CV Project Manager of oil & gas epc projects - onshore / offshore

Resume built for oil and gas job opportunities by a jobseeker with experience in Project Manager of oil & gas epc projects - onshore / offshore - would you like to offer this candidate a job/contract employment?

CV/Resume ID no.: 82132

Kind Attn Sir / Madam,
Greetings.

I introduce myself as Engineer working as Project Incharge Manager for oil & gas epc projects.


Position- Project Mangaer / Project Superintendent Engineer for Oil & Gas EPC projects - India /Aborad.


I have 22 years of Epc Project Experience.


I can take the following scope of works in oil & gas epc projects-

a)TENDERING,PREPARE SCOPE OF WORK,

b)FOLLOWUP WITH TECHNICAL CONSULTANT FOR THE PROJECT ,

c)PROJECT SITE CO-ORDINATION & EXECUTION -SITE SUPERINTENDENT ENGINEER,

d) CO-ORDINATION WITH PROJECT CONTRACTORS,

e)CONTRACT CO-ORDINATION & EXECUTION,

f)PROCUREMENT,

g)PROJECT CONTROL,

h)EXECUTION OF PROJECT CONSTRUCTION PHASES,

I)CO-ORDINATION OF THIRD PARTY SURVEY, CERTIFICATION & Inspection,

j)Precommissioning,

k)Commissioning.


My options are open for SINGAPORE/AUSTRALIA/ EUROPE / QATAR/ UAE/ CANADA/ India /Malaysia .


I am available for both short term / long term/ rotational- On,Off Projects.

WORK EXPERIENCE :

a) From Nov. 2007 onwards -.

Sansu Technologies - This isa consulting company for ONGC Projects in India –Worked at both Offshore & Onshore oil& Gas as Project Manager

Scope of Work :- EPC Offshore - Oil & Gas LNG PROJECTS, TOPSIDES, JACKETS - gas gathering platform, for ONGC INDIA- Equipment / piping – Fabrication / Erection / Testing, NDT and Commissioining / Handover.

Responsible for the installation, hook up and commissioning of the wellhead platform plus two conventional platforms and hand over to Operations personnel. Offshore work scope exceeded 100,000 man hours.
Manpower on Site:- Junior engineers- 50, skilled manpower- 2500, semi-skilled- 400

Worked with the same organization earlier between (2001– 2005 FEB) & (2005 AUG- 2007 JULY) as Project Incharge – Execution phase and Follow Up withthird party ertification.
b) (AUG – OCT ) 2007 - OFFSHORE & ONSHORE

Ipedex Qatar (Project for QPD Doha Qatar) & Qatar Petroleum Devlopment (QPD) Co - Project Incharge Suptd. (Mechanical Engineering Section) Offshore at platforms /Onshore at office.

Scope of work:
• Co-Ordinating with Engineering Consultants, M/s WS Atkins UAE, and other Major contractors , QPD Project Field development department, QPD Production development department, for the new project for its NEW EPC PROJECT, as well as its Second Stage Field development Hook Up for new Wells.

• Executeing Tenders / Scope of work agreement for contract, discuss commercial and technical terms of contract.terms

• Incharge of Main Contractor, Vendors, Sub-Contractors, Third Party Inspection Company, Certification agencies, Verification for Codes and Standards throughout the EPC project stage.

• De-Commissioning / Commissioning Phase of Offshore wells,
CONSULTANT Engineering Consultant for any clarification or
Modification if necessary etc.

c) 2005
Brunel Energy Qatar WLL - Oil & Gas Consultant Company as Project Inchargeofoil & gas unit of process plant Doha Qatar –Onshore .

SCOPE OF WORK:-Project Management,Coordination & Control of EPC Oil & Gas LNG PROJECTS- new equipment –Reformer reheater / piping – fabrication / erection/ testing, NDT and Commissioining/ handover.

No of manpower:- junior engineers- 40, skilled manpower- 2000, semi-skilled- 300

d) 1995 – 2001

Annai Arul Enterprise, Chennai, India - OFFSHORE & ONSHORE as Project Incharge
SCOPE OF WORK:- .-Project Management, Co-ordination & Control of EPC Oil & Gas OFFSHORE LNG PROJECTS.

Assisted by a team of 10 engineers and inspectors,I was totally responsible for all facilities,

piping, Static Equipments, and mechanical systems on the Platform(Mumbai). This was the

first offshore project handled by this Company and repair facility, which required substantial

management to achieve the required schedule and quality. Furthermore, engineering and

procurement was performed in Delhi, therefore considerable liaison was required to ensure

timely delivery of equipment and materials.

e) 1994 – 1995 :

Project System, Saudi Arabia – OIL & GAS PROJECT CONSULTANTS for ARAMCO- OFFSHORE & ONSHORE as Project Incharge, Sr. Engg. in rank

SCOPE OF WORK:- Project management,co-ordination & execution of EPC oil & gas projects -Onshore /Offshore.

