CV Electrical Engineer - Shell Brunei Production and Maintenance Excellence Department

Resume built for oil and gas job opportunities by a jobseeker with experience in Electrical Engineer - Shell Brunei Production and Maintenance Excellence Department - would you like to offer this candidate a job/contract employment?

CV/Resume ID no.: 83838
Last Updated: Wednesday, September 10, 2008

I have served as successful Electrical Engineer with 16 years of experience in the Oil /Gas /Refinery / Petrochemical Sector with extensive working experiences in Maintenance, Project Management, and SAP (PM Module implementation) in the Electrical Sector, complimented by Electrical Engineering Degree

I am currently employed with Shell Petroleum Brunei, as an Electrical Engineer and attached with the Production and Maintenance Excellence Department.

I am a candidate who is team oriented and is able to deal with people in various departments. I am confident that I possess these skills, which will help me to perform the job efficiently and effectively.

I am certain that my presence will prove to be beneficial to the organization. As such, I would welcome an opportunity to speak with you to evaluate your needs & share my ideas.

Organizational Experience

Shell Petroleum (Exploration & Production), Brunei since May’04
Electrical Engineer - Production and Maintenance Excellence Department

Production and Maintenance Excellence is central department provides advises to the onshore and offshore assets and formulate long-term strategies, optimize equipment performance, minimize deferment and maintenance costs, and ensure the compliance of the equipment technical integrity and standards.

 Looked after job responsibilities like;
 Maintenance Management, Process Improvement Plans and Implementation.
 Ensuring Quality Assurance.
 Quality Initiatives like ACW (Autonomous care workshop), SOS (site ownership scheme), FAIR (Focused Asset Integrity review), SAP data clean up, Hazardous area equipments integrity verification

 Provide electrical advice and services to support asset units/services units (AU/SU).
 Formulate operability studies, maintenance philosophies, work instructions, procedures (MJRs) and implementing maintenance strategies (MRP/RCM/FEMA/IPF) and plans to safeguard the technical integrity of asset.
 Efficiently prepared failure analysis, preventive, predictive and breakdown reports for minimizing downtimes by providing quick turn around responses and efficient solutions.
 Ensure availability of facilities through technical inspections, FAIR and HAC audits, advising AU/SU on equipment procedures and systems.
 Provide technical expertise for FRPC’s and manages FRPC prioritization; provided input to engineering projects and conceptual design and participating in HAZOP's and HAZID's.
 Participate in technical and HSE audits.
 Possess thorough knowledge of reliability-based maintenance (RBM), maintenance strategy review (MSR); conditioning monitoring, root cause analysis (FEMA) and reliability centered maintenance (RCM).
 Pivotal in end-to-end planning and execution of electrical projects including conceptual design, basic and detailed engineering, extensive experience in conducting tests and checks, start-up, Pre commissioning and commissioning of electrical equipment’s.
 Functional experiences in PM, MM and PS modules.
 Designed & implemented effective procurement schedules along with finalizing the specifications of the spare parts and establishing the quality & quantity limits.


Petrokon Utama Bhd Sdn, (Shell Petroleum Brunei) Jan’03 - Feb’04
Engineer - SAP Support

 Successfully implemented SAP – Plant Maintenance Module. (Migration from legacy MAIS to SAP system)

SAP R/3 PM, implementation, master data cleaning and compilation. Preparation of plant maintenance task list (preventive maintenance work scope, operations sequence, defining maintenance frequencies and strategy’s, identifying material requirement for maintenance activity, assigning man hours, work centres and planner groups, identifying external services involvement, preparing maintenance plan & scheduling details etc) Well conversant with functional location and bill of material master data preparation and procedures


Ibn Rushd – Saudi Arabia Nov’98 - Jan’03
Electrical Engineer

The Company is a new Petrochemical plant, affiliates to SABIC, Producing Paraxylene, Benzene, PTA (Purified Terapthalic Acid) and Polyester.

 Distinction of pre-commissioning and commissioning of electrical equipment’s for substation and plants
 Providing electrical specialist advice and services to field maintenance
 Facilitated relationship management with vendors for technical and material queries.
 Involved in carrying out equipment failure analysis, up dating equipment history, preparation of preventive and predictive maintenance schedules, establish equipment’s monitoring parameters, preparation of job procedures and switching procedures, executing alterations and modifications.
 Served as SAP team leader of engineers for preparation of spare parts Interchangeability record (SPIR’S) for the entire complex electrical system (16000 line items) review and revise of material quotations and inspection of materials
 Successfully conducted failure analysis and conducted a root cause study for the first failed trial run test of 18.5 MW and 13.8 KV, Motor
 Received a certificate of appreciation towards cost saving by the Company President Ibn Rushd SABIC.


