CV Construction Supervisor, corrosion control of gas and oil pipelines

Resume built for oil and gas job opportunities by a jobseeker with experience in Construction Supervisor, corrosion control of gas and oil pipelines - would you like to offer this candidate a job/contract employment?

CV/Resume ID no.: 82424
Last Updated: Tuesday, August 5, 2008

I am graduate in Mechanical Engineering from NED University and I take the liberty to apply for the above mentioned post.
Having more than thirteen years of post graduation experience in industry as mechanical engineer and worked as Senior Mechanical Engineer in multinational oil company, Fauji Oil Terminal and Distribution Co (FOTCO) Port Bin Qasim Karachi, with special attitude towards operation, maintenance and projects of Oil Terminal handling HFO ,HSD & CRUDE OIL tankers.
I am Certified Internal Corrosion Technologist from NACE USA and have good
experience of Project, maintenance and operation of petroleum terminal.
Presently I am working with CB&I ,at Cabinda Gas plant project ,as Construction supervisor .
I feel to be the right candidate you are looking for, enclosed herewith find my detail resume for your kind consideration.

EXPERIENCE (Overall 14 years, Age 39 years)

Nov‘ 07-To Date Construction Supervisor
Chicago Bridge & Iron Company (CB&I ) ,Cabinda Gas Plant Project CABGOC ,Angola

• Presently working as Construction Supervisor for Coating ,insulation & fire proofing of structure ,piping ,modules and equipment with CB&I (main contractor for Chevron Texaco) , CGP Malongo ,Angola
• Responsible for planning, scheduling for material and erection of structure, piping and mechanical equipment of Gas plant. Duties include tracking job production , tracking job cost and manhours,verify material meets the code and standards
• Planning, scheduling and executing of protective coating, insulation and fire proofing for structure and plant piping.
• Experienced in project management and vender surveillance both in field and shop, inspection of piping and structural steel fabrication and installation turn around ( Shut down ) , shop and field inspection of vessels, storage tanks , heavy equipment , inspection ,testing and maintenance of valves , Coating ,insulation and fire proofing inspection
• Responsible for all documentation and final documentation of packages.
• Performed various inspections onshore and offshore ,project sites and at vender facilities during the removal of existing coating and , surface preparation of new steel and application of various protective coating system using multiple coat application ,verification of vender compliance to purchase and specification.


Apr ‘ 98-To Nov’ 07 Senior Mechanical Engineer (Maintenance & Projects)
Fauji Oil Terminal & Distribution Co. (FOTCO), Karachi, Pakistan
Job Summary

• Procurement, inspection, testing, installation and commissioning of marine loading arms worth US$ 5 million from FMC France
• Installed successfully RCMA Marine Loading Arms at FOTCO Jetty and tie in with existing 36” and 30” diameter product pipelines, used for off loading of Crude oil, HSD and HFO from 25 to 75 DWT vessels.
• Executed fabrication, erection & commissioning of 30”, 12”, 8”, 4”and 2” diameter product & utility pipelines at FOTCO terminal.
• Day-to-Day Project planning ,handling, Preparation & Review of Bid Document, Design Document, Project Specifications, BOQ, Construction Drawings and As Built Drawings keeping in view the relevant codes and standards.
• Worked as Project Engineer in laying 30” dia 4 Km long White Oil Pipeline. Carried out calculations for pressure drops, suitable diameter of pipeline against required flow rates with respect to berth occupancy. Provided Engineering assistance in mechanical design and specification for modifications or new installations. Carried out project costing and planning with respect to human and material allocation. Evaluated bids for contractors.
• Directly supervised construction, installation, tie-ins, hydrotesting and commissioning of pipelines, structures and mechanical equipment.
• Worked as QA/QC team member, reviewed & carried out qualification of welding procedure specification, welder performance tests in accordance with ASME & ANSI standard, listed qualified welders, welders performance records, carried out visual inspection of all field joints, Carried out receiving inspection of all materials, examined mill test certificates of line pipe.
• Inspected 30” diameter line pipe as per API 5L Grade B used for White Oil Pipe Line at Data Steel Pipe Industries RahimYar Khan
• Handled procurement of Engineering Materials, Equipments & Lubricants, which included material specification finalisation as per engineering codes of practice. Estimated for annual requirements of materials & spares, evaluation & listing of sub-contractors, receiving inspections, inventory management, identification & availability of critical stores.
• Developed, implemented and continuously improved the Computerized Maintenance Management System (CMMS) MP-2, including Trouble Shooting, Preventive & Predictive Maintenance. Prepared detailed Maintenance Reports, Equipment Check Lists. Scheduled and carried out Monthly, Six Monthly and Annual Maintenance of Stationary & Rotary equipment (Sullair compressors , Gould’s pumps, Floway vertical Turbine Pumps, Rotating Counterweight Marine Loading Arm ,Pedestal Mounted Offshore Gangway Crane, )
• Developed procedures, established spare parts/material requirements their sourcing and executed all Breakdown/Shutdown maintenance. Suggested and implemented cost saving proposals for major repairs & modifications of the facility.
• Conducted pipeline operations with multiple products through single line using batch pigs, maintenance of Pipeline Systems including Pipeline Pigging, Expansion & Contraction monitoring, Expansion Joints and pipeline insulation works. Analysed corrosion causes of offshore structure and equipment, selected and implemented corrosion resistant materials and coatings
• Assisted and successfully implemented an operational plan for the export of “bp’s” crude oil produced at Badin Block through existing 30” dia FOTCO’s and 24” dia PSO’s pipeline.
• Prepared annual budgets for operations and maintenance department. Planned and conducted in house training programmes on efficient operations and maintenance of installed equipment.
• Performed duties as Operation Engineer in handling of Crude, HSD and HFO on and from 75000 DWT vessels.
• Worked as an Internal Auditor by the Management of FOTCO for IQMS (ISO9001-2000, OSHAS18001, and EMS 14000). Written & Compiled IQMS system procedures, manual and plan for the company in the record time of five months. Helped getting certification for the company as internal quality auditor.
• Carried out OSHAS 18001-1999 and EMS ISO 14001-2004 Risk and Impact Assessment of Fauji Oil Terminal.

