CV Welding Inspector CSWIP3.1, Structural & Piping Inspector (QA/QC)

Resume built for oil and gas job opportunities by a jobseeker with experience in Welding Inspector CSWIP3.1, Structural & Piping Inspector (QA/QC) - would you like to offer this candidate a job/contract employment?

CV/Resume ID no.: 85337
Last Updated: Saturday, October 18, 2008

I am a qualified welding inspector with CSWIP 3.1 and OHSAS 18001 Internal auditor Certification. I'm having total eight years of experience out of which 5 years abroad. Presently I am working with Good Earth Maritime Limited, as welding inspector & quality control In charge for entire fleet of ships which were being build at Hindustan

Shipyard limited.

EMPLOYEE IN INDIA: Good Earth Maritime Ltd

The company: Good Earth maritime is one of the major fleet owners. To strengthen their fleet they have ventured into ship building. Presently Hindustan Shipyard. Vizag is building 10 cargo vessels.

To reinforce their productivity. G.M.L. has started a sister concern production unit namely Visakha Ship Building (p) ltd. Presently VSBL having 1200 man power with 150 plus Qualified welders.

Responsibilities: I am responsible for the Production and Quality of the Job. I am organizing the welding teams in all departments such as Fabrication, consolidation, piping and out fit.


Position Held: Welding Inspector
Period: 16 Jun.2006 to till date
Address: Hindustan Shipyard Ltd
Gandhigram (po), Visakhapatnam-530005.


PROJECTS INVOLVED:

Project & Project No Good Providence, Good Princesses, Good Pacific
Year / Type 2006 to till date
Client Good Earth Maritime Ltd.
Nature of Job Welding Inspector


Nature of Jobs:

• Responsible for the entire ship’s quality of welding..
• Conducting test to Qualify welders.
• Witnessing WPS and PQR.
• Review shop assembly drawings against engineering drawings to ensure compliance
• Approving the welding procedures.
• Liaise and co-ordinate with classification surveyor to carry out inspection
• Co-ordinate Non-Destructive Tests (NDT) & Review radiography films.
• Pressure testing the pipe line


EMPLOYEE IN SINGAPORE: Jurong Integrated Services (P) ltd.
Position Held: QA/QC Inspector
Period: 13 Aug. 2001 to 08 Apr 2006
Address: Jurong Shipyard (P) ltd
29TanjongKling, Singapore 628054

Responsibilities:

• Perform incoming material inspection. Visual inspection on material, verify heat number, material spec & size against mill certificate & purchase order and Prepare incoming inspection report.
• Monitor the storage, backing and handling of welding consumable. In accordance with manufacture approved procedure.
• Perform fit-up inspection, as per approved W.P.S
• Monitor workmanship from time to time, inclusive welder qualification, WPS and welding sequence, pre-heating and etc
• To ensure all fabrication works are fabricated according to approved drawings & latest revision.
• Review shop assembly drawings against engineering drawings to ensure compliance.
• To ensure all fabrication works are comply with relevant project specification & classification requirements
• Arrange and co-ordinate Non-Destructive Tests (NDT).
• Liaise and co-ordinate with classification surveyor & ship owner representative to carry out inspection
• Prepare and comply all relevant fit-up / final inspection records
• Review Dimension reports of all sub blocks, major blocks & Erection blocks
• Review radiography films
• Preparing Welding Procedures & Arrange Welder Qualification Test’s
• Checking Air test for steel work
• Doing line check for pipe line’s
• Pressure testing the pipe line.

PROJECTS INVOLVED:

Project & Project No Petro Jack-I & II (11-1081/82)
Year / Type 2005 / 2006 New Building
Client PETRO JACK
Nature of Job Structural & Piping Inspector (QA/QC)

Project & Project No: Independence Hub Project / 11-1074
Year / Type: 2005 / New Building Semi Submersible
Client: Atlantis Offshore Ltd.(SBM)
Nature of Job: Structural & Piping Inspector (QA/QC)

Project & Project No : Petrobras 50 / 21-8668
Year / Type : 2004 / Conversion FPSO
Client : Petrobras N.V
Nature of Job: QA/QC Inspector

Project & Project No : Development Driller II / 11-1072
Year / Type : 2003 / New Building Semi Submersible
Client : Global Santa Fe
Nature of Job: QA/QC Inspector

Project & Project No : Development Driller I / 11-1071
Year / Type: 2002 / New Building Semi Submersible
Client : Global Santa Fe
Nature of Job: QA/QC Inspector

Project & Project No : Asean Explorer / 11-1064
Year / Type: 2002 / New Building Cable Ship
Client : APCL Marine Pte. Ltd
Nature of Job: QA/QC Inspector
Project & Project No: Petrobras 43 / 21-8338
Year / Type : 2001 – 2002 / Conversion FPSO
Client : Kellong, Brown & Root
Nature of Job : Q Pressure testing the pipe line A/QC Inspector


Career History:

Joined Jurong Integrated Services (P) Ltd, during the year August 2001 as a Structural QA/QC Inspector and I was assist to my senior for my first project during this period I learnt many things for the next project I took charge for overall structure work for new building and in the middle of 2002 promoted as a QA/QC supervisor, during the year 2002 to 2005 fully in charge for structural and outfitting for various project and familiar with AWSD1.1 welding code and ABS shipbuilding rules. In December 2004 I was qualified as certified welding inspector (CSWIP 3.1) by TWI and in February 2005 I was qualified as Occupational Health and Safety Assessment Series (OHSAS) internal auditor, certified by ABS. and in Feb 2006 I was successfully completed the Auto Cad Level-1 in NTUC learning Hub which was certified by Auto Desk.

Professional Qualification : WELDING INSPECTOR
CERTIFIED SCHEME OF WELDING
INSPECTION PERSONNEL (CSWIP).
CSWIP 3.1 issued
by TWI, UK.
Occupational Health & Safety Assessment
Series (OHSAS 18001 Internal Auditor)

Familiar to the Codes: AWS D 1.1, ASME B31.1, 31.3, SecIX and ABS Rules

Computer Abilities : MS Word, MS Excel, AutoCAD Level-1

Good in production supervisoin along with quality