CV Piping Lead Engineer / Designer

Resume built for oil and gas job opportunities by a jobseeker with experience in Piping Lead Engineer / Designer - would you like to offer this candidate a job/contract employment?

CV/Resume ID no.: 81333
Last Updated: Thursday, July 3, 2008

Career over 16.5 years in the detail engineering of piping
including construction of refinery, Oil & Gas, Petrochemical & Palm oil and EC

AS Piping Lead Engineer and Principal Design Piping Responsible for following act:
- Review and approval of all changes.
- Coordination with inter disciplines, project team, client and vendors.
- Prepare engineering Man hours, Manpower estimation for performing required for design engineering work.
- Resolving of incomplete and conflicting input or output data.
- Prepare Piping layout & plan drawing piping section around tower, pump, drum, pipe rack compressor, exchanger, storage tank and ext.
- Making loading data for information, Prepare Isometric, Support location for drawing and isometric drawing, Final check of Piping Drawing and Isometric Drawing and Material take off.
As Field Engineer responsible for following activities:
- Prepare Field Change Sheet (Field Change Request) , Material take off, Line Check (Confirmation of line installed), Prepare Punch list and confirm of reinstatement after hydro test

Oct.’ 2007 ~ Present As Piping Lead Area WBS 190
Saudi Kayan Petorchemical Project. PT.KBR Indonesia
Responsible to design and review vendor drawing base on
Design, Issue RD , Change Log and coordination with team

January 1997 until September 2007 joint with JGC Indonesia
Nov.’06 ~ Sept.’07 As Piping Field Engineer
SGP Pre Furn Project (LMNG-SHELL Malaysia)
SGP Pre Furn Project is plan owner by SMDS and SHELL Malaysia and JGC as EPC
Company for the Project, During joint the project .He was assigned as Piping Fiel
Engineer, He was responsible for the Prepare Field change sheet, Material take off, Line check and Prepare punch list and etc.
Feb.’05 ~ Oct.’06 As Piping Lead Engineer for Offsite area
LNG-TANGGUH Project. ( Papua - Indonesia)PT.JGC Indonesia
Tangguh LNG Project is being undertaken by a joint venture of KBR, JGC and PFN to executed this Project. During joint this project .He was assigned as Piping Lead Engineer for Offsite Area. He was responsible for the Study piping layout and loading data for information other discipline at area LNG Jetty , Combo Dock , Flare Stack, GPFSB Building, Admin Dormitory , Common sleeper, , Turbine Cooler , LNG-Tank, Train-1 at Fractionation , Review with owner by SPR (Smart Plan Review) Coordination with KBR