Hands on Experience

SULLAIR Compressors (CAT 3306 Engine), FIRE Engines Caterpillar 3412 Engine , Diesel Generator CUMMINS , Centrifugal and Positive displacement pumps, Hydraulics and Pneumatics controls, Pipeline operations, pump selections, Pipeline Pigging, Cathodic Protection Systems (impressed current, sacrificial anodes), Marine Loading Arms, Fire Fighting Equipments, Emergency Shut Down Valves, Welding and NDT, Hydrotesting, API, ASTM, ASME codes, Repair and Maintenance of Valves upto dia 36”.Project executions and site supervisions.


July ’96– March ’98 Maintenance Engineer (Beeta Enterprises)
PAN PACIFIC PVT LTD KARACHI
Job Summary

• Performed trouble shooting, planned preventive maintenance, predictive maintenance, daily inspection and breakdown maintenance of Electro-Hydraulic and Pneumatic Systems
• Inspected tin plate as raw material for manufacturing of containers.

• Maintained compressors, dynamic seamers, shearing machines and diesel generators of 100-500kva.
• Organised production and planning for the optimum output on shift basis.


May ’94 – Feb ’96 Project Engineer
ATC RICE MILLS( PVT) LTD LAHORE Pakistan
Job Summary

• Installed independently 120 ton per day capacity rice mill of Yanmar Agricultural
• Equipment Japan, erected the steel structure and building for the machinery.
• Designed a complete dust collection hygienic system to comply the export standard.
• Managed the entire activities of consignment preparation from production to dispatch.
• Installed and commissioned successfully 80 channels, Electronic color sorting machine of SATAKE Corp. Japan at White Pearl Rice Mill.
• Modified paddy drying and husking system of YANMAR
• Managed the entire activities of consignment preparation from production to dispatch

TRAINING/WORKSHOPS

• Trained in IIF programme by CB& I
• Accident Prevention Course 1 ,CB&I CGP Angola , Feb 2008
• “Internal Corrosion for Pipelines “ From NACE U.S.A (Certified Internal Corrosion Technologist ) , June 2006
• Member National Association of Corrosion Engineers NACE U.S.A ( membership no 214951-00 )
• “Port Facility Security Officer” PFSO Course from STET Singapore Feb,2007
• “Pumps, Compressors” short course - PETROMAN.
• "Piping Engineering" short course - PETROMAN.
• “Industrial Hydraulics Application and Troubleshooting” short course - PETROMAN.
• 10 day course on “Steel Structures”, “Welding Practices & NDT”, “Air-conditioning Systems” – PETROMAN
• “Advanced MaintenanceManagement” short course – NED UET & PETROMAN.
• “Elementary First Aid ” – Pakistan Marine Academy
• “Advance Fire Fighting” – Pakistan Marine Academy
• “ Internal Auditing for ISO 9000 ” –Pakistan Institute of Management


EDUCATION

1988 – 1993 NED University of Engg. & Tech. Karachi, Pakistan.
First Div. (71%)

Bachelor of Mechanical Engineering B.E (Mech)

COMPUTER KNOWLEDGE

MS Office 2000, AutoCAD 2000, Computerised maintenance management system CMMS (MP-2) and M.S Project

N /A