CV ENGINEER FOR GAS TURBINE, 6 YEARS EXPERIENCE IN OTHER ENGINEERING JOBS

Resume built for oil and gas job opportunities by a jobseeker with experience in ENGINEER FOR GAS TURBINE, 6 YEARS EXPERIENCE IN OTHER ENGINEERING JOBS - would you like to offer this candidate a job/contract employment?

CV/Resume ID no.: 86895
Last Updated: Sunday, November 30, 2008

The Manager
Human Resources Department

Dear Sir/Madam;
In this age of emerging global competitiveness, there’s nothing like hiring competent, aggressive and fast-learning personnel. Fortunately, I just happen to be one of those few who have the edge and self-esteem.

In anticipation of your need for highly motivated and competent APPRENTICE ENGINEER, I had no second thoughts of applying in one of the world’s leading company that is highly competitive, diversified and dynamic such as yours.

I am a Filipino, currently residing in Umm Hurair1, Bur Dubai, Dubai, UAE. I am well-versed in both English and Filipino languages. I had a dedication to my work with the highest degree of integrity and commitment. Willingness to undergo training for the improvement of productivity and achieve goals, targets and best performance ability with less supervision.

My more than 6 years of Mechanical experience in workshops
maintenance and fabrication, topped with 1 year and 4 months familiarity on IBS computer designs & telecom implementation (commissioning, configuration & troubleshooting), all enhanced my flexibility and versatility in performing and executing assigned tasks beyond what is expected and in dealing with people of all sorts.

Furthermore, being quite adaptable and very eager to learn, I am more after what I could contribute to meet organizational goals and objectives, and on what I could emerge in the company as a part of my scope of work.

Attached herewith is my Curriculum Vitae for your perusal and favorable consideration. Looking forward to be interviewed in person for further relevant information about my authenticated credentials and to conduct actual proof of my skills. I am available for an interview at a time convenient to you.

I shall be delighted to hear from your good office soon. Thank You!

WORK EXPERIENCE

AVS Technologies – Manta Wireless System LLC.
P.O BOX 213365 Dubai, United Arab Emirates
Implementation Department
Telecom Implementation Assistant August, 2008 – Present
Project Handled: DU-IBS(In Building Solutions)
Site: AUH0340 Emirates Palace, Abu Dhabi, U.A.E
DXB0047 MADINAT JUMEIRAH A (AL QASR), Dubai, U.A.E
Duties & Responsibilities:
 Telecom Implementation of In Building Solutions NOKIA - DU projects in Dubai, U.A.E.
 Site works doing the VSWR test (Voltage Standing Wave Ratio) of Active Design.
 Calibrates ANRITZU S331D Site Master using Open/Short/Load port calibrator.
 Executes VSWR for the RF cables such as LDF2, LDF4, LDF5 AND LDF 7.
 Troubleshoots feeder cable connectors for failed test cables.
 Checks Diplexer’s connection from RAU (Radio Access Units) to OMNI antenna.
 Checks and take notes of proper labeling of each units RAU, Omni and Diplexer or Combiner.
 Troubleshoots alarms at the RAU.
 Taking notes of antenna location to identify by the RF engineers if it need to be rectified
or approved for AS BUILT documentations.
 Reports to the BTS Engineer for the failed test cables to execute rectifications.
 Uploads all VSWR results from site master to computer for name editing and double
checks results of SWR (Standing Wave Ratio), RL (Return Loss) and DTF-SWR( Distance to Fault using ANRITZU HHT software.
 Rectifies equipment location according to standard and applies ISO discipline at the equipment room and executes proper cable grooming and labeling.
 Executes commissioning using Nokia BTS Manager Software and Admin manager LGC Wireless software for LGC Unison Main Hub, Accel Hub and Ultrasite Edge(2G) BTS under supervision of BTS Engineer.
 Executes RF cable system gain from BTS to downlink port of main hub using
ANRITZU S332D Spectrum Analyzer.