Oct.’ 04 ~ Jan.’ 05 As Piping Lead Engineer.
JCP Estimation Project (Arab Saudi) PT. JGC Indonesia
This Project is Estimation. During Working at JCP Project, He was joint at JGC Yokohama – Japan around 3 month, He has capability to Prepare Engineering man hours & Manpower estimation for design engineering work, Coordination with inter disciplines, Project team, Pipe routing around sleeper, pipe rack , tank and making loading data for information, Material take off,
Juny.’ 04 ~ Oct.’ 04 As Piping Lead Engineer.PT.JGC Indonesia
Naphtha Stabilizer Project ( Tuban East-java – Indonesia)
During joint with this Project, He was assigned as Piping Lead Engineer
He has capability to Prepare Engineering Man hours and Man power Estimation for design engineering work, Coordination with inter discipline and Study Piping Plan Around Tower , Stabilizer boiler, Pump, Stabilizer Receiver and Check Isometric, MTO
Jan’ 04 ~ May.’ 04 As Piping Lead Engineer.
GASCO Project ( Abu Dhabi Gas Industries)PT. JGC Indonesia
The location Gasco Project is Abu Dhabi, During joint with this project He Assigned as Piping Lead Engineer, He has Capability to Prepare Engineering man hours and Man power Estimation for design engineering work, coordination with inter disciplines and Pipe routing around Jetty, Making loading data around Jetty , MTO and Final check Isometric.
Aug.’ 03 ~ Jan.’ 04 As Piping Lead Engineer PT. JGC Indonesia
Divertion of PSV Desalter Poping Line for CDU ( Balikpapan)
The location Project in Balikpapan – Indonesia and type of project is FEED, During joint with this project, He has Capability to Prepare Engineering Man hours and Man power Estimation for design Engineering work, Coordination with Inter Discipline Project Team, Site Survey, Make Key Plan Piping Layout, Piping Plan for steam Trace and Isometric.
Dec.’ 02 ~ Juny.’03 As Senior Piping Designer and Checker.
Refinery Revamp Phase – 1 Project (Balongan West Java) PT. JGC Indonesia
During joint with project He was responsible to Site Survey, Make Plot Plan, Piping Plan, Isometric, Supported and Material Take off.
May.’ 02 ~ Nov.’ 02 As Piping Lead Engineer
Tie-In LNG Gas Supply Project (Nigeria) PT.JGC Indonesia
During joint with this Project He was responsible to Prepare Man hours and Man power, Pipe Routing and Material Take off.
Juny.’01 ~ April.’02 As Piping Designer and Checker
LNG – WLGP Project(Westren Libya Gas Project)PT JGC Indone
WLGP Project is Biggest Project in Libya, JGC as EPC company for that Project. During joint with this Project, He wasResponsible to Prepare piping Plan around KO Drum , Flare Stack, Burn Pit and Make Loading Data Around Rack, Sleeper and Equipment for information, Make Isometric, Supported, Final Check, Review model by SPR.
Jan.’00~Juny.’01 As Piping Designer /Checker
Sakhalin LNG Project PT. JGC Indonesia
Sakhalin Project is Biggest Project in Rusia, JGC as EPC company for that Project. During joint
with this Project, He was Responsible to Prepare piping Plan ,Burn Pit and Make Loading Data
Around Rack, Sleeper and Equipment for information, Make Isometric
Mach.’99 ~ Dec.’ 99 As Piping Designer
Hamanaca Crude Upgrading Project PT.JGC Indonesia
Hamanaca crude upgrading Project is Biggest Project in venezuela JGC as EPC company for that Project. During joint with this Project, He was Responsible to Prepare piping Plan ,Burn Pit and Make Loading Data Around Rack, Sleeper and Equipment for information, Make Isometric, Supported,
Feb.’98 ~ Feb.’ 99 As Piping Designer
Turmenistan Polypropyline Project . PT JGC Indonesia
Turmenistan Polypropyline Project is Biggest Project in Turmenistan JGC as EPC company for that Project. During joint with this Project, He was Responsible to Prepare piping Plan , Make Loading Data Around Rack, Sleeper and Equipment for information, Make Isometric, Supported,
Oct.’ 97 ~ Jan.’ 98 As Piping Designer
LNG GAS SUPPLY Project Project PT.JGC Indonesia
LNG GAS Project is Biggest Project in Negeria JGC as EPC company for that Project. During joint with this Project, He was Responsible to Prepare piping Plan , Data Around Rack, Sleeper and Equipment for information, Make Isometric, Supported,
Jan.’97 ~ Oct.’97 As Piping Designer
Corridor block gas Project PT.JGC Indonesia
Corridor gas Project is Biggest Project in South sumatera Indonesia JGC as EPC company for that Project. During joint with this Project, He was Responsible to Prepare piping Plan , Data Around Rack, Sleeper and Equipment for information, Make Isometric, Supported,
March.’1996 to Jan.’1997 – As Piping Designer
PT.Inti Karya Persada Teknik (IKPT Jakarta)
TRAIN A/B Tie-in Steam Line Project.
Aug.’1995 to March 1996 – As Piping Designer
PT. Flour Daniel/PT.Indasana Gemareksa
Bottle Necking Refinery Project (Cilacap
Aug.’1994 to July.’1995 –Field Engineer.
PT. Titis Sampurna
Hexamine Ambicarb Project. Bontang
March.’1993 to Aug.’1994 As Senior Piping Draftsman.
PT. Ceria Worly Engineering
GAS Lift FSA, FSWA,FZA Well Tripod Platform Project(offshore)
March.’1990 to April 1993 As Piping Draftsman.
PT. Rekayasa Industri
Pusri 1-B Ammonia Project ( Palembang

Education University of National Jakarta Subject Mechanical Engineer

Awards/Training.
Management Skill
JGC Indonesia

Design Piping Plan /Plot Plan,
Tower,Compressor,Cooler,Exchanger, Pipe Rack ,
JGC Indonesia

Loading Data for information
JGC Indonesia.

Work Attitude for Japanese.
JGC Indonesia

Autocad
Microstation
PDS ( Training only)
SPR (Smart plan Review)
Excel and word

Piping field Engineer