Responsibilities : Based offshore during the weldout and hook up of the deck to hull, Offshore Platform installation and all non structural outfitting. Assisted by a team of 17 discipline engineers and I was responsible for directing and supervising the work force of 4 main Contractors in completing the deck to hull hook up. Peak manning levels were 350 with a total manhour content of 150,000 man hours.



f) 1991 – 94 :

Ashok Leyland, Surat, India - ONSHORE petro-Chemical Project as Sr. Engineer, EPC – Onshore.

SCOPE OF WORK:- Project management,co-ordination & execution of of Petro-chemical EPC Project.


Responsibilities: Assisted by a team of discipline engineers and inspectors, my duties included checking the Contractors work for conformance with drawings, specifications, schedules and evaluating claims as well as liaising with engineering to ensure timely delivery of drawings and equipment. I was also involved in planning work activities, developing manpower requirements and schedule for erection outfitting and commissioning.
Manpower:- Junior engineers- 30, skilled manpower- 1500, semi-skilled- 500-.


g) 1989 – 1991 :

Eswaran & Sons Ltd, Chennai , India - ONSHORE as Project Senior Engineer – Offshore /Onshore .

SCOPE OF WORK: Project Management,Co-ordination & Execution of oil & gas EPC Projects.

Responsibilities :- Based Onshore during the weldout and Fabrication of the Equipments, Installation and all non structural outfitting. Installation was done Offshore. Assisted by a team of 50 discipline engineers and was responsible for directing and supervising the work force of 10 main Contractors till final Commissioning .
Manpower:- Junior engineers - 50, skilled manpower- 2500, semi-skilled- 300.


h) 1986 - 1987 :

Smart Hydroflex, Chennai, India - ONSHORE - Project Engineer, EPC

SCOPE OF WORK:- Project management, co-ordination & execution of oil & gas EPC Projects.


Responsibilities are :- Based Onshore- Refinery Project during the weldout and Fabrication of the Equipments, Installation and all Tesing/Inspection Follow-up. Was responsible for directing and supervising the work force of 8 main Contractors till final Commissioning / Handover
Manpower:- junior engineers- 40, skilled Manpower- 2000, semi-skilled- 400.-.


g) 1985 – 1986 :

Ragavendra Enterprises, Chennai, India – ONSHORE Project Engineer, EPC

SCOPE OF WORK:- Project management, co-ordination & execution of oil & gas EPC Projects.


Responsibilities :- Based Onshore- Petro-Chemical Project during the weldout and Fabrication of the Static Equipments, Installation and all Tesing/Inspection Follow-up. Assisted by a team of engineers was responsible for directing and supervising the work force of 5 main Contractors till final Commissioning / Handover .
MANPOWER:- JUNIOR ENGINEERS- 20, SKILLED MANPOWER- 1500, SEMI-SKILLED- 500

"Education:

Exam / Degree School/College/
University % / Grade Subjects

B.E. (Mechanical) Madurai University
College – ACCET I Class Power Plant Engineering, Production Planning & Control,
Automobile Engineering, Non-conventional Energy Resources

P.U.C American College, Madurai 71.4 % Maths , Physics, Chemistry

I.C.S.E S.D.A High School, Madurai Grade 4 to 6 Maths , Physics, Biology, Chemistry, English


TRAINING & CERTIFICATION :

• ASNT LEVEL II – NDT IN DPT/ MPT / RT / UT.

• STCW95 BASIC TRAINING FOR OFFSHORE PROJECTS - PST/ EFA / PSSR/ FPFF

COMPUTER SKILLS:-

1998:-PGDCA COMPUTERS- MS OFFICE/ORACLE

PROJECT MONITORING USING-PRIMEVERA P3/ MS Projects

Skills :-

AREA-TOPSIDES, JACKETS, SUBMARINE PIPELINES,REFINERY ,GTL- Gas to Liquid EPC Projects

a) All static equipments fabricated /erected/ tested/ commissioned:-


b) piping fabricated/erected/tested/commissioned-(TOPSIDES, JACKETS):- offshore-hook-up /onshore –oil & gas projects, piping accessories

c) site incharge for- (TOPSIDES, JACKETS) -offshore platform-hookup /
onshore GTL- gas to liquid projects etc


d)Inspection/Survey , testing & expediting-

(TOPSIDES, JACKETS,REFINERY,GTL- Gas to Liquid EPC Project)
of All STATIC AND ROTARY EQUIPMENT used in OIL & GAS PROJECTS--Inspect All Project details with reference to (Quality Control)- Inspection Standards as follows:-
pressure vessels - API 510,
fired boilers & heaters – API RP 573,
piping- API RP 574
pressure release valves – API RP 576
tank repair / inspection /alteration- API RP 653. & and other standards used are -asnt, asme and aws standards.

e)Vendor development and consultation with various CONTRACTORS (Contract Management),

f)Third party inspection co-ordiantion-(TOPSIDES, JACKETS, SUBMARINE PIPELINES,REFINERY/GTL-Projects)- Project Monitoring using computers, Implementation of technologies in New Projects.

g)Manpower Handled- Multinational Manpower - Skilled/
Semi-Skilled / Technical Foreman / Supervisors / Site Engineers / Contractors Representatives( Mangers/ SUPERINTENDENTS ) Etc.