CV Instrumentat Engineer / Supervisor

Resume built for oil and gas job opportunities by a jobseeker with experience in Instrumentat Engineer / Supervisor - would you like to offer this candidate a job/contract employment?

CV/Resume ID no.: 80515
Last Updated: Saturday, May 31, 2008

Sub: Application for the Post of Construction Engineer Instrumentation/supervisor.


Respected Sir,

With reference through faithful sources, I came to know that there is a vacancy of Instrument Engineer, Instrumentation in your esteemed organization.
So, I introduce myself as an Instrument Professional with more than twelve & half years of excellent experiences in routine and shutdown maintenance as well as construction of large refinery oil & gas plants. I have participated in many plant Pre-commissioning and commissioning activities. I am also versed with experience in fire & safety system , maintenance 18 high pressure production wells head and control systems. I am well familiar in foundation field bus system.
I am enclosing herewith a copy of my resume for your kind perusal and hope it will meet your requirement.

Thanking you in anticipation sir,

EXPERIENCE PARTICULARS
Jan 2008 to till today
Joined WORLY PARSONS & ARABIAN INDUTRIES now working as an approved
Instrument Construction engineer for PDO Under EMC PROJECT
.
I am doing four projects
• SPARE DWD DEMOLITION SCOPE OF PUMP P-7434 at ZAULIYAHSTN
• SAHMA ADDITIONAL PUPM UPGRADION P-2888
• SAHMA FCS UPGRADATION
• SUWAIHAT RECLAIMED FUILED FACILITY.

May 2007 to dec 2007

Joined Larsen & Toubro Electromech LLC, Oman. Currently working as an approved Instrument Construction Engineer for Petroleum Development Oman (PDO, a Shell International unit) under Project No. – C331, Engineering & Maintenance Contract, North, Qarn Alam, Oman.

I have done three projects here in Qarn Alam.
 In Shairawal South fifteen loop transformer from DCS to Safe Guarding Lodging during Shut down periods.
 In Barik Depletion Compressor which is centrifugal compressor a variable speed planetary gear system driven by an HV Electrical motor, discharge cooler, Lube Oil Cooling System, other Auxiliary equipment along with instrumentation control. A new instrument air compressor system along with a driving system is installed in Barik Gathering Station. (Motor Capacity is 6.6 KV, 8.5 mega watt, Section Pressure 30-40 bar, Discharge Pressure – 80-90 bar.)
 During CPP shutdown Implementation of Fire & Gas system, there was a fifteen loops.

Role & Responsibilities:
 Set up a new control room with FoxPro DCS system and Honeywell IPS with Bentley Nevada machine monitoring system and fire & gas panels.

 Preparation of Site Mark-up Drawing & As built
 Distribution of Job according to the skills of the work force
 Control Document Review and Monitoring Instrumentation Work as per Approval Drawings
 To have a strong willing towards the completion of the job on the pre-estimated time.
 Coordination with design team Field troubles Incorporation.
 Coordination with planning team to develop work front management
 Material Procurement Specification Evaluation.
 Close Supervision over Calibration of Instruments, Control Cabinets Installation and Checking
 Supervision over Field Instrument Installation, Loop Checking and Pre-commissioning & Testing of Control and ESD Valves.



Dec 2002 to April 2007:

Name of the Company: Gulf Petrochemical Services & Trade LLC
(Contractor of PDO)
Designation : Construction Engineer, Instrumentation.

Role & Responsibilities:
 Set up a new control room with Foxboro DCS system and Honeywell IPS with Bentley Nevada machine monitoring system and fire & gas panels.
 Control Document Review and Monitoring Instrumentation Work as per Approval Drawings
 Close Supervision over Calibration of Instruments, Control Cabinets Installation and Checking
 Supervision over Field Instrument Installation, Loop Checking and Pre-commissioning & Testing of Control and ESD Valves
 Preparation of Site Mark-up Drawing & As built
 Distribution of Job according to the skills of the work force
 To have a strong willing towards the completion of the job on the pre-estimated time.
 Coordination with design team Field troubles Incorporation.
 Coordination with planning team to develop work front management
 Material Procurement Specification Evaluation.


THE JOB PROFILE DETAIL

Set up a new control room with FM-2000 and VESDA Fire and smoke detection and Alarming:-
Installation & commissioning of field instrument and control panel in 12 block valve station.
Installation of instruments for the new tank farm and commissioning it with the Enraf Tank management system.
Installation & commissioning of condition Monitoring system for the mainline & Booster Pumps
Proganest on line monitoring system:-

Automation systems :- safe guarding –Yokogawa pro safe plc
Field control – Yokogawa stardom controller.
Condition monitoring system-Bentley Nevada 3500.





Project: Zauliyah Station FCS up gradation, Zauliyah Water Injection
& Suwaihat DWD projects.
Client Name: Petroleum Development

 Change over the entire safe guarding loop of Zauliyah Production & Gathering Station to the new safeguarding PLC (HIMA) system from the old Relay Logic System.
 Change over the entire Control loop of running station to the new DELTA-V System.
 Erection and Commissioning of control panels.
 Installation & Commissioning of RTU.
 Modification in Relay Logic System.
Automation Systems: Safeguarding- HIMA PLC
Field Control- DELTA-V with foundation field bus
Control system.

Condition Monitoring- SKF VM-600

Project Name: Harweel Early Development Facility & Birba
Expansion
Client Name: Petroleum Development of Oman
 Installation & Commissioning 18 high pressure production wells head and control systems.
 Installation & Commissioning of instrumentation systems for the gas compressors (GRC, GBC & GIC).
 Installation & Commissioning of 4 manifold stations.
Installation & Commissioning of main Harweel Cluster Station.


Dec 2000 to Oct 2002

Name of the Company: B.O.C Gases
Jamshedpur-India

Designation : Instrument Foreman

Responsibilities:
 Installation & Commissioning of Instrumentation System in Gases Plant ,
 Operation, Maintenance ,Trouble Shooting & Shutdown activity,
 Man power control & allocation
 Preparation of as build drawing & test Pack
 Preparation & Development of detail termination schedule for technician.

Nov 1999 to Nov 2000
Name of Company: M.S.Al –Suwaidi Construction Company as Instrumentation Head Man

THE JOB PROFILES DETAILS
 Set up a new control room with FM-200 and VESDA Fire and smoke detection and alarming.
 Installation & commissioning of Field Instruments and Control Panels in Boiler Control room.
 Coordination with design team Field trouble in corporation.
 Material procurement Specification.
 Installation of Instruments for the new Boiler and commissioning it with the Yokogawa management System.



May 1994 to April 1999

Name of Company: Hyundai Construction Company H.P.C.L Mumbai
Sr .Instrument Technician

THE JOB PROFILES DETAILS
 Loop Checking calibration of different type Instrument.
 Maintenance of trouble shooting of different control Valve.
 Calibration of transmittal, Control valve, Switches (Flow temperature level pressure.
 Participate in shutdown activity

HSE Training by Petroleum Development of Oman as follows:
 Health, Safety & Environment Induction (HSE IND)
 Awareness & Escape (A & E)
 Enhance Site Supervision Work (ESSW Basic)
 Gas Testing course
 PTW Signatory course
 Job Hazard Analysis
 Basic life Support
 STOP for Supervisor

OMPUTER SKILLS & KNWLEDGE

 Operating System:- Windows 98, 2000, MS- Office 2000
 Programming:- C & C++, Auto- Cad R-14

construction