AVS Technologies – Manta Wireless System LLC.
P.O BOX 213365 Dubai, United Arab Emirates
Operation Department
CAD Engineer July, 2007 – July,2008
Project Handled: DU-IBS(In Building Solutions) United Arab Emirates
Duties & Responsibilities:
 Designs the In Building Solutions NOKIA - DU projects in Dubai, U.A.E.
 Visits the site locations for Technical Site Survey Report (TSSR) and proposed location of Microwave Monopole Antenna at the roof top with correct azimuth in degrees facing outdoor Monopole or Far End under the supervision of site engineer.
 Designs proposed location of wireless Omni and Panel antennas with RAU(Radio Access Unit), fiber optic, feeder cables and equipments room on the floor layout under the supervision of RF Engineers.
 Designs schematic diagrams, hub racks (42U and 15U) and BTS configuration (2G and 3G) with BTS and RF engineers coordination.
 Executes Detailed Drawing Design (DDD) for site perspective location, 3D Microwave Antenna pole mounting layout showing GSM and WCDMA, BTS (Base Transceiver Station) and Hub Rack equipment location and Electrical wiring layouts.
 Visits the site after or during implementation for the AS BUILT design of DDD and Antenna Location layout.
 Visits the integrated site for the S.O.A.R (Site On Air Report) with the supervision of RF and Optimization engineers to do the walktest of 2G, 3G Unlock, 3G Lock,Test call, Video call, HandOver and Spillage using NEMO software.
 Site done for walktest Jumeirah Beach Hotel, IBN Batuta Mall, Al Meraikhi, Khalid Al Attar and Oasis Towers in United Arab Emirates.
 Exposure of LOS ( Line Of Sight) survey.
 Printed the design by A3 or A4 sizes.

IE Engineering Services Co. August, 2005 – February, 2007 Cebu City, Philippines 6000
Assistant Technician (Car Pool Section and Mechanical Department)
Duties & Responsibilities:
 Assist the mechanical technician in overhauling, re-boring, minor welding operations, reconditioning motor engine, under chassis and body repair and parts replacement.
 Troubleshoot s minor engine defects and brake repair and replacement.
 Check electrical wirings malfunction and advise proper reconnection for troubled connections.
 Install electrical building connection either parallel or series connection circuit.
 Organize preventive maintenance routine in all company car units and workshop equipments.
 In-charge to organize all tools and equipments in the workshop.
 Attended electrical safety LOCK OUT-TAG OUT seminars.

IE Engineering Services Co.
AutoCAD Operator (Workshop Section) July, 2004 – July, 2005
Cebu City, Philippines 6000
Duties & Responsibilities:
 Analyzing the job order into actual precise measurements and tolerance using micrometer
and vernier caliper.
 Execute the 2D or 3D detailed drawing in all machining fabrications and production jobs and
coordinates with the supervisor for the specifications needed.
 Report technical problems during general meeting with project team for the project status.

IE Engineering Services Co.
Lathe Machine Operator(Workshop Section) April, 2001 – June, 2004
Duties & Responsibilities:
 Machining to fabricate or rebuild defective parts of any machine or engine..
 Troubleshoot and replaced minor repairs for workshop equipments.
 Performs cylinder head facing, re-boring, taper turning, threading, and any engineering works.

 CNC LATHE PROGRAMMER-OPERATOR November, 2006
TESDA 7 – MIAP TRAINING CENTER
Cebu City, Philippines 6000
 AUTOCAD ( Computer Aided Design ) February, 2004
TESDA 7 – MIAP Cebu Center
Cebu City, Philippines 6000
 LATHE MACHINE STTER OPERATOR December, 2003
TESDA 7 – MIAP Cebu Center
CEBU CITY, PHILIPPINES 6000
 REFRIGERATION AND AIR CONDITIONING REPAIR December, 2002
TESDA 8 – Tacloban Chapter
Inopacan, Leyte, Philippines 6522

 Computer and Internet Literate
- AutoCAD 2008
- Adobe Photoshop 7.0, MS WORD and MS EXCEL.

 Electrical Works and Installations following the Standard Electrical Code.
 Knowledgeable in Health, Safety And Environment procedures.
 Petrol Engine Troubleshoot and replacement.
 Technical knowledge of A/C’s and Home Appliances repair and replacement.
 Basic Welding and Plumbing works.
 Knows how to used measuring tools like micrometer and vernier caliper (English/Metric).