAS REUNIDAS ( TR )
: ALEX MINEROL OIL (AMOC)
: FROM 8/2000 TO 1/2001
Duties Include: Material take off; system break down form P&ID; Test Pack preparation, Testing, Reinstatement and system punch-list clearing and turn over to commissioning.
PROJECT ENGINEER : SIMPELKAMP
: NAG HAMDAY FIBER BOARD
: FROM 2/2000 TO 7/2000
Duties Include: Steel structure shop drawing review; fabrication and assembly activity supervision
Boiler erection and testing (package responsible).
ISOs extraction from general drawing
Dryer and pneumatic conveyer fabrication and erection responsible
PIPING ENGINEER : DAELIM ENGINEERING
: MEDOR REFINARY PROJECT
: FROM 8/1999 TO 1/2000
Duties Include: Test pack review; test preparation; testing.
PROJECT ENGINEER : El Rehab City
: EL REHAB CITY PROJECT (1ST STAGE)
: FROM 1998 TO 1999
Duties Include: Construction of water tanks; pumping stations; underground potable water system installation and testing, underground fire fighting network installation.
PROJECT ENGINEER : EL HOREA GROUP
: FLOUR MILLS
: FROM 1994 TO 1997
3. Education & Training - CV/Resume Part 3 [Mandatory]
BACHELOR OF SCIENCE OF MECHANICAL ENGINEERING
LEAD AUDITOR COURSE (ISO 9001:2000)
OSHA GENERAL SAFETY COURSE 1910
OSHA CONSTRUCTION SAFETY COURSE 1926
LEVEL II RT; PT & MT EXAMINATION
Project Management for engineer and professionals (shot course in American University in Cairo )
4. Computer Skills - CV/Resume Part 4 [Mandatory]
Knowledge of PDMS; aUTOCAD; NAVIS WORK
5. Other Skills - CV/Resume Part 5 [Optional]
6. Additional Information - CV/Resume Part 6 [Optional]