Previous Assignments

Jun’92 - Feb’98 Mina Al – Ahmadi, Refinery, Kuwait Electrical Engineer

Oct’91 - May’92 Randhir Engineers, India Project Engineer Electrical

Education

Bachelor of Engineering (Electrical) University of Bangalore, India in 1991

Training / Courses

 Managing hazard at the work place, conducted by Megamas training Company, Brunei
 Permit to work for supervisor, conducted by Megamas training Company, Brunei
 HSE familiarization for senior staff, conducted by Megamas training Company, Brunei
 Supervising HSE, conducted by Megamas training Company, Brunei
 Certified equipments in hazardous area, conducted by Shell Petroleum Brunei
 Electrical safety rules, conducted by Shell Petroleum Brunei
 Incident investigation course, conducted by Shell Petroleum Brunei
 Plant fire & safety, conducted by Shell Petroleum Brunei
 Senior first aid (St Johns Ambulance Australia)
 Hearts and mind workshop, conducted by Shell Petroleum Brunei
 High voltage equipments and failure analysis course conducted by Shell Petroleum Brunei and facilitated by Professor Liew Ah Choy from National University Singapore
 Root cause analyses workshop, conducted by Shell Petroleum Brunei, facilitated by Apollo - Australia
 Relationship awareness and team development, facilitated by CFBT education services Brunei
 Basic fire fighting, conducted by Ibn Rushd (SABIC)
 Electrical maintenance and problem analyzing, conducted by ISCOSA Saudi Arabia
 Effective material management, conducted by Ibn Rushd (SABIC)
 Crash course on life saving – St John Ambulance Australia
 Root cause analyses, conducted by Shell Petroleum Brunei and facilitated by Shell Exploration and Production Malaysia
 Competence assurance system (CAS) A1/A2 assessor, facilitated by Sarawak Shell Malaysia.
 Boiler training course, facilitated by Kejuruteraan Stimdang Sdn. Bhd, Malaysia
 Power quality course conducted by Shell Petroleum Brunei and facilitated by Professor Liew Ah Choy from National University Singapore
 Electrical safety course for Senior authorized electrical persons (SAEP), conducted by Shell Petroleum Brunei and facilitated by VI Power Malaysia
 The 7 Habits of highly effective people by Stephen R. Covey, facilitated by Shell Petroleum Brunei
 Tropical Bosiet including travel safely by boat and tropical EBS, OPITO approved, conducted by Megamas training Company, Brunei
 Participated in 2 days of IECEX Industry symposium at Brunei
 Electrical protection relay tests for primary and secondary injection, conducted by Omicron Austria
 Maintenance Management, conducted by Shell Global Solutions Netherlands

Fully conversant with SAP PM, PS and MM mosules and also MAIS System

Conversant with MS Word, Excel, Power Point etc

Working Experiences on Electrical Equipments

115KV (GIS switchgear) 140MVA transformer, 115/34.5KV
18.5MW motor, 13.8KV Un-interrupted Power Supply (UPS), 3Phase, 350KVA
Gas Turbine, Micro-turbines, Diesel Generators and the Power management system
Electrical Protection relays and tests for primary & secondary injection
Battery Chargers and Batteries under Frequency Load Shedding System
IS Limiters Power Disturbances Analyzers
Fire Alarms & Fire Extinguishing System Variable Speed Drives
Annunciation System Motor Control Center (MCC)
Auto Change over System Current limiting reactors
Motor Operated Valves (MOV), Desalters, Soot blowing system, Elevators, EOT Cranes, Conveyors, Cathodic Protection and W/S Machines

Working Experiences in Facilities/Plants

Offshore Oil and Gas production platforms, jackets and Onshore Oil Wells, Crude Oil terminal and Gas Plant (LNG)
CDU’s (distillation) HP ARD ARDF GOD
KD Tank Farm Utilities Incinerator ETWP
LPG PTA Aromatics Steel Plant CDU’s (Dehydration)
Water Treatment Plant Emulsion Plant Acetic Acid Plant
Slop and Sludge Treatment Plant Effluent Treatment Plant (ETP)